• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.114-117
• /
• 2001

A higher order zig-zag plate theory is developed to refine accurately predict fully coupled of the mechanical, thermal, and electric behaviors. Both the displacement and temperature fields through the thickness are constructed by superimposing linear zig-zag field to the smooth globally cubic varying field. Smooth parabolic distribution through the thickness is assumed in the transverse deflection in order to consider transverse normal deformation. Linear zig-zag form is adopted in the electric field. The layer-dependent degrees of freedom of displacement and temperature fields are expressed in terms of reference primary degrees of freedom by applying interface continuity conditions as well as bounding surface conditions of transverse shear stresses and transverse heat flux The numerical examples of coupled and uncoupled analysis are demonstrated the accuracy and efficiency of the present theory. The present theory is suitable for the predictions of fully coupled behaviors of thick smart composite plate under mechanical, thermal, and electric loadings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.567-574
• /
• 2000

The purpose of this study is to examine mineralogical properties of the soft clay that is distributed widely in Samsan area, Ulsan. XRD analysis were examined to find the quantities of the clay minerals. And XRF, SEM and EDX analysis were also examined to investigate the chemical compositions and the structures of the clay. The properties of the samples from 2 sites in Samsan area were that the minerals of the clay were illite, kaolinite, chlorite, smectite and etc.. The plenty of illite has 38 to 53% of content in whole study area. And kaolinite had 18 to 30%, chlorite had 15 to 25%, and smectite had 4 to 12% of content, respectively. The results of SEM observation showed that appearances of Ulsan clay were sheet, plannar or needle form. Ulsan clay included the salt crystal of cubic and the foraminifera, which were related with the content of organ.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.837-842
• /
• 2010

This paper describes the crystallinity, growth rate, and surface morphology of single crystalline 3C-SiC (cubic silicon carbide) thin films grown with several carbonization conditions such as temperature, $C_3H_8$ flow rate, time. In case of carbonization, an increase in the carbonization temperature caused a increase in the size and numbers of unsealed void (big black spot) which decrease the crystallinity. In addition, optimal $C_3H_8$ flow rate made carbonization layer form well and prevented the formation of voids. Also, after a period of time, the growth of carbonization layer did not increase no more. The single crystalline 3C-SiC thin films on optimal carbonized Si substrate showed an improvement on the crystallinity, the growth rate, the roughness, and the carrier concentration.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 춘계학술발표대회 논문집
• /
• pp.59-62
• /
• 2006

This design plan aims at the presentation of the representative character of Design Center by making a new image of the cafeteria that is located in the 1. floor. To create an ambience of intercommunication and relaxation, it must be set up the basic concepts like Mobility, Flexibility, Transparence and Color-Play. As the design solutions : - first of all the 360 grade reversible and removable dividers are installed around the 5 pillars - in accordance with the basic concepts Mobility and Flexibility the cubic form construct that plays not only a role of a kitchen, but also a role of a counter, is designed to be relocated at one's own. - the various kinds of seating module and the chill-out zone are introduced to bring out the functionality and the aestheticity simultaneaously - to make a contrasting image to the glass surface of the yellow-, orange- and red-colored dividers, the black chairs and tables are arranged in the middle.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.699-708
• /
• 2004

Natural gas hydrate typically contains 85 wt.% water and 15 wt.% natural gas, and commonly belongs to cubic structure I and II. When referred to standard conditions, 1 ㎤ solid hydrate contains up to 200㎥ of natural gas depending on pressure and temperature. Such the large volume of natural gas hydrate can be utilized to store and transport a large quantity of natural gas in a stable condition. In the present investigation, experiments were carried out for the formation of natural gas hydrate governed by pressure, temperature, gas compositions, etc. The results show that the equilibrium pressure of structure II is approximately 65% lower and the solubility is approximately 3 times higher than structure I. It is also found that for the sub-cooling of structure I and II of more than 9 and 11 K respectively, the hydrates are rapidly being formed. It is noted that utilizing nozzles for spraying water in the form of droplets into the natural gas dramatically reduces the hydrate formation time and increases its solubility at the same time.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.199-205
• /
• 2005

Polycrystalline cadmium sulfide(CdS) thin films were deposited on glass substrate by chemical bath deposition(CBD) and vacuum evaporation (VE) techniques. VE-CdS films consisted primarily of hexagonal phase, whereas CBD CdS films containing primarily the cubic form. VE-grown films were shown to have better crystallinity than CBD-grown films. The grain size of the CBD films is smaller than the ones of VE films. VE-CdS films exhibited relatively high transmittance in the above-gap region and band gap compared with CBD films. However, CdTe solar cells with these low quality CBD-CdS layers yield higher and more stable characteristics. Current-voltage-temperature measurements showed that the current transport for both cells was controlled by both tunneling and interface recombination but the cells with CBD-CdS displayed less tunneling.

• 한국결정학회지
• /
• 제11권1호
• /
• pp.52-57
• /
• 2000

Hydrothermal synthesis of find CeO₂ powder has been investigated. Synthesis was performed with Ce(NO₃)₃·6H₂O, in ethanol and water solution. Mineralizer were NH₄OH and KOH and reaction for the powder synthesis has performed at 130℃. The morphology of CeO₂ was nearly spherical in using NH₄OH and cubic form in KOH. Particle size increased with addition of NH₄OH. Ethanol solution was effective to reduced the agglomeration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.249-254
• /
• 1987

This paper presents a new method for generating smooth free-form surface by local correction. B-spline surface is used for its convenience of local correction, and the direction of surface correction is fixed to the average-surface-normal direction. The surface to be corrected is approximated into a uniform cubic B-spline surface. Then, the smoothness (curvature arrows, iso-parametric lines) of the approximated surface is displayed with B-spline control points. When a control point near the region that needs correction is selected, a new point 1 mm higher than the original control point in the direction of the average surface normal is displayed. And the surface is corrected by giving the amount of control point movement interactively. Since the direction of correction is given by the program and the amount of correction is selected by the user, the method is called semiautomatic. sufficiently smooth surface can be obtained by this method. Examples are given to illustrate the method.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.29-35
• /
• 2003

The purpose of this study is to analyze the architectural manifesto and design works characteristics of Walter Gropius. He was the director of Weimar Bauhaus that one of the advanced artificial movements in the early modern period. The almost of the early modern movements was related to the radical ideology and the manifesto. Especially Bauhaus originated from manifesto of artists teaching group with architect Walter Gropius. Therefore, the category of the study pitch upon Bauhaus architectural manifesto - Bauhaus Manifesto and Programme(1919) - and the representative works of Walter Gropius - Fagus Factory(1911-14), Dessau Bauhaus Building(1925-26), Siedlung Berlin-Siemensstadt(1929-30) and Harvard Graduate Center(1949). The conclusions of the study as per the above mentioned pill pose are the dynamic integration by non-symmetry in cubic form (formal characteristics) and organic continuity by reciprocality in transparent space (spatial characteristics).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.15-15
• /
• 2000

In the past couple of years, there has been increasing interest in the fusion of neural networks and fuzzy logic. Most of the existing fused models have been proposed to implement different types of fuzzy reasoning mechanisms and inevitably they suffer from the dimensionality problem when dealing with complex real-world problem. To overcome the problem, we propose the self-organizing networks with activation nodes based on fuzzy inference and polynomial function. The proposed model consists of two parts, one is fuzzy nodes which each node is operated as a small fuzzy system with fuzzy implication rules, and its fuzzy system operates with Gaussian or triangular MF in Premise part and constant or regression polynomials in consequence part. the other is polynomial nodes which several types of high-order polynomials such as linear, quadratic, and cubic form are used and are connected as various kinds of multi-variable inputs. To demonstrate the effectiveness of the proposed method, time series data for gas furnace process has been applied.