• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.1-13
• /
• 2016

This study attempts to establish a precise forecast model for the container inventory demand of shipping companies through forecasts based on equipment type/size, ports, and weekly system dynamics. The forecast subjects were Shanghai and Yantian Ports. Only dry containers (20, 40) and high cubes (40) were used as the subject container inventory in this study due to their large demand and valid data computation. The simulation period was from 2011 to 2017 and weekly data were used, applying the actual data frequency among shipping companies. The results of the model accuracy test obtained through an application of Mean Absolute Percentage Error (MAPE) verified that the forecast model for dry 40' demand, dry 40' high cube demand, dry 20' supply, dry 40' supply, and dry 40' high cube supply in Shanghai Port provided an accurate prediction, with $0%{\leq}MAPE{\leq}10%$. The forecast model for supply and demand in Shanghai Port was otherwise verified to have relatively high prediction power, with $10%{\leq}MAPE{\leq}20%$. The forecast model for dry 40' high cube demand and dry 20' supply in Yantian Port was accurate, with $0%{\leq}MAPE{\leq}10%$. The forecast model for supply and demand in Yantian Port was generally verified to have relatively high prediction power, with $10%{\leq}MAPE{\leq}20%$. The forecast model in this study also had relatively high accuracy when compared with the actueal data managed in shipping companies.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.317-322
• /
• 2010

This paper presents an algorithm generating inverse element over finite fields GF($3^m$), and constructing method of inverse element generator based on inverse element generating algorithm. An inverse computing method of an element over GF($3^m$) which corresponds to a polynomial over GF($3^m$) with order less than equal to m-1. Here, the computation is based on multiplication, square and cube method derived from the mathematics properties over finite fields.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.199-201
• /
• 2003

온라인 분석처리 시스템의 핵심 기술인 큐브를 효과적으로 산출하기 위한 많은 연구들이 이루어 졌다. 이러한 연구는 크게 온라인 분석처리 시스템의 결과 데이터를 저장하는 방식에 의해 MOLAP과 ROLAP으로 구분하여 이루어 졌다. 최근에 온라인 분석처리 시스템에서 큐브 산출에 대한 연구로 다중키 엑세스를 효율적으로 처리하는 다차원 파일 구조를 사용하여 집계 연산의 효율을 높이는 연구가 이루어졌다. 본 논문은 이러한 연구들을 바탕으로 다차원 파일 구조를 사용하여 효과적으로 큐브를 산출하고 결과 값을 미리 저장하는 일반적인 방법을 제안한다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1185-1193
• /
• 1999

최적 스택 필터는 시그널 또는 영상의 임의의 특성 정보를 보존하고자 하는 요구조건에 의해 강제된 구조적 제약 하에서 최대의 잡음제거 효과를 얻을 수 있다. 그리고 임계치 분할 특성과 양의 부울 함수에 기반한 이진 영역에서의 처리 특성은 이 필터가 높은 병렬성을 갖고 있음을 보여준다. 본 논문에서는 두 개의 병렬 계산 모델 MCC(Mesh-Connected Computer)와 CCC(Cube-Connected Computer)에서 최적 스택 필터를 위한 1차원 병렬 알고리즘을 개발한다. 최적 스택 필터의 실행 시간은 주로 이진 median 연산에 의해 결정되고 본 논문에서 제안된 알고리즘은 선형 분리성에 의해 이 연산을 구현한다. 이를 바탕으로, M 레벨의 1-D 시그널의 길이가 L이고 윈도우 폭이 N이라고 가정할 때, 제안된 알고리즘은 {{{{root M times root M`` MCC에서 O(L sqrt{M}`) 시간에 그리고 M 개의 PE를 갖는 CCC에서 O(L log M)시간에 수행될 수 있다. 또한 잡음을 더욱 효과적으로 제거하기 위해 윈도우 폭 N을 증가시킬 때, 제안된 병렬 알고리즘의 계산 시간은 일정하게 유지됨을 보인다.Abstract An optimal stack filter achieves the maximum noise attenuation under the structural constraints imposed by the requirement of preserving certain signal or image features. And the filter provides a high parallelism due to the principles of threshold decomposition and binary processing based on positive Boolean functions(PBFs). In this paper, we develop an one-dimensional parallel algorithm for the optimal stack filter on two parallel computation models, MCC(Mesh-Connected Computer) and CCC(Cube-Connected Computer). The running time of the optimal stack filter depends mainly on the binary median operation and our algorithm realizes this operation by the linear separability. Based on this scheme, our parallel algorithm can be performed in {{{{O(L sqrt{M}`) MCC and inO(L log M) time on CCC with M PEs, when the length of M``-valued 1-D signal is L`` and window width is N`` Also, we show that the computation time of our parallel algorithm keeps constant when the window width N increases in order to achieve the best noise attenuation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1031-1037
• /
• 2012

We study an algorithm that can efficiently find square roots and cube roots by modifying Tonelli-Shanks algorithm, which has an application in Number Field Sieve (NFS). The Number Field Sieve, the fastest known factoring algorithm, is a powerful tool for factoring very large integer. NFS first chooses two polynomials having common root modulo N, and it consists of the following four major steps; 1. Polynomial Selection 2. Sieving 3. Matrix 4. Square Root. The last step of NFS needs the process of square root computation in Number Field, which can be computed via square root algorithm over finite field.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.150-161
• /
• 2013

This paper presents a new system which produces high resolution 3D contents by capturing multiview images of an object using multiple cameras, and estimating geometric and texture information of the object from the captured images. Even though a variety of multiview image-based 3D reconstruction systems have been proposed, it was difficult to generate high resolution 3D contents because multiview image-based 3D reconstruction requires a large amount of memory and computation. In order to reduce computational complexity and memory size for 3D reconstruction, the proposed system predetermines the regions in input images where an object can exist to extract object boundaries fast. And for fast computation of a visual hull, the system represents silhouettes and 3D-2D projection/back-projection relations by chain codes and 1D homographies, respectively. The geometric data of the reconstructed object is compactly represented by a 3D segment-based data format which is called DoCube, and the 3D object is finally reconstructed after 3D mesh generation and texture mapping are performed. Experimental results show that the proposed system produces 3D object contents of $800{\times}800{\times}800$ resolution with a rate of 2.2 seconds per frame.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.8-15
• /
• 2002

For the large scale computation of turbulent flows around an arbitrarily shaped body, a parallel LES (large eddy simulation) code has been recently developed in which domain decomposition method is adopted. METIS and MPI (message Passing interface) libraries are used for domain partitioning and data communication between processors, respectively. For unsteady computation of the incompressible Wavier-Stokes equation, 4-step splitting finite element algorithm [1] is adopted and Smagorinsky or dynamic LES model can be chosen fur the modeling of small eddies in turbulent flows. For the validation and performance-estimation of the parallel code, a three-dimensional laminar flow generated by natural convection inside a cube has been solved. Then, we have solved the turbulent flow around MIRA (Motor Industry Research Association) model at $Re = 2.6\times10^6$, which is based on the model height and inlet free stream velocity, using 32 processors on IBM SMP cluster and compared with the existing experiment.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.514-518
• /
• 2004

This paper presents an algorithm generating inverse element over finite fields $GF(3^{m})$, and constructing method of inverse element generator based on inverse element generating algorithm. A method computing inverse of an element over $GF(3^{m})$ which corresponds to a polynomial over $GF(3^{m})$ with order less than equal to m-l. Here, the computation is based on multiplication, square and cube method derived from the mathematics properties over finite fields.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.25-26
• /
• 2010

대용량 데이터의 효율적 분석을 위해 데이터 뷰브가 연구되었으며, 데이터 큐브 계산의 고비용 문제점을 해결하기 위하여 큐브의 일부 영역만을 계산하는 빙산 큐브가 등장하였다. 빙산 큐브는 저장 공간의 감소, 집중적인 분석 등의 장점이 있으나, 여전히 많은 계산과 저장 공간을 필요로 하는 단점이 있다. 본 논문에서는 이러한 문제점을 해결하는 실용적인 방법으로 대용량 문제를 분산하여 처리하는 분산 병렬 컴퓨팅 기술인 맵리듀스(MapReduce) 프레임워크를 사용하여 분산 병렬 빙산 큐브인 MR-Naive와 MR-BUC 알고리즘을 제안한다. 실험을 통해 맵리듀스 프레임워크를 통한 빙사 큐브 계산이 효율적으로 분산 병렬 처리 됨을 확인하였다.