• Journal of Nutrition and Health
• /
• v.32 no.3
• /
• pp.277-286
• /
• 1999

This study was conducted to assess dietary intake and nutritional status of zinc and copper in Korean college women. Dietary survey was conducted by 24-hour recall method and fasting serum samples were collected from 111 apparently healthy subjects. Intake levels of zinc and copper were calculated using newly developed database for Zn & Cu of Korea food. Serum levels of Zn, Cu and activities of ALP, EC-SOD were measured from fasting serum sample. Mean daily zinc and copper intakes were 6.72mg/day(56.0% RDA) and 1.11mg/day respectively. Mean values of serum ALP activity, zinc and copper concentration were 43.9U/L, 14.8umol/1, 15.5umol/1and these values were mostly within normal range. EC-SOD activitis of the subjects were low and had no correlation with intake or serum levels of Zn, Cu. In conclusion, these results show that zinc and copper intake of Koran college women are lower than those from other counties but higher than those of adults in rural area of Korea. Their serum levels of Zn, Cu, ALP are relatively normal. These results indicate that marginal deficiency of Zn and Cu may be quite prevalent in these subjects but serum indicators measured may not be sensitive enough to detect such marginal deficiency. Further study in needed to develop a biochemical index sensitive enough to evaluate Zn and Cu status.

• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.256-261
• /
• 2011

In order to make a $Cu_2ZnSnSe_4$ (CZTSe) sputtering target sintered for solar cell application, synthesis of CZTSe compound by solid state reaction of Cu, Zn, Sn and Se mixed powders and effects of ball milling condition on sinterability such as ball size, combination of ball size, ball milling time and sintering temperature, was investigated. As a result of this research, sintering at $500^{\circ}C$ after ball milling using mixed balls of 1 mm and 3 mm for 72 hours was the optimum condition to synthesis near stoichiometric composition of $Cu_2ZnSnSe_4$ and to prepare sintered pellet with high density relatively.

• 한국해양학회지
• /
• v.18 no.1
• /
• pp.49-54
• /
• 1983

sediments were collected from 23 ststions in Jinhae Bay and Cd, Cr, Cu, Fe, Ni, Mn, Pb and Zn were determined by atomic absorption spectrohotometry. The concentrations of Cd, Cr, Cu, Pb and Zn in the sediments decreased gradusally with increasing distance from the gead of Masan Bay, indicating pollutant transport from industrial and municipal wastewaters. But the levels of Co, Fe, Ni and Mn showed no difference througout the bay. analysis of correlation coefficients showed that Cd, Cr, Cu, Pb and Zn in the sediments were [losely associated to one another, whereas co, Fe and Ni were so associated.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.97-100
• /
• 2015

The kesterite $Cu_2ZnSnSe_4$ (CZTSe) thin film solar cells were synthesized by selenization of sputtered Cu/Sn/Zn metallic precursors on Mo coated soda lime glass substrate in Ar atmosphere. Cu/Sn/Zn metallic precursors were deposited by DC magnetron sputtering process with 30 W power at room temperature. As-deposited metallic precursors were placed in a graphite box with Se pellets and selenized using rapid thermal processing furnace at various temperature ($480^{\circ}C{\sim}560^{\circ}C$) without using a toxic $H_2Se$ gas. Effects of Selenization temperature on the morphological, crystallinity, electrical properties and cell efficiency were investigated by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD), J-V measurement system and solar simulator. Further details about effects of selenization temperature on CZTSe thin films will be discussed.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.175-185
• /
• 1993

Soils and dusts collected from Changhang smelter area were analyzed for Cu, Pb, Zn, and Cd in order to determine their dispersion pattern and mode of occurrences, and to investigate the pollution level of heavy metals such as Cu, Pb, Zn, and Cd by smelting activity. The soil pH of Changhang area is in the range of 3.7~8.8, and increased with increasing distance from the smelter site. The particles containing heavy metals are several tens of ${\mu}m$ in diameter, and have well crystal form. Samples collected near the smelter show similar particle properties in size, shape, and composition, which means that they could be originated from the same contamination source. Element couples of Cu, Pb, Zn, and Cd indicate high correlation with each other, which means that Cu, Pb, Zn, and Cd could be originated from the same point source of smelter. Heavy metal contents were decayed to background levels from 2.5 kilometer away from the smelter.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.5
• /
• pp.257-261
• /
• 2006

Scandium(Sc) in Al-Zn-Mg-Cu based Al alloy on precipitation phenomenon was compared to a 7001(Al-7.2%Zn-3.2%Mg-1.8%Cu) Al alloy. GP zone and ${\eta}^{\prime}$ phases were the main strengthening phases at low aging temperature under $100^{\circ}C$, but ${\eta}^{\prime}$ and $Al_3Sc$ phases were the main strengthening phases at high aging temperature above $1600^{\circ}C$ in Sc added 7000(Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr) Al alloy. With the addition of 0.1%Sc in 7000 Al alloy, the activation energy for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phase decreased compared to the 7001 Al alloy. This result indicates that the Sc accelerated the precipitation for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phases in 7000 Al alloy. Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr-0.1 Sc alloy has higher strength than 7001 Al alloy, which has high strength.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.3 s.54
• /
• pp.267-273
• /
• 2006

Concentrations of four essential metals (Fe, Cu, Mn and Zn) were determined in apparently oil-polluted dead or near-dead three loon species collected in the Busan coast, Korea. Fe, Cu, Mn and Zn concentrations were generally high in liver, and also, Mn and Zn were high in bone. There were significant differences in some tissue concentrations of Fe, Cu, Mn and Zn among three species, but did not show any consistent evidence of species-specific accumulation. Mean concentration of Fe was 11,635$\pm$4010 $\mu$g/g, Cu 64.3$\pm$30.7 $\mu$g/g, Mn 13.1$\pm$2.32 $\mu$g/g, and Zn 121$\pm$24.8 $\mu$g/g in liver of all three species examined. Mn and Zn levels in this study were similar to those of normal loons and other seabirds reported from different countries. However, Fe and Cu liver levels were extraordinarily higher than those of reported. This result suggests that unusual accumulations of essential metals such as Fe and Cu may partially arise from long-term starvation due to oil pollution.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.143-148
• /
• 2004

In the present study, $TiO_2$ imbedded composite powders have been successfully prepared from the (Cu. Zn)/$TiO_2$ composite salt solution. The composite (Cu, Zn)/$TiO_2$ powders were formed by drying the solution at 200~$600^{\circ}C$ in the hydrogen atmosphere. Photocatalytic characteristics was evaluated by detecting the decomposition ratio of aniline blue with UV-visible spectrophotometer(Shimazu Co., UV-1601). Phase analysis of (Cu, Zn)/$TiO_2$ composite powders was carried out by XRD and DSC, and powder size was measured with TEM. The mean particle size of composite powders was about 100mm. As the reduction temperature increases, a few zinc sulfide and oxide phases was formed and copper oxide phase was reduced. The decomposition ratio of aniline blue was about 80％ under the UV irradiation by the TiO$_2$ phase in the composite (Cu, Zn)/$TiO_2$ powders and similar decomposition ratio of 80％ was obtained at the UV lightless condition by virtue of Cu and Zn compounds.

• Plant Resources
• /
• v.7 no.3
• /
• pp.163-169
• /
• 2004

To investigate the defense mechanism against the abiotic stress, a cDNA clone encoding a CuZn superoxide dismutase (CuZnSOD) protein was isolated from a cDNA library prepared from tabroot mRNAs of Codonopsis lanceolata. The eDNA, designated ClSODCc, is 799 nucleotides long and has an open reading frame of 459 bp with a deduced amino acid sequence of 152 residues. The deduced amino acid sequence of ClSODCc matched to the previously reported CuZnSODs. Consensus amino acid residues (His-45, -47, -62, -70, -79, -119 and Asp-82) were involved in Cu-, Cu/Zn-, and Zn- binding ligands. The deduced amino acid sequence of ClSODCc showed high homologies (82％-86％) regardless of species. Expression of ClSODCc by oxidative stress was increased up to 1 h after treatment and declined gradually. Much earlier and stronger expression of ClSODCc was observed in the cold stress treatment.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.558-567
• /
• 1989

The synthesis of methanol from carbon dioxide and hydrogen was studied for various compositions of Cu/ZnO catalyst system. Effect of the composition ratio of CuO and ZnO on the catalytic activity in the above reaction and the relationship between the activity and the characteristics of the catalysts were explained from the result of surface area measurements, SEM, XRD, and XPS. The major products of the reaction were methanol and carbon monoxide. The selectivity to methanol increased with increase of the copper oxide content in the catalyst up to CuO: ZnO = 30:70 weight ratio, and decreased rapidly when the content is above 70%. SEM and BET measurements, indicate that this point corresponds to the increasing point of the catalyst crystallite size and the decreasing point of the surface area. As to the Cu/Cu + Zn atomic ratio, the surface concentration of copper measured by XPS decreased remarkably when the copper oxide content in catalyst was higher than 50%. All the unreduced catalysts had almost same binding energy of Cu(2P3) level, but the binding energy for $Cu(2P^3)$ level of reduced catalysts was lowered than that of calcined catalysts. The surface copper species which was in the maximum amount when the CuO:ZnO composition in the catalyst was 30:70, existed as zero valent copper. This result agreed with the experimental result that the highest rate of methanol formation was observed when the CuO content in the catalyst was 30%. It was postulated that these reduced catalysts performed with a relatively strong basicity because the formation rate of acetone was higher than that of propylene in isopropanol decomposition as measured in a pulse type reactor.