• 제목/요약/키워드: CuInS-ZnS

검색결과 990건 처리시간 0.033초

GAP 모델 확립을 위한 토마토 농장 수확단계의 위해요소 조사 및 분석 (Risk Analysis for the Harvesting Stage of Tomato Farms to Establish the Good Agriculture Practices(GAP))

  • 이채원;이치엽;허록원;김경열;심원보;심상인;정덕화
    • 농업생명과학연구
    • /
    • 제46권4호
    • /
    • pp.141-153
    • /
    • 2012
  • 본 연구에서는 안전한 토마토를 생산하기 위한 농산물우수관리제도(Good Agriculture Practices; GAP) 모델 확립의 기초 자료를 제공하고자 경남에 소재한 토마토 재배 농가 중 토경 재배 3 농가와 양액 재배 3 농가를 대상으로 수확단계에서의 생물학적(위생지표세균, 병원성 미생물, 곰팡이), 화학적(중금속, 농약) 및 물리적 위해요소를 조사하였다. 먼저 생물학적 위해요소 분석결과, 일반세균과 대장균군은 토경재배 농장의 토양에서 최대 7.5 및 5.0 log CFU/g으로 양액재배 농장의 양액보다 0.1~2.8 log CFU/g 높은 수준으로 검출되었다. 그 외 다른 시료에서의 일반세균 및 대장균군의 경우 토경재배 농장에서는 1.7~6.5 및 0.3~2.9 log CFU/g, leaf, mL, hand or $100cm^2$로 검출되었고 양액재배 농장에서는 각각 1.1~5.7 및 0.1~4.0 log CFU/g, leaf, mL, hand or $100cm^2$로 검출되었다. 대장균은 모든 시료에서 검출되지 않았으며, 곰팡이의 경우 전체적으로 0.2~5.0 log CFU/g, leaf, mL, hand or $100cm^2$ 수준으로 검출되었다. 병원성 미생물은 Bacillus cereus와 Staphylococcus aureus만 양액을 제외한 대부분의 시료에서 검출되었으며, 공중낙하균은 토경재배 농장에서 0.4~1.6 log CFU/plate, 양액재배 농장에서 0.1~1.0 log CFU/plate 수준으로 검출되었다. 화학적 위해요소인 중금속(Cd, Pb, Cu, Cr, Hg, Zn, Ni 및 As)과 잔류농약은 모든 시료에서 국내 허용기준치 이하로 검출되었고, 물리적 위해요소는 다른 위해요소에 비해 발생가능성은 낮지만 유리조각, 캔 등으로 확인되었다.

수경재배 시설원예단지 작물 유형별 배액 특성 및 부하량 평가 연구 (A study on drainage characteristics and load amount evaluation by crop type in a hydroponic cultivation facility of horticultural complex)

  • 진유정;강태경;임류갑;김현우;강동현;박민정;손진관
    • 한국습지학회지
    • /
    • 제23권4호
    • /
    • pp.352-363
    • /
    • 2021
  • 본 연구는 시설원예단지에서 배출되는 배액 내 포함된 영양물질의 부하량을 평가하여 양액 재이용방안 및 수처리장 도입 설계 등에 활용하고자 하였다. 수경재배 대표 재배 작물을 토마토, 파프리카, 오이, 딸기로 선정하여 총 80 샘플을 수질분석하였다. 분석결과 N, P, K+, Na+, Mg2+, Ca2+, Si4+, HCO3-, Cl-, S2-, Fe, Mn, Cu, Zn, Mo, B 등의 각종 비료성분은 배액 내 매우 높은 농도로 함유되어 있어 수처리 필요성을 확인하였다. 통계분석을 통해 딸기의 배액농도가 토마토, 파프리카, 오이보다 낮은 것으로 분석되었으며, 토마토의 경우 이러한 필수이온 농도가 가장 높으므로 비료의 재이용 측면에서는 가치 있는 자원의 대상임을 확인하였다. 시설원예단지 1m2에서 배출되는 배액의 N과 P의 부하량을 분석하였다. N은 1ha 기준 일간 토마토는 4.0kg, 파프리카 3.3kg, 오이 3.0kg, 딸기 1.5kg의 처리용량이 계산되었다. P농도는 일간 토마토 0.5kg, 파프리카 0.6kg, 오이 0.4kg, 딸기 0.2kg을 일간 처리할 수 있는 규모와 용량이 필요하다고 제안하였다. 본 연구를 통해 작물별 시설온실에서 배출되는 배액에 포함된 질소와 인의 양을 평가하여 배액에서의 양분적 가치산정을 통한 경제성 분석과 지속가능한 농업을 위한 시설원예단지의 수처리 시설 도입 시 반영해야 할 처리용량 산정 시 이용할 수 있는 기초자료로 활용되길 기대하였다.

Effects of Microbial Phytase Supplementation to Diets with Low Non-Phytate Phosphorus Levels on the Performance and Bioavailability of Nutrients in Laying Hens

  • Um, J.S.;Paik, I.K.;Chang, M.B.;Lee, B.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권2호
    • /
    • pp.203-208
    • /
    • 1999
  • An 8 week feeding trial was conducted with 864 ISA Brown laying hens, 48 weeks old, to determine if microbial phytase $(Natuphos^{(R)})$ supplementation can reduce non-phytate phosphorus (NPP) level in laying diets. The experiment consisted of four dietary treatments: T1, control diet with 0.26% NPP (0.55% total P) wand no supplementary phytase; T2, 0.21% NPP (0.50% total P) diet with 250 U of phytase/kg of diet; T3, 0.16% NPP (0.45% total P) diet with 250 U of phytase/kg of diet; and T4, 0.11% NPP (0.40% total P) diet with 250 U of phytase/kg of diet. T3 showed the highest egg production and egg weight and the lowest feed conversion while T4 gave the lowest egg production and the highest feed conversion and mortality. Daily feed consumption ranged from 130.4 g (T4) to 132.7 g (T2). T1 and T2 were not significantly different in the production parameters. Eggshell strength, egg specific gravity, and eggshell thickness were not significantly different among treatments. However, broken egg ratio was significantly lower in T2 and T4 than in T1. Retentions of Ca, P, Mg, and Cu were greater in phytase supplemented treatments (T2, T3, and T4) than the control (T1), and those in T3 and T4 were greater than in T2. Excretions of P in phytase supplemented treatments (T2, T3, and T4) were significantly (p<0.05) smaller than in T1 but excretions of N were not significantly different among the treatments. Contents of ash in tibiae were not significantly affected by treatments, but contents of Ca, P, Mg, and Zn was increased and that of Cu decreased by phytase supplementation. It is concluded that the NPP concentration in the diet of Brown layers consuming about 130 g/d of feed can be safely lowered from 0.26% (0.55% total P) to 0.16% (0.45% total P). The excretion of P was reduced by the inclusion of 250 U phytase/kg of diet.

가스 크로마토그래피에 의한 재래주 발효중 알코올과 유기산 분석 (A Study on the Gas Chromatographic Analysis of Alcohols and Organic Acids during Takju Fermentation)

  • 최선희;김옥경;이명환
    • 한국식품과학회지
    • /
    • 제24권3호
    • /
    • pp.272-278
    • /
    • 1992
  • A. kawachii와 A. shirousamii를 사용하여 Koji와 누룩을 만든 것과 자연상태에 존재하는 균류에 의해 담금한 탁주 발효과정 중 alcohol, 유기산 및 무기질 함량을 분석 비교하였다. Alcohol류는 ethyl alcohol이 $0.61{\sim}108.25g/l$이었고 methyl alcohol은 $0{\sim}235.99ppm$이었으며 시험구별로는 KNR구가 ethyl, methyl alcohol 함량이 많았다. 그 외 n-propyl, i-butyl, i-amyl, n-amyl alcohol, acetic acid는 trace-70.95, $0{\sim}39.67,\;0{\sim}18.52,\;0,\;0{\sim}91.96ppm$으로 소량 함유되어 있었다. 유기산은 lactic acid가 $0.43{\sim}1.47ppm$으로 다른 유기산에 비해 많이 함유되어 있었고, 이외에 pyruvic, oxalic. malonic, succinic, maleic, malic, ${\alpha}-keto$ glutaric acid가 시험구에 따라 다소 차이는 있으나 대체로 $0{\sim}3.3,\;0{\sim}4.9,\;1.6{\sim}5.0,\;1.0{\sim}3.8,\;0{\sim}8.6,\;0{\sim}0.2,\;0{\sim}0.5ppb$로 소량 함유되어 있었으며, lactic acid 이외의 유기산은 A. kawachii, A.shirousamii를 사용한 구에서 더 생성되는 경향을 나타내었다. pH는 담금 1일에 $3.82{\sim}5.26$이었으며, 점차 감소, 다시 증가하여 담금 10일에는 $3.42{\sim}3.69$이었다. 시험구별로는 KKR이 가장 낮았다. 총산은 담금 1일에 $0.29{\sim}0.82%$였으며 담금 6일에 $1.75{\sim}2.53%$로 최고값을 나타내었으며 그 후 감소하여 담금 10일에는 $1.61{\sim}2.34%$였다. 시험구간에는 KKR, SKR이 비교적 높은 값을 나타내었다. 무기질 함량은 발효기간이 경과할수록 증하였고 Ca는 $2.95{\sim}36.76$, Cu는 $0.01{\sim}0.14$, Fe는 $0.71{\sim}3.23$, K는 $110.89{\sim}517.33$, Mg는 $34.78{\sim}122.40$, Mn은 $0.56{\sim}5.98$, Na는 $0.19{\sim}14.36$, Zn은 $0.90{\sim}5.71ppm$을 나타내었으며, 시험구별로 보면 WNR, BNR구가 Na만 제외한 다른 무기성분 함량이 가장 높았다.

  • PDF

한강수계 농업지대에서 토양과 수질 지표에 대한 요인 분석 (Factor Analysis of Soil and Water Quality Indicators in Different Agricultural Areas of the Han River Basins)

  • 정영상;양재의;주진호;김정제;김현정;하상건
    • 한국토양비료학회지
    • /
    • 제32권4호
    • /
    • pp.398-404
    • /
    • 1999
  • 토양과 수질에 영향을 주는 주인자를 찾아내기 위하여 한강 수계에서 집약적 농업이 이루어지고 있는 지역을 대상으로 토양과 수질에 대한 요인 분석을 하였다. 화학성 분석을 위한 토양 시료는 고랭지 농업이 이루어지고 있는 평창군 일대에서 그리고 수질 시료는 한강의 소유역인 구리, 춘천, 둔내 및 대관령에서 1996년과 1997년에 채취하여 분석하였다. 분석된 토양의 질 11요소에 대한 상호 상관분석에서 55개 상관쌍 중 29개 상관쌍의 유의성이 인정되었다. 시료채취 적정성을 위한 전체 Kaiser값은 0.6이었다. 토양의 질 요소 중 부하가 큰값을 보이는 제1요인은 pH, Ca 및 Mg이었다. 제2요인은 인산과 미량요소이었으며, 제2요인은 인산과 미량요소이었으며, 제3요인은 유기물과 EC, 그리고 제4요인은 칼리와 철이었다. 수질 요소 20개의 190개 상관쌍 중 86개 상관쌍의 유의성이 인정되었다. 전체 Kaiser값은 0.74이었다. 수질요소 중 제1요인은 EC로 전체 변이의 27.1%를 차지하였으며 Na, Ca, SO4, Mg, K, Cl, NO3 그리고 T-N이 높은 부하를 보였다. 제2요인은 중금속 중 Zn, Fe, Mn 그리고 Cd이었다. 제3요인에서 제7요인은 각각 PO4, TSS, 무기질소, pH 와 T-P 그리고 Cu이었다. EC 요인 스코어는 구리에서 가장 높았고, 춘천, 둔내 및 대관령의 순이었다. 이 연구 결과는 요인 분석이 농업 소유역에서 토양과 수질에 영향을 주는 주요인 분석 선정에 유용함을 의미하였다.

  • PDF

비철금속(非鐵金屬)의 생산(生産), 소비(消費), 시세(時勢)의 추이(推移) (The Transition of Production, Consumption and Price of Non-ferrous Metals)

  • 문원주
    • 자원환경지질
    • /
    • 제2권3호
    • /
    • pp.1-25
    • /
    • 1969
  • In considering the mining industry, it is necessary to study the production, consumption and price of ore and metals in every country of the world in order to determine the trend of the industry in the present and for the future. This study is necessary especially for exporting domestically produced are which is in excess of domestic consumption and for importing are, or metal where local production does not meet domestic demand. It will be treated of Au, Ag, Cu, Pb, Zn, W, Mo, which are the most important non-ferrous metals, and which greatly affect the mining industry of Korea. The presentation will concern itself only with the free world. About 1, 200 ton of gold are produced annually with little fluctiation in recent years. Most of the gold produced is consumed by advanced countries for industrial uses as well as for producing precious objects. The U.S.A. expends yearly about four times its domestic production and Japan about three times its domestic production for industry and arts. Because of the instability of the currency of the U.S.A., England and France, recently, the price of gold has been $ 41-42 per ounce, whereas the official price is $35.00 per ounce. It will be expected that the official price will be raised in the near future. As for silver, about 6,500 tons are produced annually with no special fluctuation change in recent years. However, the annual consumption is about 14,000 ton, so the supply and demand is extremely unbalanced. The shortage is made up by the sale of the U.S. treasury's reserve stock and the reclaiminig of silver from coins and other scrap. As the Treasury'S reserves will be exhausted in a year or two, the price of silver which is $1. 64 per ounce, will go up drastically in about a year. As for copper, 5,257,000 ton's were mined in 1966. It's production is being increased about 5% annually. However, consumption exceeds production by about 100,000 ton a year. The recent Foreign refinery copper price in the U.S.A is $ 60 per pound. The supply of copper being insufficient to meet international demands, the price will go up and with no prospect of being lowered in the near future even with the slight annual increase in production. About 2,100,000 to 2,200,000 tons of lead are produced annually. Consumption exceeds production by about 50,000-60,000 tons annually. The current price of lead in New York is $ 155 per pound. As the supply of lead is internationally stable, It will be believed that there will be no significant change in its price in the near future. In 1967, 3,926,000 tons of Zinc were produced. There is annual increase of 4-7% in production. The annual consumption exceeds production by 100,000 to 200,000 tons. The current zinc price in the St. Louis market inthe U.S.A. is $ 145 per pound. Even though its supply is stable and sufficient world wide, the consumption rate will increase at a faster pace than before; hence, the price will slowly go up. Tungsten mines yield about 11,000 tons a year. Its production has been relatively constant in the past few years. The amount of its consumption increases slowly world wide, but in the free world· there has been a slight annual decrease. However, since Red China has not been exporting their tungsten to other countries for several months, the price on the London market of S.T.U. of $Wo_3$ has increased to $ 44~46. Should Red China begin to export actively again the price will drop to $ 40~42. In 1967, 56,000 tons of Molybdenum were produced. Production exceeds consumption by 200,000 -30,000 tons annually. The current price in the U.S.A. is $ 1.72 per Mo pound. Since the rate of production in the U.S.A. is on the increase with large amounts of ore reserve, the price of molubdenum should not go up.

  • PDF

초기철기시대 청동기의 제작기술 - 충주 호암동유적과 부여 청송리유적 출토 청동기의 비교 연구- (Bronze Production Technology in the Early Iron Age: A comparative study of bronze artifacts recovered from the Hoam-dong site in Chungju and Chongsong-ri in Buyeo)

  • 한우림;황진주;김소진
    • 헤리티지:역사와 과학
    • /
    • 제51권4호
    • /
    • pp.224-233
    • /
    • 2018
  • 충주 호암동유적 및 부여 청송리유적 출토 청동기 33점의 분석을 통해 초기철기시대 청동기의 제작기술과 납의 산지를 연구하였다. 휴대용X선형광분석기를 이용한 비파괴 성분분석 결과 출토된 청동기 33점은 인위적으로 납을 첨가한 구리(Cu), 주석(Sn), 납(Pb)의 3원계 합금으로 판단된다. 4점의 청동기(동경 2점, 동검 1점, 동모 1점)의 전자탐침미소분석기를 이용한 성분분석 결과 충주 및 부여 출토 동경은 30%의 주석(Sn)과 10% 미만의 납이 포함된 고주석청동기로 확인되었으며 동모와 동검에서는 20% 내외의 주석과 5%의 납(Pb)이 검출되었다. 미량원소로는 철(Fe), 아연(Zn), 비소(As), 은(Ag), 니켈(Ni), 황(S) 및 코발트(Co)가 검출되었다 청동기 4점은 기능적인 면을 고려하여 합금되었으며 주석함량이 높아 주조 이후 열처리는 하지 않았다. 열이온화질량분석기를 이용한 충주와 부여 출토 청동기의 납동위원소비 분석을 통해 초기철기시대 청동기 33점은 Zone 1을 제외한 한반도 남부 전 지역에 걸쳐 분포함을 확인하였다. 이를 통해 충주와 부여에서 출토된 청동기는 경상도 지역의 납 원료를 사용하지 않고 한반도 내 다양한 산지의 납 원료를 사용했음을 판단하였다. 출토지가 달라 제작기술과 원료산지의 차이점이 존재할 것이라 추정하였으나 분석결과를 통해 이 시기의 청동기의 제작기술은 일반화되어 있었으며, 다양한 곳에서 다양한 산지의 원료를 이용하여 청동기를 제작하였음을 추정하였다.

조선업 용접작업장의 공기중 입자상물질 및 구성성분에 관한 연구 (An Evaluation on Airborne Particulate and It's Components in the Welding Workplace for the Ship Construction Industry)

  • 강용선;신중규;이송권;윤충식;임무혁;박만철;심상효
    • 한국산업보건학회지
    • /
    • 제17권3호
    • /
    • pp.245-253
    • /
    • 2007
  • This research was performed to evaluate the airborne personal concentration of hazardouse materials during the process of ship construction and surveyed from May 23 to June 30, 2007 in Kyungnam West Distirct, Korea. The subject was 94 ship construction workers exposed to welding fume and respirable particulate. The airborne concentrations of those were compared to Permissible Exposure Limit(PEL) from the Ministry of Labor in Korea. The airborne concentration of 23 samples(48.9%) of welding fumes was less than $5mg/m^3$, that of 16 (34.0%) was between 5 and $10mg/m^3$, and that of 8 (17.0%) was greater than $10mg/m^3$. The airborne concentration of 27 (57.4%) of respirable particulate masses was less than $5mg/m^3$ and the othere are greater than $5mg/m^3$. The welding fumes were identified containing the heavy metasl such as Fe, Mn, Zn, Mg, Ca, and Cu. The respirable particulates has similiar tendency with welding fumes in the component of heavy metals. But the concentration of Ca, Cu, Cr, and Ni turned out to be higher in welding fumes. Twenty (42.6%) of the 47 samples of welding fumes were exceeded PEL. In the heavy metals in welding fumes, ten (21.3%) of the 47 samples of Mn were exceeded PEL. Based on the results, the higher airborne hazardous materials were still exposed to wokers in ship construction process. It is suggested that the appropriate engineering control be applied to minimize the exposed cocnetration in ship building processes.

EAF Dust사의 중금속을 함침한 활성 규조토가 혼합된 시멘트 모르터의 내화학성에 관한 연구 (A Study on Chemical Resistance of Cement Mortar Blended with Thermally Activated Diatomite containing Heavy Metals form EAF Dust)

  • 류한길;임남웅;박종옥
    • 콘크리트학회지
    • /
    • 제9권1호
    • /
    • pp.143-151
    • /
    • 1997
  • 전기로 집진 분진상의 중금속(Pb, $Cr^{6+}$, Cu, Cd, Zn)을 함침시킨 규조토를 열처리방법($750^{\circ}C$-30분)으로 활성화하였다. 활성규조토로 일반시멘트 모르터의 시멘트양을 중량비로 0%, 2.5%, 5.0%, 10%, 20%까지 대체하고 압축강도와 화학저항성을 조사하였다. 화학저항성 조사에는 습윤건조반복실험(Wetting /Drying Cycle)과 화학침식저항성($H_2SO_4,\; CaCl_2,\; MgSO_4$)이 포함되었다. 결과에 의하면 일반시멘트 모르터에 활성규조토를 시멘트에 10%까지 치환하여 갈수록 압축강도(28일)는 증가하였다. 최고의 압축강도는 활성규조토가 10%까지 치환하였을 때 $496kgf/cm^2$이었으며, 활성규조토가 전혀 혼합되지 아니한 시멘트 모르터의 압축강도($391kgf/cm^2$)보다 약 275까지 증가되었다. 이때 중금속들은 99% 이상의 고정율을 보였으며 Wet/Dry cycle 및 화학침식저항성에서도 활성규조토가 혼합된 시멘트 모르터가 일반 시멘트 모르터보다 훨씬 높은 저항성을 보였다.

비진공법을 이용한 CIGS광흡수층의 합성과 특성평가

  • 권영은;박준태;임기홍;최현광;전민현
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.312.1-312.1
    • /
    • 2014
  • Chalcopyrite계 화합물 반도체인 $Cu(InGa)Se_2$ (CIGS)는 직접천이형 에너지 밴드갭과 전파장 영역에 대하여 높은 광흡수계수($1{\times}$[10]^5/cm)를 가지므로 두께 $1{\sim}2{\mu}m$인 박막형태으로 고효율의 태양전지 제조가 가능하다. 또한, 박막공정의 저가 가능성을 나타내면서 전세계적으로 많은 연구와 관심을 받고 있고, 현재 상용화되어 있는 결정질실리콘 태양전지를 대체할만한 재료로 주목 받고 있다. 일반적으로, CIGS박막형 태양전지 구성은는 유리를 기판으로 하여 5개의 단위 박막인 Mo 후면전극, p형 반도체 CIGS 광흡수층, n형 반도체 CdS 버퍼층, doped-ZnO 상부 투명전극, $MgF_2$ 반사방지막으로 이루어진다. 이들 중에서 태양전지의 에너지 변환효율에 결정적인 영향을 미치는 구성된다. CIGS 광흡수층의 제조는 크게 진공법과 비진공방법으로 나뉜다. 현재까지 보고된 문헌에 따르면 CIGS 박막형 태양전지의 경우에 동시증발법으로 20.3%의 에너지 변환효율을 보였지만,는데, 이는 진공장비 특성상 공정단가가 높고 대면적화가 어렵다는 단점을 가진다. 따라서, 비진공법을 이용하여 광흡수층 제작하는 것이 기술적으로 진보할 여지가 크다고 볼 수 있다. 반면 현재 상용화되어 있는 결정질실리콘 태양전지를 대체할만한 방법으로 주목 받고 있는 비진공을 이용한 저가공정은 최근 15.5%의 에너지 변환효율이 보고 되었다. 비진공법에는 전계를 이용한 증착법 및 스프레이법으로 나뉘며, 이들 광흡수층 재료의 화학적 합성은 III족 원소인 In, Ga의 함량비에 따라 광흡수층의 에너지 밴드갭(1.04~1.5 eV) 조절이 가능하다. 따라서, 본 연구에서는 비진공법에 사용되는 CIGS재료의 화학적 합성조건을 변화시켜 III족 원소의 조성비 조절을 시도하였다. CIGS 분말 시료의 입자 형태와 크기를 FE-SEM을 이용하여 관찰하였고, 화합물의 성분비를 EDX 및 XRD 분석을 통해 Ga 함량에 따른 구조적 차이를 비교해 보았다.

  • PDF