• Carbon letters
• /
• 제7권4호
• /
• pp.249-258
• /
• 2006

Treatment of water hyacinth with sulphuric acid produces carbonaceous materials that have been used to remove Cu(II) and Cd (II) ions from aqueous solutions. Untreated water hyacinth was also used for the subject of comparison. The textural properties of the carbonaceous materials were determined from nitrogen adsorption at 77 K. The optimum pH for the sorption of Cu (II) and Cd (II) ions on the investigated sorbents was determined. Dynamic adsorption measurements have been taken at 298 K whereas equilibrium measurements were carried out at 298, 313 and 323 K. The adsorption of nitrogen at 77 K on the untreated sample was too low and the surface areas of the treated samples 2, 3 and 4 were found between $70-208\;m^2/g$. The total pore volumes of these samples which were determined for the carbonaceous materials investigated were found to be 0.076-0.140 ml/g. The kinetic adsorption data of Cu (II) and Cd(II) were applicable to both pseudo - first and pseudo-second order but fit more the latter order. The equilibrium adsorption data were found to fit Freundlich and Langmiur equations. The values of DG, DH and DS are all negative indicating the feasibility and the spontaneous nature of the sorption of Cu (II) and Cd (II) ions by the sorbents investigated.

• 한국분말재료학회지
• /
• 제4권2호
• /
• pp.106-112
• /
• 1997

$Cu-Al_20_3 $ composite powders were prepared by hydrogen reduction of $Cu^{2+}$ from ammoniacal copper sulfate solution on alumina core using autoclave. The copper reduction rate and the properties of copper layer were investigated using Scanning Electron Microscope(SEM), X-ray diffractometer, size and chemical analyzers. The reduction rate of $Cu^{2+}$ showed the maximum value when the molar ratio of [$NH_3$]/[$Cu^{2+}$] was 2. In order to prevent the agglomeration of Cu powder and ethane reduction rate, $Fe^{2+}$ and anthraquinone which act as catalysis were added in the solution. Catalysis was effectively chanced with the addition of two elemerts at a time. Optimum conditions obtained in this study were hydrogen reduction temperature of 205$^{\cire}C$, stirring speed of 500 rpm and hydrogen partial pressure of 300 psi. Obtained $Cu-Al_20_3 $ composite Powders were found to have the uniform and continuous copper coating layer of nodule shape with 3~5 $\mu$m thickness.

• 대한화학회지
• /
• 제62권3호
• /
• pp.187-190
• /
• 2018

A three-component coupling reaction of phenylacetylene, p-toluenesulfonyl azide, and water through copper catalysis is described to provide knowledge of spectroscopy and catalytic reactions and to introduce current research topics in organic chemistry for second-year undergraduate students. In the presence of stoichiometric amounts of phenylacetylene, p-toluenesulfonyl azide, and triethylamine, the reaction was performed with 4 mol% CuCl in water as the sole solvent and was completed in 1.5 h. A practical purification method and recrystallization of the crude reaction mixture resulted in the rapid isolation of the desired product with yields of 42~65%. Students characterized 4-methyl-N-(phenylacetyl)benzenesulfonamide by using melting-point determination, infrared spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. This experimental procedure and spectroscopic data analysis will serve as a platform for students to apply classroom knowledge in practical state-of-the-art research.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1821-1823
• /
• 2007

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2359-2362
• /
• 2007

MALDI-TOF-MS technique was applied to obtain structural and compositional information of synthetic polyamides, Nylon6 and Nylon66. Mass spectra of both the original and the hydrolyzed polyamide samples were analyzed using the self calibration method as well as the internal calibration method with the standard materials of known masses. The MALDI-TOF mass spectra of Nylon6 samples showed the presence of protonated, sodiated, and potassiated ions that were assigned to cyclic and NH2/COOH terminated linear oligomers. From the MALDI-TOF mass spectra of Nylon66 samples, the potassiated linear oligomers with three different end groups are identified as well as the cyclic oligomers, i.e., NH2/COOH terminated oligomers, NH2/NH2 terminated oligomers, and COOH/COOH terminated oligomers. Full characterization of the molecular species and end groups present in the polyamide samples has been achieved, and also the changes in mass spectral patterns after the hydrolysis of the samples are presented.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.98-102
• /
• 2005

본 연구에서는 유기금속 전구체인(HFAC)Cu(DMB)을 이용하여 구리를 제조하고, 기판온도 및 요오드 화합물이 증착 구리막의 표면 형상 및 충진 특성에 미치는 영향을 살펴보았다. 증착 온도가 높을수록 표면 형상이 거칠어지고 충진 특성이 악화되었으며, 요오드를 사용하여 증착할 경우 표면 거칠기와 충진 특성이 개선됨을 알 수 있었다. 이때 요오드 화합물과 전구체를 동시에 반응기에 유입할 경우보다 구리의 씨앗층을 증착하고 요오드 화화물을 반응기에 유입한 후 다시 구리 증착을 진행하는 경우가 좀 더 효과가 컸다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.377-378
• /
• 2018

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2005년도 제54회 학술발표회
• /
• pp.28-28
• /
• 2005

• 공업화학
• /
• 제10권1호
• /
• pp.154-159
• /
• 1999

수중 금속이온 착화용 공업세정제를 비롯하여 산업적으로 다양한 용도로 폭넓게 사용되고 있는 EDTA (ethylenediaminetetraacetic acid)는 수처리시 금속이온들을 제거할 경우에 방해요인으로 작용하므로, EDTA를 우선적으로 분해하여 착화결합을 끊어야 금속이온들의 제거가 용이해진다. 본 연구에서는, $TiO_2$ (Degussa P-25)를 사용하여 1.79 mM의 초기 Cu(II)-EDTA 수용액 농도와 $20^{\circ}C$의 호기성 분위기 하에서, 촉매의 양과 초기의 수용액 pH가 Cu(II)-EDTA 착물의 산화에 미치는 영향을 고찰하였다. $TiO_2$량이 2.0 g/L일 경우에 EDTA, Cu와 TOC 감소율이 최대로 나타났고, DETA의 촉매표면 흡착은 $TiO_2$ 표면전하에 의해 영향을 받으며 광-촉매 반응에 의한 EDTA의 분해는 광-조사전의 촉매표면 흡착에 의존하는 것으로 보였다.

• 분석과학
• /
• 제8권4호
• /
• pp.443-448
• /
• 1995

Three anode configurations of six-jet, cone-jet and cylindrical-jet are tested for their analytical performance under power mode operation. The effect of pressure, power and gas flow rate on atomic absorption signals have been studied. The increase of atomic absorption signal of sample element is observed at a fixed pressure in all configurations as the gas flow rate increase up to 300-600 seem, and as the power dissipated in the glow discharge cell increase. The lower the pressure is in the glow discharge cell at a fixed discharge power and argon flow rate, the greater the absorbance of sample element is. The optimum conditions are taken from these data and a calibration curve of Cu in low-alloy steel sample is obtained. In this calibration curve, six-jet configuration shows the best analytical results varies as the sample element.