• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.389-389
• /
• 2012

Molybdenum is one of the most important materials used as a back ohmic contact for $Cu(In,Ga)(Se,S)_2$ (CIGS) solar cells because it has good electrical properties as an inert and mechanically durable substrate during the absorber film growth. Sputter deposition is the common deposition process for Mo thin films. Molybdenum thin films were deposited on soda lime glass (SLG) substrates using direct-current planar magnetron sputtering technique. The outdiffusion of Na from the SLG through the Mo film to the CIGS based solar cell, also plays an important role in enhancing the device electrical properties and its performance. The structure, surface morphology and electrical characteristics of Mo thin films are generally dependent on deposition parameters such as DC power, pressure, distance between target and substrate, and deposition temperature. The aim of the present study is to show the resistivity of Mo layers, their crystallinity and morphologies, which are influenced by the substrate temperature. The thickness of Mo films is measured by Tencor-P1 profiler. The crystal structures are analyzed using X-ray diffraction (XRD: X'Pert MPD PRO / Philips). The resistivity of Mo thin films was measured by Hall effect measurement system (HMS-3000/0.55T). The surface morphology and grain shape of the films were examined by field emission scanning electron microscopy (FESEM: Hitachi S-4300). The chemical composition of the films was obtained by the energy dispersive X-ray spectroscopy (EDX). Finally the optimum substrate temperature as well as deposition conditions for Mo thin films will be developed.

• Economic and Environmental Geology
• /
• v.33 no.3
• /
• pp.181-193
• /
• 2000

This study was undertaken to evaluate the drinking water quality based on physicochemical properties and chemical compositions of the supply water in the Daedeok Campus, and to verify the analytical reliabilities of ICP-MS and IC equipped in the Central Research Facilities at Chungnam National University , Korea. The supply water belongs to $Ca^{2+}-({HCO_3}^-+{SO_4}^{2-})$type, whereas the original water from the Daecheong lake belongs to $(Ca^{2+}-(Mg^{2+})-{HCO_3}^-$ type. Generally, temperature (14.1$^{\circ}C$), pH (6.95), Eh (0 mV), electrical conductivity (117${\mu}$S/cm) and TDS (86.975mg/l) of supply water were higher than those of original lake water . Results using WATEQ4F revealed that potentially toxic ions of the supply water might exist mainly as free metals ($M^{2+}$) and a small amount as ${CO_3}^{2-}$ and $OH^-$ complexes. Also, the water composition belongs to the kaolinite field. Calculated average enrichment indies of the supply water normalized to lake water for anions, mamor cations, toxic cations and total ions are 1.05 , 1.56, 13.05 and 1.17 , respectively. Those values of the ground water in the Daedeok Campus showed 1.71, 4.78, 5.71 and 2.49 , respectively. However , contents of all constituents of these water are within the drinking water standard. All samples were filtered before the chemical analysis. Pale yellow or yellowish brown colored materials of colloidal particles coated the filter paper to thickness of 0.02 to 0.2mm. these are mainly Fe-Cy-Zn compounds with traces of Ni and Pb, the net weights of which compounds range from 0.01to 3.20mg/l. Most elements did not show any conceivable filtering effect of Cu, Fe and Zn. Especially, mean concentration of total Fe decreased considerably from 168.52${\mu}g$/lto 42.58${\mu}g$/l by filtering .

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.387-396
• /
• 2012

A study was conducted to determine the dietary effects of Na-bentonite (NaB) and probiotics on meat characteristics and health of Hanwoo steers fed rice straw as a sole roughage source. A total of 24 growing Hanwoo steers (avg BW 232 kg) were assigned to two treatments which included a control diet (concentrate mix and rice straw) and a treatment diet (control diet + 0.5-1.0% NaB + 0.5-1.0% probiotics. The diets were fed for 22 months up to the time the animals were slaughtered. Dietary treatment increased (p<0.05) concentrations of trace minerals such as Zn, Cu, and Fe in the longissimus muscle compared to the control. The treatment diet did not affect cold carcass weight, yield traits such as backfat thickness, longissimus muscle area, yield index, yield grade and quality traits such as marbling score, meat color, fat color, texture, maturity and quality grade. Blood profiles of growing steers were within the normal ranges for healthy cattle. In conclusion, feeding a combination of clay mineral and probiotics to Hanwoo steers fed rice straw as a sole roughage source could have a desirable effect on improving trace mineral retention in longissimus muscle without any deleterious effects on carcass traits of steers.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3327-3332
• /
• 2010

We investigated the effects of newly synthesized 4-[(butylsulfinyl)methyl]-1,2-benzenediol (SMBD) on the prevention of atherosclerosis in hypercholesterolemic rabbits. SMBD exhibited stronger inhibition of $Cu^{2+}$-induced low-density lipoprotein oxidation than that of ascorbic acid or simvastatin. Three-month-old rabbits were fed an atherogenic diet containing 0.5% cholesterol and 10% coconut oil, while other two groups were given an atherogenic diet with intravenous injection of either simvastatin or SMBD (0.33 mg/kg/day) for 4 weeks. The concentrations of plasma cholesterol and thiobarbituric acid reactive substances were significantly decreased in SMBD groups, compared to the control group. Also, aortic lipid level in the SMBD group significantly lower than that in the control group. Furthermore, compared with the control group, the SMBD group significantly inhibited the increase of aortic intimal thickness by 36% via reducing of aortic reactive oxygen species and cyclooxygenase-2 protein levels. We conclude that raised antioxidant effect of SMBD results in significant prevention against hypercholesterolemia.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.23-33
• /
• 1999

A finite element method was employed fort thermal and stress analyses of an IGBT module of 3-phase full bridge. The effect of material parameters such as substrate material, substrate area, solder thickness on the temperature and stress distributions of the module packages has been investigated. Thermal analysis results have also been compared by setting of boundary conditions such as equivalent heat transfer coefficient or constant temperature at a base metal surface of the package. The increase of ceramic substrate area up to 3 times does little contribution to the reduction(8.9%) of thermal resistance, while contributed a lot to the reduction(60%) of thermal stress. Thicker solder resulted in higher thermal resistance but did slightly reduced thermal stresses. It is revealed by the stress analysis that maximum stress was induced at the region of copper pads which are bonded with ceramic substrate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2662-2670
• /
• 2009

The effect of the reflector type for the SAW filter on the characteristics of the slanted finger IDT filter have been studied by computer simulation. The IDT was evaporated by Aluminum-Copper alloy. The design condition was optimized by the phase shift of the SAWfilter for WCDMA. We have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness are $5,000{\AA}$, and the width and the space of reflector are $3.6{\mu}m$ and $2.0{\mu}m$, respectively. Frequency response of the fabricated SFIT filter has the property that the center frequency is about 190MHz and bandwidth at the 3dB is probably 8.2MHz. And we could obtain that the return loss is less then 16dB, the ripple characteristics is probably 4dB and the triple transit echo is less then 18dB after when we have matched impedance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.686-693
• /
• 2004

We have studied a method to fabricated a Surface Acoustic Waves (SAW) filter for Wide band Codeless Division Multiple Access(WCDMA) was formed on the Langasite substrate and was evaporated by Aluminum-Copper alloy and then we developed a simulator using the mathematica package. And, we can design and fabricate the Slanted finger Inter-digital Transducer (SFIT) for the purpose to decreased the ultimate rejections on side of the electrodes, and performed computer-simulation by simulator. Also, we have employed that the block weighted type Inter-digital Transduce(IDT) as input transduce of the filter and the withdrawal weighted type IDT as an output transducer of the filter in order to minimize effect of diffractions. We have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness and the width of reflector are $5000\AA$, and $1\lambda/4(\cong3.6{\mu}m)$, respectively. Also the width of IDT' finger and the space between IDT' finger and reflector are $1\lambda$/16 and 1\lambda$/8, respectively. Frequency response of the fabricated SAW bandpass filter has the property that center frequency is about 190MHz, bandwidth at the 3dB is probably 4MHz and out-band attenuation is -60dB approximately.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.59-70
• /
• 2010

A long-term field demonstration experiment on selected stabilization methods to reduce the heavy metal mobility in farmland soil contaminated by heavy metals was conducted. The field demonstration experiment was established on the contaminated farmland with wooden plates (thickness = 1 cm), of which the dimension were width = 200 cm, Length = 200 cm, height = 80 cm, filled with treated soil, which was mixed with lime stone and steel refining slag except on control plot. Soil samples in the plots were collected and analyzed during the experiment period (6 months) after the installation of the plots. The field demonstration experiment results showed that the application lime stone at the ratio of 5% was effective for immobilizing heavy metal components in contaminated farmland soil.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.367-375
• /
• 2011

This study was carried out to investigate the effects of the level of cracked whole barley on daily feed intake, daily body weight gain, carcass characteristics and meat composition of finishing Hanwoo steers (feeding from 24 months to 30 months of age). The dietary treatments were consisted of five types (C; normal concentrate as a basal diet, T1; 10% addition of cracked whole barley, T2; 20% addition of cracked whole barley, T3; 30% addition of cracked whole barley, T4; 40% addition of cracked whole barley). A total 30 Hanwoo steers (588.6${\pm}$11.8kg) were allocated to 5 feeding groups. The daily feed intake and daily body weight gain were high in the order of T2 > T3 >T4 > T1 > C. The back fat thickness and longissmus muscle area were highest in C and T1, respectively (P<0.05) than other treatments. The meat yield index decreased with increased back fat thickness. The marbling score and meat quality were highest in T1 (P<0.01, 0.05, respectively), but maturity, fat color and meat color were not significantly different among treatments. The crude fat was highest in T1 (17.59%), while in T4 (7.47%) it was lowest (P<0.05). The crude protein and crude ash were not significantly different among treatments. The energy value of cracked whole barley treatments (T1, T2, T3, T4) was higher than C (P<0.05). The contents of Ca, Cu, K, Mg, Mo, Na and Zn were higher in C than the other treatments (P<0.01), but Co was higher in T2 (P<0.01). The CIE $L^*$ value of whole cracked barley treatments (T1, T2, T3, T4) was higher than C, however there were not differences among the treatments. The CIE $a^*$ value was highest in T1(P<0.05) than others. The CIE $b^*$ value was highest in C and it was decreased with increased feeding of cracked whole barley. Based on the above results, T1 treatment compared to other treatments improved the carcass quality parameters like loin muscle area, marbling score, meat quality, and CIE $L^*$ value.