• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.370-375
• /
• 2016

In this paper, we investigated the electrical properties of crystalline silicon solar cell fabricated with Ni/Cu/Ag plating. The laser process was used to ablate silicon nitride layer as well as to form the selective emitter. Phosphoric acid layer was spin-coated to prevent damage caused by laser and formed selective emitter during laser process. As a result, the contact resistance was decreased by lower sheet resistance in electrode region. Low sheet resistance was obtained by increasing laser current, but efficiency and open circuit voltage were decreased by damage on the wafer surface. KOH treatment was used to remove the laser damage on the silicon surface prior to metalization of the front electrode by Ni/Cu/Ag plating. Ni and Cu were plated for each 4 minutes and 16 minutes and very thin layer of Ag with $1{\mu}m$ thickness was plated onto Ni/Cu electrode for 30 seconds to prevent oxidation of the electrode. The silicon solar cells with KOH treatment showed the 0.2% improved efficiency compared to those without treatment.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.589-598
• /
• 2021

The purpose of this study was to analyze the efficiency with which phosphorylated spent coffee grounds (PSCG) remove cationic Cu(II) ions from an aqueous solution. The pHpzc of the SCG was 6.43, but it was lowered to 3.96 in the PSCG, confirming that an acidic functional group was attached to the surface of the PSCG. According to FT-IR analysis, phosphorylation of the SCG added P=O, P-O-C (aromatic), P=OOH, and P-O-P groups to the surface of the adsorbent, and the peaks of the carboxyl and OH groups were high and broad. Also, the specific surface area, mesopore range, and ion exchange capacity increased significantly by phosphorylation. The adsorption kinetics and isothermal experiments showed that Cu(II) adsorption using SCG and PSCG was explained by PSO and Langmuir models. The maximum Langmuir adsorption capacity of SCG and PSCG was 42.23 and 162.36 mg/g, respectively. The adsorption process of both SCG and PSCG was close to physical adsorption and endothermic reaction in which the adsorption efficiency increased with temperature. PSCG was very effective in adsorbing Cu(II) in aqueous solution, which has great advantages in terms of recycling resources and adsorbing heavy metals using waste materials.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2176-2182
• /
• 2013

A novel sol-gel method was implied to prepare CuO-doped ZnO nanoparticles. XRD and SEM techniques were used to characterize the CuO-doped ZnO sample. The photocatalytic degradation of Lidocaine HCl was investigated by two methods. The degradation was studied under different conditions such as the amount of photocatalyst, pH of the system, initial concentration, presence of electron acceptor, and presence of anions. The results showed that they strongly affected the photocatalytic degradation of Lidocaine HCl. The photodegradation efficiency of drug increased with the increase of the irradiation time. After 6 h irradiation with 400-W mercury lamp, about 93% removal of Lidocaine HCl was achieved. The degree of photodegradation obtained by Taguchi method compatible with the trial-and-error method showed reliable results.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.201-210
• /
• 2012

Because sensing odor varies depending on each person, even if the odor is released in line with the legal emission permission concentration levels, it can still become a social issue if a civil complaint is made. The purpose of this research is to study the possibility of putting Mn-Cu metallic oxide catalysts into practical use to economically eliminate acetaldehyde which produces a odor in the industrial process. An optimal operating parameter to eliminate acetaldehyde was deduced through a performance evaluation in the research laboratory and the performance was verified by applying the parameter into an actual facility as an on-the-site experiment through a Scale-up of pilot size. The operating temperature of the metallic oxide catalysts researched so far was at the minimum close to $220^{\circ}C$, and the $220^{\circ}C$ elimination efficiency was 50% or below. However, having experimented by using a Mn-Cu metallic oxide catalyst in this research, optimum elimination efficiency showed when space velocity (GHSV) was equal to or below 6,000 $hr^{-1}$. The average elimination efficiency was 61.2% when the catalyst controlling temperature was $120^{\circ}C$, 93.3% when the catalyst controlling temperature was $160^{\circ}C$, and 94.9% when catalyst controlling temperature was $180^{\circ}C$, thereby reflecting high elimination efficiency. The specific surface area of the catalyst was $200m^2/g$ before use, however, was reduced to $47.162m^2/g$ after 24 months and therefore showed that despite the decrease in specific surface area as time passed, there was no significant influence on the performance. Having operated Mn-Cu metallic oxide catalyst systems for at least two years on a site where there was no inflow of toxins like sulfur compounds and acidic gases, we were able to confirm that elimination efficiency of at least 90% was maintained.

• Microbiology and Biotechnology Letters
• /
• v.36 no.2
• /
• pp.165-172
• /
• 2008

To find the optimum growth and metal removal condition of isolated strain LH2, effects of the environmental factors such as medium pH, growth temperature, and metal concentrations were investigated. Based on the 18S rDNA analysis, the isolated strain was identified to Exophiala sp. with 100% homology. Isolated strain Exophiala sp. LH2 showed maximum removal efficiency of metals at the shaking conditions of pH 7 and $25^{\circ}C$. When the concentration of metal was under 200ppm, the specific metal removal velocity at pH 7 increased from 0.01 to 4.43 mg-metal $L^{-1}{\cdot}d^{-1}{\cdot}mg{\cdot}DCW^{-1}$ as the concentration of metal increased from 10 ppm to 200 ppm. When 200 ppm of each metal was contained in the culture medium adjusted with pH 7, metal removal efficiencies Cr, Cu, Ni, Pb and Zn were 99.28%, 97.67%, 91.94%, 99.77%, 99.61%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.529-529
• /
• 2007

Ruthenium (Ru) is a white metal and belongs to platinum group which is very stable chemically and has a high work function. It has been widely studied to apply Ru as an electrode material in memory devices and a Cu diffusion barrier metal for Cu interconnection due to good electrical conductivity and adhesion property to Cu layer. To planarize deposited Ru layer, chemical mechanical planarization(CMP) was suggested. However, abrasive particle can induce particle contamination on the Ru layer surface during CMP process. In this study, zeta potentials of Ru and interaction force of alumina particles with Ru substrate were measured as a function of pH. The etch rate and oxidation behavior were measured as a function of chemical concentration of several organic acids and other acidic and alkaline chemicals. PRE (particle removal efficiency) was also evaluated in cleaning chemical.

• Carbon letters
• /
• v.8 no.3
• /
• pp.199-206
• /
• 2007

The activated carbon produced from rubber wood sawdust by chemical activation using phosphoric acid have been utilized as an adsorbent for the removal of Cu(II) from aqueous solution in the concentration range 5-40 mg/l. Adsorption experiments were carried out in a batch process and various experimental parameters such as effect of contact time, initial copper ion concentration, carbon dosage, and pH on percentage removal have been studied. Adsorption results obtained for activated carbon from rubber wood sawdust were compared with the results of commercial activated carbon (CAC). The adsorption on activated carbon samples increased with contact time and attained maximum value at 3 h for CAC and 4 h for PAC. The adsorption results show that the copper uptake increased with increasing pH, the optimum efficiency being attained at pH 6. The precipitation of copper hydroxide occurred when pH of the adsorbate solution was greater than 6. The equilibrium data were fitted using Langmuir and Freundlich adsorption isotherm equation. The kinetics of sorption of the copper ion has been analyzed by two kinetic models, namely, the pseudo first order and pseudo second order kinetic model. The adsorption constants and rate constants for the models have been determined. The process follows pseudo second order kinetics and the results indicated that the Langmuir model gave a better fit to the experimental data than the Freundlich model. It was concluded that activated carbon produced using phosphoric acid has higher adsorption capacity when compared to CAC.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.1
• /
• pp.74-83
• /
• 2020

In this study, the effect of hydrochloric acid (HCl) concentrations on removal efficiency and chemical forms of heavy metals in dredged sediment during acid washing was investigated. The removal efficiencies of Zn, Cu, Pb, Ni and Cd by acid washing were 18.4-92.4%, 7.2-83.7%, 9.4-75%, 8.1-53.4% and 34.4-70.8%, respectively. Overall, the removal efficiencies of heavy metals were remarkably enhanced with the increase of the acid strength. However, the removal efficiencies for 0.5 and 1.0 M HCl were comparable, and both cases met the Korean soil contamination standard. Based on the sequential extraction results, concentration of the exchangeable fraction (F1), the most labile fraction, increased whereas concentrations of the other fractions decreased with increasing acid strength. Particularly, the carbonate (F2) and Fe/Mn oxides (F3) fractions drastically decreased by using 0.5 M or 1.0 M HCl. The current study results verified that acid washing could effectively reduce heavy metal concentrations and its potential mobility in dredged sediments. However, the study also found that acid washing may cause significant increase in bioavailable fraction of heavy metals, suggesting the need to evaluate the changes in chemical forms of heavy metals by acid washing when determining the acid strength to be applied.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2255-2261
• /
• 2000

To eliminate $NO_x$ in diesel emission. selective catalyst reduction (SCR) was used in real diesel engine. Among the SCR methods, metal oxide and perovskite catalysts were introduced in this paper. The removal efficiencies with various major, promoter catalysts on ${\gamma}-Al_2O_3$ at different reaction temperature were investigated, and $LaCuMnO_x$ catalyst which has high removal efficiency at the temperature of real diesel exhaust gas was selected. $NO_x$ reduction was carried out over these catalysts in the flow-through type reactor using by-pass ($SV=3,300h^{-1}$). Under the given condition to this study, perovskite catalysts showed considerably high removal efficiency and $LaCuMnO_x$ was the best one among these catalysts in the temperature range of $150{\sim}450^{\circ}C$.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.75-81
• /
• 2007

This research was conducted to estimate the effect of sonication and reducing agent addition on soil washing of heavy metals-contaminated soil. Sonication trained in soil washing did not significantly increased extraction efficiency of heavy metal compared to soil washing only. The extraction efficiency of sonication trained in soil washing was 12% increased for Pb in 0.01M EDTA leaching solution. Pb and Cd showed higher extraction efficiency in case of reducing agent treatment with mechanical shaking than that with sonication. However, the extraction efficiency of Cu and Zn in case of reducing agent treatment with sonication was over 2 times higher than that in with soil washing. Therefore, application of reducing agent addition with sonication or mechanical shaking should be decided differently for pretreatment of soil washing, according to the kind of heavy metal. It was estimated that sonication after adding reducing agent could increase removal efficiency of Zn or Cu-contaminated soil and shorten the treatment time.