• Korean Journal of Microbiology
• /
• v.35 no.4
• /
• pp.315-321
• /
• 1999

This study has been performed to deveope a yeast strain having high ${\alpha}$-amylase production ability using nuclear transfer method. Hybrids formed between the strains of Saccharomyces fiburigera KCTC 7393 and Saccharomyces cerevisiae KCTC 7049 (tyr-, ura-)were obtained by nuclear transfer technique. Nuclei isolated from the wild type S. fiburigera strain were transfered into auxotrophic mutants S. cerevisiae and selected the hybrids showing an increased starch degrading capability were selected (MN-16). This transformant grew best and produced maximal ${\alpha}$-amylase activity on the medium containing 2% (V/V) soluble starch. ${\alpha}$-Amylase from MN-16 was purified electrophoretically homogenety and its properties were investigated. The enzyme was purified about 10.6 fold with an overall yield 9.7% from the culture medium by ammonium sulfate fractionation. DEAE-Sephacel column chromatography, and Sephacryl S-200 column chromatography. The purified enzyme showed a single band on SDS-polyacrylamide gel electrophoresis. The molecular weight of the ${\alpha}$-amylase was estimated to be 53,000 daltons by SDS-PAGE and by gel permeation chromatography on Sephacryl S-200. The purified enzyme showed the maximum activity at pH 5.5 and 40${\circ}C$. The km value for soluble starch was 2.5㎎/㎖. The enzyme activity increased in the presence of $Ca^{2+}, Co^{2+}, EDTA, Mg^{2+}, Mn^{2+}, Zn^{2+}$, but inhibited by $Cu^{2+}, Fe^{2+}$, and $Ni^{2+}$

• KSBB Journal
• /
• v.29 no.3
• /
• pp.131-138
• /
• 2014

In this study, we isolated two novel chitinase producing bacterial strains from yellow loess samples collected from Jullanamdo province. The chitinase producing bacteria were isolated based on the zone size of clearance in the chitin agar plates. Both of them were gram positive, rod ($2{\sim}3{\times}0.3{\sim}0.4{\mu}m$), spore-forming, and motility positive. They were facultative anaerobic, catalase positive and hydrolyzed starch, gelatin, and casein. From the 16s rRNA gene sequence analysis, the isolates were labeled as Bacillus licheniformis KYLS-CU01 and B. licheniformis KYLS-CU02. The isolates showed higher extracellular chitinase activities than B. licheniformis ATCC 14580 as a control. The optimum temperature and pH for chitinase production were $40^{\circ}C$ and pH 7.0, respectively. Response Surface Methodology (RSM) was used to optimize the culture medium for efficient production of the chitinase. Under this optimal condition, 1.5 times higher chitinase activity of B. licheniformis KYLS-CU02 was obtained. Extracellular chitinases of the two isolates were purified through ammonium sulfate precipitation and anion-exchange DEAE-cellulose column chromatography. The specific activities of purified chitinase from B. licheniformis KYLS-CU01 and B. licheniformis KYLS-CU02 were 7.65 and 5.21 U/mg protein, respectively. The molecular weights of the two purified chitinases were 59 kDa. Further, the purified chitinase of B. licheniformis KYLS-CU01 showed high antifungal activity against Fusarium sp.. In conclusion, these two bacterial isolates can be used as a biopesticide to control pathogenic fungi.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.265-274
• /
• 1999

The microstructure of Cu thin films in various deposition conditions was characterized. Cr films (50 nm thick) and Cu films (500 or 1000 nm thick) were deposited on polyimide films by DC magnetron sputtering. The Ar pressure during Cu deposition was controlled to 5, 50 and 100 mtorr. The microstructure was characterized using conventional and high resolution SEM and TEM. As sputtering pressure increases, open boundaries are observed more frequently. The Cu film deposited at 5 mtorr has a dense and uniform structure, while low-density regions or open boundaries between columns exist in the film deposited at higher pressure. As the film grows thicker, open boundaries are wider and the density of open boundaries are higher. The comparison between SEM and TEM show that the small features shown in high resolution SEM are grains. High resolution SEM is very effective to characterize the microstructure of the thin films. One column in the films deposited at 50 and 100 mtorr consists of several grains, which are smaller than those deposited at 5 mtorr.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.541-548
• /
• 2009

Iron coated media (activated carbon, sand and starfish) were prepared at pH 4 and applied for the treatment of landfill leachate containing organic compounds and soluble metal ions such as $Zn^{2+},\;Cu^{2+},\;Mn^{2+}$ in batch and column experiment. The amount of iron coated in media was analyzed with EPA 3050B method. The removal efficiency of metal ions and phenol was compared with iron coated media. The amount of iron coated in Fe-AC and ICS(iron coated sand) were 1,612 mg/kg and 1,609 mg/kg, respectively, while it was higher with 1,768 mg/kg in ICSF(iron coated starfish). The result of batch study represent the highest removal efficiency in the treatment of wastewater using iron coated starfish. In column study, the removal efficiency of phenol and metal ions was higher in multi-layered system of ICS, Fe-AC and ICSF compared to single layered system. Breakthrough time in the effluent was relatively enhanced for $Cu^{2+}$ and $Zn^{2+}$ in multi-layered system while the removal efficiency of $Mn^{2+}$ were not varied much. Therefore, multi-layered system was identified as the better system for the treatment of wastewater containing of metal ions and organic compound.

• YAKHAK HOEJI
• /
• v.29 no.3
• /
• pp.144-151
• /
• 1985

Cathodic stripping voltammetric determination of traces of selenium in plant samples was studied. Stripping peak of selenium (IV) from Cu-Se intermettalic deposit in acidic media containing copper (II) ion is specific, highly sensitive and well defined, is successfully used for the quantitative determination of selenuin down to the level of 1ng/ml. Sample is burnt in a calorimeter bomb under the oxygen pressure of 40atm. and the selenium is absorbed in 0.1M NaOH. After the solution is filtrated, concentrated and acidified with HCl, then passed through a column of cation exchange resin in the $H^{+}$ form(Dowex 50X-8). The column eluate is analyzed for selenium by differential pulse cathodic stripping voltammetric method. Analytical results of selenium for NBS SMR is well agreement with the certified values. Results are given for a series of plant materials.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1067-1072
• /
• 2002

A new polystyrene-divinylbenzene resin containing 2-(2-thiazolylazo)-5-dimethylamino-phenol (TAM) functional groups has been synthesized and its sorption behavior for nineteen metal ions, including Zr(Ⅳ),Hf(Ⅳ) and U(Ⅵ) has been investigated by batch and column methods. The chelating resin showed high sorption affinity for Zr(Ⅳ) at pH 1-5 and U(Ⅵ) at pH 4. Some parameters affecting the sorption of the metal ions have been detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(Ⅳ), Th(Ⅳ) and U(Ⅵ), which showed higher than the other metal ions, were 0.90,0.84 and 0.80 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as Zr(Ⅳ) > Th(Ⅳ) > U(Ⅵ) > Cu(Ⅱ) > Hf(Ⅳ) > W(Ⅵ) > Mo(Ⅵ) > In(Ⅲ) > Sn(Ⅳ) > Cr(Ⅲ) > V(Ⅴ) > Fe(Ⅲ). Quantitative recovery of most metal ions except Zr(Ⅳ) was achieved using 2M HNO3. Desorption and recovery of Zr(Ⅳ) was successfully performed with 2 M HClO4 and 2 M HCl.

• Journal of Environmental Science International
• /
• v.18 no.2
• /
• pp.239-244
• /
• 2009

In this study, to stabilize the heavy metal in the contaminated soils, the column leaching test based on rainfall and pH value was performed by using coal mine drainage sludge(CMDS): which was generated during electrical purification of abandoned coal mine wastewater. Four types of testing column were used in this study. That were the CMDS and the heavy metal contaminated soils well mixed in 0 wt%, 1 wt%, 3 wt% and 3 wt% layered column. According to the investigation, when the influent pH was $5.5{\sim}6.2$, there were no heavy metal elution at all conditions, and when the influent pH was $3{\sim}3.3$, the order of Cu, Zn, Pb, Cr elution concentration was 3 wt% M(mixed)<3 wt% S(separation)<1 wt% M<0 wt% and the average elution concentration was quite low, the value was 0.005 mg/L. Therefore, CMDS can used as new stabilizer of the heavy metal in the contaminated soils.

• Steel and Composite Structures
• /
• v.19 no.5
• /
• pp.1299-1319
• /
• 2015

This paper presents a detailed parametric study, conducted using finite element tools to cover a range of several geometric and material parameters, on the behaviour of thin-walled partially encased composite (PEC) columns. The PEC columns studied herein are composed of thin-walled built-up H-shaped steel sections with concrete infill cast between the flanges. Transverse links are provided between the opposing flanges to improve resistance to local buckling. The parametric study is confined to eccentrically-loaded columns subjected to major axis bending only. The parameters that were varied include the overall column slenderness ratio (L/d), load eccentricity ratio (e/d), link spacing-to-depth ratio (s/d), flange plate slenderness ratio (b/t) and concrete compressive strength ($f_{cu}$). The overall column slenderness ratio was chosen to be the primary variable with values of 5, 10 and 15. Other parameters were varied within each case of L/d ratio. The effects of the selected parameters on the behaviour of PEC columns were studied with respect to the failure mode, peak axial load, axial load versus average axial strain response, axial load versus lateral displacement response, moment versus lateral displacement behaviour and the axial load-moment interaction diagram. The results of the parametric study are presented in the paper and the influences of each of the parameters investigated are discussed.

• Journal of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.45-48
• /
• 1971

The various eluents have been used for the separations of alkaline earth metals by elutions through cation exchange resin column by many investigators. We find, the mixed solution of 1M HAc and 1M NaAc (pH 4.75) is the best eluent for this purpose, becouse the one step elution through 7cm Dowex 50w${\times}$8(100~200mesh) resin column with this eluent, gives the quantitative separation. When 2M NaAc is used as a eluent Sr(II) and Ba(II) is separated easily without any contamination of Mg(II) andCa(II). The Ca-Pb alloy which is composed of Cu, Ca, Sr, Ba and abundance of Pb metal is separated quantitatively into its components by the two step elution with 0.3M HAc + 0.3M NaAc(PH 4.75) and 0.5M HAc + 0.5M NaAc(PH 4.75) as eluents through 10cm resin column.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.366-369
• /
• 1971

The cation exchange chromatographic method for the analysis of Babbitt metal has been studied. The quantitative separation of the mixture of Sb, Cu, Pb, and Sn ions has been obtained by elution, through 5cm column of resin, Rexyn 101 (Na form, 100~200 mesh), using 0.1 M NaCl solution for Sb, pH 4.5 and pH 7 solution of 0.01 M Na-Citrate + 0.1 M $NaNO_3$ for Cu and Pb, and 2NHCl solution for Sn as eluent.