• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.53-56
• /
• 2015

초임계 암모니아 분위기와 CuI 촉매 하에서 p-Diiodobenzene(PDIB)를 아민화 반응시켜 p-Phenylenediamine(PPD)를 합성하는 방법을 연구하였다. 본 연구에서는 여러 가지 공정변수들이 PPD 생성 수율에 미치는 영향을 알아보기 위하여 반응 온도, 암모니아 초기 주입 양에 따른 반응 압력, 촉매의 유무 및 촉매 주입량, 반응 시간 등을 변화시키면서 이에 따른 PPD 수율 변화를 GC 분석을 통하여 조사하였다. 그 결과, 무촉매 반응 시에는 PPD가 전혀 생성되지 않음을 알 수 있었으며, 반응온도, 반응 압력, 촉매 주입량 및 반응시간이 증가함에 따라 PPD 생성 수율이 증가하는 것을 확인할 수 있었다 단, 반응온도의 경우 $250^{\circ}C$ 이상에서는 열분해에 의해 PPD가 감소하여 $200^{\circ}C$가 최적의 온도임을 알 수 있었다. 또한, FT-IR과 $^1H$-NMR 분석을 통하여 아민기의 결합 특성과 PPD의 구조를 확인하였다.

• 분석과학
• /
• 제15권3호
• /
• pp.256-262
• /
• 2002

평균입자크기가 200 ${\mu}m$인 코디어라이트 분말을 사용하여 다공성 필터를 제조한 후, 진공함침법으로 $V_2O_5$, CuO, $LaCoO_3$ 촉매를 담지시킨 후 NO와 $SO_2$ 기체를 촉매 담지 세라믹필터에 동시 통과시키면서 NOx/SOx의 동시제거효율을 측정하였다. 제조된 다공성 필터의 기공률은 61.6%였고, 압축강도는 12.3 MPa이었으며, 면속도 5 cm/sec에서의 차압은 147 Pa이었다. NO와 $SO_2$의 동시제거효율을 분석해 본 결과, 페로브스카이트계 $LaCoO_3$ 촉매의 동시제거효율이 가장 우수함을 확인하였으며, $LaCoO_3$ 촉매의 NO에 대한 제거효율은 90% 이상, $SO_2$에 대해서는 80% 이상이었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1241-1246
• /
• 2010

Ternary Cu/ZnO/$Al_2O_3$ catalysts were prepared by a co-precipitation method. The precursor structures were monitored during the aging. The first precipitate structure was amorphous georgeite, which transformed into the unknown crystalline structure. The transition crystalline structure was assigned to the crystalline georgeite, which was suggested with elemental analysis, IR and XRD. The final structure of precursors was malachite. The Cu surface area of the resulting Cu/ZnO/$Al_2O_3$ was maximized to be 30.6 $m^2$/g at the aging time of 36 h. The further aging rapidly decreased Cu surface areas of Cu/ZnO/$Al_2O_3$. ZnO characteristic peaks in oxide samples almost disappeared after 24 h aging, indicating that ZnO was dispersed in around bulk CuO. TOF of the prepared catalysts of the Cu surface area ranges from 13.0 to 30.6 $m^2/g_{cat}$ was to be 2.67 ${\pm}$ 0.27 mmol/$m^2$.h in methanol synthesis at the condition of $250^{\circ}C$, 50 atm and 12,000 mL/$g_{cat}$. h irrespective of the XRD and TPR patterns of CuO and ZnO structure in CuO/ZnO/$Al_2O_3$. The pH of the precipitate solution during the aging time can be maintained at 7 by $CO_2$ bubbling into the precipitate solution. Then, the decrease of Cu surface area by a long aging time can be prevented and minimize the aging time to get the highest Cu surface area.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.193-199
• /
• 2006

${\gamma}-Al_2O_3$에 담지한 Cu-Mn 산화물 촉매에서 톨루엔 완전산화 반응을 $160{\sim}280^{\circ}C$의 온도 범위에서 고정층 반응기로 조사하였다. BET, SEM, TPR, TPO, XPS 및 XRD를 이용하여 촉매 특성분석을 하였다. 톨루엔의 완전산화 반응은 $280^{\circ}C$ 이하에서 이루어졌으며, 적절한 Cu-Mn 담지량은 15.0 wt％Cu-10.0 wt％Mn인 것으로 나타났다. TPR/TPO 및 XPS 분석 결과, 15 Cu-10 Mn 촉매의 산화환원 봉우리가 낮은 온도로 이동하였으며 결합에너지가 높은 값으로 이동하였다. XRD 결과, 고분산된 Mn 산화물과 CuO 보다 $Cu_{1.5}Mn_{1.5}O_4$의 촉매활성 인자로서의 역할이 더욱 우수한 것으로 추측되며, 촉매의 활성은 촉매의 산화환원 능력과 촉매의 높은 산화 상태에 기인하는 것으로 사료된다.

• 한국표면공학회지
• /
• 제34권6호
• /
• pp.545-552
• /
• 2001

Effect of ultrasonic agitation on Pd catalyst treatment was studied in metallization of ceramic boards by Cu electroless plating method.96% $Al_{2}$$O_{3}$ ceramic boards were used as substrate. In this study, the ultrasonic frequency of 28kHz was applied. In Pd catalyst, high density Pd nuclei of small size were formed during ultrasonic agitation. Density of Pd was more improved when using of ultrasonic then no stirring. In electroless plating, plating rate was in the range of 0.6~1.8$\mu\textrm{m}$/hr, which value increased with Rochelle Salts addition. Adhesion strength between ceramic boards and Cu layer was improved of 20% when using ultrasonic agitation at $30^{\circ}C$ ,5min.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.273-278
• /
• 1998

$De-NO_x$ transition metals(Cu, Co)/ZSM-5 catalyst was made by mechanical alloying method, and their microstructures and repeated usage-properties were investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The conversions ability of NO in the catalyst was measured. A part of ZSM-5 in CO/ZSM-5 composite powders was amorphous and the amorphous phase became less stable with increasing Co content. Conversion ability of NO in 10Cu/ZSM-5 powders decreased from 89% to 12% and that in 10Co/ZSM-5 decreased from 22% to 17% by 7 times conversion tests.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.1033-1037
• /
• 2008

A copper cyclam-type complex was successfully immobilized onto mesoporous silica SBA-16. Characterization by NIR spectroscopy and TGA analysis confirmed that copper cyclam complex is immobilized onto mesoporous SBA-16. The Cu(II)-Cyclam-SBA-16 was proven to be a good catalyst for oxidation reaction of cyclohexene with conversion up to 77.8% after 13 h reaction and providing a high selectivity to cyclohexenol and 3-hydroperoxycyclohex-1-ene. The results suggest that the copper species play a major role as catalyst via reversible redox cycles as proven by cyclic voltammetry analysis.

• 한국표면공학회지
• /
• 제54권1호
• /
• pp.1-11
• /
• 2021

Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5610-5614
• /
• 2012

암모니아를 환원제로 사용하는 선택적촉매환원법(Selective Catalytic Reduction, SCR)에서 촉매의 다양한 공정조건에서의 질소산화물 전환특성을 조사하였다. $H_2$-TPR을 통해 Mn, Cu가 포함된 탈질촉매의 경우 저온에서의 산소사용능력으로 우수함을 확인할 수 있었다. 탈질촉매 #1의 경우 반응온도가 증가함에 따라 탈질효율이 감소하나 탈질촉매 #2의 경우 반응온도가 증가함에 따라 탈질효율이 증가하다가 일정하였다. 이러한 현상은 두 촉매의 $NH_3$ 산화능력의 차이에 의한 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.451-454
• /
• 2006

WGS reaction over Mo2C and ceria based catalysts was investigated to develop an alternative commercial Cu-Zn/Al2O3 catalyst for fuel processor and hydrogen station. The Mo2C catalysts were prepared by a temperature programmed method and the various metal supported cerium oxide catalysts were prepared by an Impregnation method. The catalysts were characterized by the N2 physisorption, Co chemisorption, XRD, TEM and TPR. It was found that Mo2C and 0.2wt% Pt-40wt%, Ni/CeO2 catalysts had higher activity and stability than the Cu-Zn/Al203 above $260^{\circ}C$. Moreover, CO conversion of more than 85% was observed at $280{\sim}300^{\circ}C$. But all catalysts were deactivated during the thermal cycling runs. The results suggest that these catalysts are an attractive candidate for the alternative Cu-Zn/Al2O3 catalyst for fuel processor and hydrogen station applications.