• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.98-105
• /
• 2003

In the experimental study, wire EDM was conducted for cold die steel by changing the Wire electrode, peak discharge current and number of finish cut. From the micro structure analysis of SEM photographs, the size of irregular welded and added component on the EDMed surface is decreasing and size of EDMed plane surface is increasing as the decreasing peak current and increasing number of finish cut. From the analysis of coating effect, Zn component is highly contained in Br and Zn Wire EDMed surface and copper component is highly contained in Br and Al wire EDMed surface. Hardness values are Increasing as the increasing peak current and decreasing the number of finish cut The value of hardness is decreasing as Cu, Al, Zn and Br wire electrode because of the residual austenite effect of solid solution copper on solidification, and finally EDMed surface has the highest hardness values for every wire electrode. Yield strength values becomes larger and bending strength values become smaller due to the increasing the hardness. These results are increased as increasing brittleness with hardness.

• 대한화학회지
• /
• 제23권6호
• /
• pp.385-391
• /
• 1979

CuS-$Ag_2S$ 분말에 PVC 분말을 4 : 1 의 비율로 섞어서 눌러 만든 구리이온 선택성전극은 재현성이 좋으며 견고하고 오래 사용할 수 있는 전극임을 알았다. 이 전극을 이용하여 구리이온에 대한 감응전위를 측정한 결과 Cu(Ⅱ)용액의 농도 1.0 ${\times}$$10^{-1}M$부터 1.0 ${\times}$ $10^{-5}M$사이의 범위에서 직선관계를 나타내었고 기울기는 $298^{\circ}K$에서 Nernst의 법치긍로부터 약간 벗어난 25.0mV이었다. 이 전극을 지시전극으로 사용하여 시료용액 1.0 ${\times}$ $10^{-2} M Cu(NO_3)_2$를 0.1M NaOH 표준용액으로 침전법 적정을 할 수 있었다. 또한 이 지시전극으로 Zn(II), Mg(II), Ca(II), 등의 이온을 pH 10에서 EDTA로 적정할 수 있었고 이미 알려진 Cu-$EDTA^{2-}$이 안정도상수($-pK_{Cu-EDTA^{2-}}$=18.80)를 이용하여 칼슘 및 마그네슘의 EDTA착물의 안정도 상수 ($-pK_{Ca-EDTA^{2-}}$=10.30, $-pK_{Mg-EDTA^{2-}}$=8.00)를 결정할 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.1-4
• /
• 2006

White-light-emitting ZnS:Mn, Cu, Cl phosphors with spherical shape and the size of $20\;{\mu}m$ are successfully synthesized. They have the double phases of cubic and hexagonal structures. They are applied to electroluminescent (EL) devices by silk screen method with the following structure: $electrode/BaTiO_3$ insulator layer ($50{\sim}60\;{\mu}m$)/ ZnS:Mn, Cu, Cl phosphor layer ($30{\sim}50\;{\mu}m$)/ITO glass. The EL devices are driven with the voltage of 100 V and the frequency of 400 Hz. The EL devices show the three emission peaks. The blue and green emission bands are originated from $CICu^{2+}$ transition and $ClCu^+$ transition, respectively. The yellow emission band results from $^4T^6A$ transition of $Mn^{2+}$ ion. As an increase of Cu concentrations, the blue and green emission intensities decrease whereas the yellow emission intensity increases; the quality becomes warm white. It is due to the energy transfer from the blue and green bands to the yellow band.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.56-66
• /
• 1995

Recently, with theraped advancement in th oceanology such an ocean-going vessel and oceanic structures, there is a need to study the cavitation erosion-corrosion control of pump impeller, the partial element of ocean machinery, for more effective operation. Especially, the cathodic protection (impressed current method & Al-sacrificial anode method) was applied to sea water, and Cu-alloy material mixed Zn & Al was used as a control method of cavitation erosion-corrosion. In this study, used the piezoelectric vibrator with 20KHz, 24.mu.m to cavity generation apparatus, and investigated the weight loss, weight loss rate, electrode potential & current density etc. under this condition. According to test result, thos describes how to indentify an influence of the cathodic protection and Al & Zn addition in material development for the control of cavitation erosion-corrosion, and those will serve as fundamental data on the cavitation erosion-corrosion control of oceanic centrifugal pump.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.285-291
• /
• 2020

Recent advances in technology using ultra-thin noble metal film in oxide/metal/oxide structures have attracted attention because this material is a promising alternative to meet the needs of transparent conduction electrodes (TCE). AZO/Ag/AZO multilayer films are prepared by magnetron sputtering for Cu₂ZnSn(S,Se)₄ (CZTSSe) of kesterite solar cells. It is shown that the electrical and optical properties of the AZO/Ag/AZO multilayer films can be improved by the very low resistivity and surface plasmon effects due to the deposition of different thicknesses of Ag layer between oxide layers fixed at AZO 30 nm. The AZO/Ag/AZO multilayer films of Ag 15 nm show high mobility of 26.4 ㎠/Vs and low resistivity and sheet resistance of 3.58^⁎10^-5 Ωcm and 5.0 Ω/sq. Also, the AZO/Ag (15 nm)/AZO multilayer film shows relatively high transmittance of more than 65 % in the visible region. Through this, we fabricated CZTSSe thin film solar cells with 7.51 % efficiency by improving the short-circuit current density and fill factor to 27.7 mV/㎠ and 62 %, respectively.

• 대한화학회지
• /
• 제37권8호
• /
• pp.723-729
• /
• 1993

탄소분말과 Nujol oil의 carbon paste 혼합물에 1-(2-pyridylazo)-2-naphthol (PAN)을 섞어서 Cu(Ⅱ)이온에 감응하는 수식전극을 제작하였다. Cu(II) 이온이 포함된 완충용액에 전극을 담구어 전위를 가하지 않고 PAN-수식전극의 표면에 Cu(II) 이온을 석출시킨 후, 전해액으로 옮겨 일정시간 동안 일정 전위에서 환원시켰다. 그런 다음 양의 방향으로 전위를 주사함으로써 좋은 전압전류파를 얻을 수 있었다. 전극표면을 산용액에 담금으로써 재생시킬 수 있었다. 전극의 재현성은 석출/측정/재생의 순으로 5회 반복실험하여 조사한 결과 상대표준편차는 6.1${\%}$였다. 시차펄스 전압전류법으로 조사한 경우 2.0 ${times}$ 10$^{-7}$M에서 1.0 ${times}$ 10$^{-6}$ M의 농도 범위에 걸쳐 직선성이 성립했으며, 검출한계는 6.0 ${times}$ 10$^{-8}$ M이었다. Cu(II) 이온을 정량하는데 있어서 EDTA와 oxalate 이온을 제외한 다른 공존이온의 영향을 별로 받지 않았다.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.1013-1016
• /
• 2008

본 연구에서는 폐수 내 존재하는 질산성 질소를 제거하기 위해 캐소드물질로 철(Fe), 구리(Cu), 니켈(Ni), 아연(Zn)을 선택하여 전기화학적 환원반응 특성을 조사하였다. $NO_3^-$로부터 $NH_3$로의 변환반응에 있어서 Zn이 가장 우수한 촉매 특성을 가지고있으며, pH 8.5에서 가장 높은 질산성 질소 제거 효율을 나타내었다. 전극표면에서 질산성 질소는 아질산성 질소로 환원된 후, 암모니아성 질소로 전환되는 것을 확인하였으며 암모니아성 질소는 HOCl과의 화학반응을 통하여 질소 형태로 완전히 제거할 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.84-88
• /
• 2007

[ $Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7$ ] (BZN), $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMN), and $Bi_2Cu_{2/3}Nb_{4/3}O_7$ (BCN) pyrochlore thin films were prepared on $Cu/Ti/SiO_2/Si$ substrates by pulsed laser deposition and the micro-structural and electrical properties were characterized for embedded capacitor applications. The BZN, BMN, and BCN films deposited at $25\;^{\circ}C$ and $150\;^{\circ}C$, respectively show smooth surface morphologies and dielectric constants of about $39\;{\sim}\;58$. The high dielectric loss of the films deposited at $150\;^{\circ}C$ compared with films deposited at $25\;^{\circ}C$ was attributed to the defects existing at interface between the films and copper electrode by an oxidation of copper bottom electrode. The leakage current densities and breakdown voltages in 200 nm thick-BMN and BZN films deposited at $150\;^{\circ}C$ are approximately $2.5\;{\times}\;10^{-8}\;A/cm^2$ at 3 V and above 10 V, respectively. Both BZN and BMN films are considered to be suitable materials for embedded capacitor applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.431-431
• /
• 2016

Typical Cu(In,Ga)Se2 (CIGS)-based solar cells have a buffer layer between CIGS absorber layer and transparent ZnO front electrode, which plays an important role in improving the cell performance. Among various buffer materials, chemical bath deposition (CBD)-ZnS is being steadily studied to alternative to conventional CdS and the efficiency of CBD-ZnS/CIGS solar cell shows the comparable values with that of CdS/CIGS solar cell. The intriguing thing is that reversible changes occur after exposure to illumination due to the metastable defect states in completed ZnS/CIGS solar cell, which induces an improvement of solar cell performance. Thus, it implies that the understanding of metastable defects in CBD-ZnS/CIGS solar cell is important issue. In this study, we fabricate the ITO/i-ZnO/CBD-ZnS/CIGS/Mo/SLG solar cells by controlling the NH4OH mole concentration (from 2 M to 3.5 M) of CBD-ZnS buffer layer and observe their conversion efficiency with and without light soaking for 1 hr. From the results, NH4OH mole concentration and light exposure can significantly affect the CBD-ZnS/CIGS solar cell performance. In order to investigate that which layer can contain metastable defect states to influence on solar cell performance, impedance spectroscopy and capacitance profiling technique with exposure to illumination have been applied to CBD-ZnS/CIGS solar cell. These techniques give a very useful information on the density of states within the bandgap of CIGS, free carriers density, and light-induced metastable effects. Here, we present the rearranged charge distribution after exposure to illumination and suggest the origin of the metastable defect states in CBD-ZnS/CIGS solar cell.