• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.1
• /
• pp.114-119
• /
• 2016

The necessity of IoT(Internet of Things) and Multimedia CSCW is described, and error control for multimedia CSCW(Computer Supported Cooperated Works) based on CoAP stack is suggested. This paper describes an error synchronization running on gateway software stack based CoAP. This system consists of an CS_EDA, and CS_ESA. CS_EDA is an agent that detects an error for multimedia distance system based on gateway software stack based CoAP environment. CS_ESA is an agent that is an error synchronization system for multimedia distance control based on gateway software stack based CoAP environment. From the perspective of multimedia collaborative environment of gateway software stack based CoAP, an error application becomes another interactive presentation error is synchronized with participants engaged in a cooperative work.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.240-240
• /
• 1996

Staphylococcus aureus, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis 및 Pseudomonas aeruginosa에 의한 mouse 복강내감염증에 대하여 DA-1131은 IPM/CS와 MEPM/CS에 비하여 현저히 우수한 치료효과를 나타내었다. 백혈구감소 mouse에서의 P. aeruginosa에 의한 복강내감염증에 대하여도 DA-1131은 IPM/CS와 MEPM 및 MEPM/CS보다 동등 이상의 우수한 치료효과를 나타내었다. K. pneumoniae를 감염균으로 한 mouse 호흡기감염 후 생존율 평가 시험에서 DA-1131 투여 mouse는 IPM/CS 및 MEPM/CS에 비하여 현저히 우수한 생존율을 나타내었고, 동시에 MEPM/CS와 유사한 폐내 생균수의 감소 pattern이 확인되었으며, IPM/CS에 비하여 균의 재증식을 억제하는 효과가 우수하였다. P. mirabilis에 의한 mouse 요로감염증에서는 DA-1131 투여군의 신장내 생균수감소는 MEPM/CS와 동등한 수준인 것으로 나타났으나 IPM/CS에 비하여는 매우 우수하였다.

• Journal of the Korean Magnetic Resonance Society
• /
• v.26 no.1
• /
• pp.10-16
• /
• 2022

The phase transition temperatures of CsCoCl₃·2H₂O crystals are investigated via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Three endothermic peaks at temperatures of 370 K (=T_C1), 390 K (=T_C2), and 416 K (=T_C3) were observed for phase transitions from CsCoCl₃·2H₂O to CsCoCl₃·1.5H₂O, to CsCoCl₃·H₂O, and then to CsCoCl₃·0.5H₂O, respectively. In addition, the spin-lattice relaxation time T_1ρ in the rotating frame and T₁ in the laboratory frame as well as changes in chemical shifts for ¹H and ¹³³Cs near T_C1 were found to be temperature dependent. Our analyses results indicated that the changes of chemical shifts, T_1ρ, and T₁ are associated with structural phase transitions near temperature T_C1. The changes of chemical shifts, T_1ρ, and T₁ near T_C1 were associated with structural phase transitions, owing to the changes in the symmetry of the structure formed of H₂O and Cs⁺ ions. Consequently, the structural symmetry in CsCoCl₃·2H₂O crystals based on temperature is discussed by the environments of their H and Cs nuclei.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1438-1439
• /
• 2011

In this paper, we studied effects on the efficiency, according to thickness of the electron injection layer(EIL) for improving efficiency of Organic Light Emitting Diodes(OLEDs). For the first time, after confirming the optimum thickness of the EIL material $Cs_2CO_3$, we designed OLED devices having a structure of ITO/TPD/$Alq_3/Cs_2CO_3$/Al. And we manufactured devices applying for the optimum thickness of the material in the simulation with thermal evaporating method. And we investigated how the EIL material $Cs_2CO_3$ effects on efficiency of OLEDs in the EIL. As the result, because the EIL material $Cs_2CO_3$ reduces energy potential barrier of the EIL, it facilitated the electron transfer. And, as blocking the hole transfer contributes to an increased recombination, we confirmed that the efficiency of OLEDs increased. And compared to the device without using the EIL material, the device using thickness 1.0 nm of $Cs_2CO_3$ in the EIL shows the excellent efficiency. Therefore, we confirmed that the luminance and the external quantum efficiency increase about 600% and 500% respectively.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.161-172
• /
• 2024

For sustainable development, better performance, and less gas pollution during rumen fermentation, there is a need to find a green and safe feed additive for ruminants. Cysteamine (CS) is a biological compound naturally produced in mammalian cells. It is widely used as a growth promoter in ruminants because of its ability to control hormone secretions. It mainly controls the circulating concentration of somatostatin and enhances growth hormone production, leading to improved growth performance. CS modulates the rumen fermentation process in a way beneficial for the animals and environment, leading to less methane production and nutrients loss. Another beneficial effect of using CS is that it improves the availability of nutrients to the animals and enhances their absorption. CS also works as an antioxidant and protects the cells from oxidative damage. In addition, CS has no adverse effects on bacterial and fungal alpha diversity in ruminants. Dietary supplementation of CS enhances the population of beneficial microorganisms. Still, no data is available on the use of CS on reproductive performance in ruminants, so there is a need to evaluate the effects of using CS in breeding animals for an extended period. In this review, the action mode of CS was updated according to recently published data to highlight the beneficial effects of using CS in ruminants.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.507-515
• /
• 1994

Fly ash and betonite samples were selected and characteristics of them were investigated. Fly ash was found to be similar to bentonite in particle size distribution but quite different in microstructure. The most special aspect of fly ash was high alkalinity of its solution. Distribution coefficients of Cs and Co on the samples were measured to survey the effects of mixing. Fly ash showed higher distribution coefficient of Co than that of Cs. Through various experiments, factors affecting the distribution coefficients of Co and Cs on mixture of bentonite and fly ash were identified. Comparison of the distribution coefficients of Cs on fly ash and bentonite mixture with those on sand and bentonite mixture suggests that fly ash would be useful as an efficient additive of backfill material if pertinent mixing ratio was chosen.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.238-238
• /
• 1996

각종 동물 및 인체 신장 유래 DHP-I에 의한 DA-1131, imipenem(IPM) 및 meropenem(MEPM)의 속도 상수를 측정한 결과, DA-1131은 동물종에 관계없이 가장 안정성이 큰 결과를 나타내었고, 인체 DHP-I에 대한 Vmax/Km 값이 IPM의 21.9%로 관찰되어 IPM보다 하위 기질인 것으로 확인되었다. DA-1131, IPM/CS 및 MEPM/CS의 20mg/kg투여 후의 혈중농도 반감기(T$_{1}$2/)는 각각 11.4분, 8.9분, 10.3분이었으며, 1$\mu\textrm{g}$/$m\ell$ 이상의 혈중농도룰 유지하는 시간은 66.6 분, 55.9 분, 63.1 분이었다. DA-1131, DA-l131/CS, IPM/CS, MEPM 및 MEPM/CS의 40 mg/kg 투여 후 24시간 동안의 뇨중 배설율은 57.9 %, 61.3%, 22.6 %, 11.3% 및 65.9%이었으며, 각 약물을 40 mg/kg 투여 15분 후 DA-ll3l의 폐중 농도는 11.2$\mu\textrm{g}$/g으로 DA-l131/CS, IPM/CS 및 MEPM/CS와 비슷한 결과를 나타내었으며 T/P ratio도 DA-1131, DA-l131/CS, IPM/CS 와 MEPM/CS 투여군에서 거의 동일한 것으로 확인되었다. 신장중 농도는 DA-1131 과 DA-l131/CS의 경우 29.l$\mu\textrm{g}$/g 및 34.2$\mu\textrm{g}$/g으로 큰 차이를 나타내지 않았으나, IPM/CS, MEPM 및 MEPM/CS 투여군에 비하여는 높은 결과로 나타났고 T/P ratio도 DA-1131과 DA-l131/CS 투여군이 IPM/CS, MEPM 및 MEPM/CS 투여군보다 놓은 것으로 확인되었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.115-122
• /
• 2010

In this study, the removal of Cs and Tc from a simulated fission products (FP) solution which were co-dissolved with U during the oxidative-dissolution of spent fuel in a mixed carbonate solution of $(Na_2CO_3-NaHCO_3)-H_2O_2$ was investigated by using a selective precipitation method. As Cs and Tc might cause an unstable behavior due to the high decay heat emission of Cs as well as the fast migration of Tc when disposed of underground, it is one of the important issues to removal them in views of the increase of disposal safety. The precipitation of Cs and Re (as a surrogate for Tc) was examined by introducing sodium tetraphenylborate (NaTPB) and tetraphenylphosponium chloride (TPPCl), respectively. Precipitation of Cs by NaTPB and that of Re by TPPCl were completed within 5 minutes. Their precipitation rates were not influenced so much by the temperature and stirring speed even if they were increased by up to $50^{\circ}C$ and 1,000 rpm. However, the pH of the solution was found to have a great influence on the precipitation with NaTPB and TPPCl. Since Mo tends to co-precipitate with Re at a lower pH, especially, it was effective that a selective precipitation of Re by TPPCl was carried out at pH of above 9 without co-precipitation of Mo and Re. Over 99% of Cs was precipitated when the ratio of [NaTPB]/[Cs]>1 and more than 99% of Re, likewise, was precipitated when the ratio of [TPPCl]/[Re]>1.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.341-344
• /
• 1999

We reported compositional separation(CS) into Co-enriched and Cri-enriched components inside the grains of Co-Cr based thin films prepared by rf sputtering. CS strongly depends on the sputtering conditions of substrate temperature and target composition. Tuning the microstructure of the Co-Cr films is important in order to employ the CS for high-density magnetic recording. We investigated the origin of CS from thermodynamic viewpoint. We employ a spinodal decomposition-like model to describe the origin of the CS in Co-Cr films. We consider the total free energy of the Co-Cr films as the sum of several free energies of; 1) thermodynamic mixing entropy of a binary solid solution, 2) magnetic ordering interaction(MOI) energy below the Curie temperature, and 3) excess interaction energy(XS) caused by the sputtering process as a function of temperature and composition. Those energies distorted the total free energy like the spinodal decomposition and caused the compositionally separated fine microstructure inside the grains. If the second derivative of the total free energy with respect to Cr composition becomes negative at a given substrate temperature, we may observe a metastable compositional separation inside the Co-Cr alloy films. We expect to exploit the microstructure of CS for ultra-high density magnetic recording.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.886-889
• /
• 2018

This article presented two-staged chemical precipitation for radioactive wastewater decontamination by using chemical agents. The total amount of radioactive wastewater was $35m^3$, and main radionuclides were Cs-137, Cs-134, and Co-60. Initial radioactivity concentration of the liquid waste was 2264, 17, and 9 Bq/L for Cs-137, Cs-134 and Co-60, respectively. Potassium ferrocyanide, nickel nitrate, and ferrum nitrate were selected as chemical agents at high pH levels 8-10 according to the laboratory jar tests. After the process, radioactivity was precipitated as sludge at the bottom of the tank and decontaminated clean liquid was evaluated depending on discharge limits. By this precipitation method decontamination factors were determined as 66.5, 8.6, and 9 for Cs-137, Cs-134, and Co-60, respectively. By using the potassium ferrocyanide, about 98% of the Cs-137 was removed at pH 9. At the bottom of the tank, radioactive sludge amount from both stages was totally $0.98m^3$. It was transferred by sludge pumps to cementation unit for solidification. By chemical processing, 97.2% of volume reduction was achieved. The potassium ferrocyanide in two-staged precipitation method could be used successfully in large-scale applications for removal of Cs-137, Cs-134, and Co-60.