• Applied Biological Chemistry
• /
• v.34 no.1
• /
• pp.21-25
• /
• 1991

Twenty-six japonica and 19 Tongil type milled rices were grouped based on water uptake rate at $23^{\circ}C$ and interrelationships between starch properties and hydration group were investigated. There were no significant differences in relative crystallinity, transmittance increase rate of 0.1% starch suspension and soluble amylose between japonica and Tongil type rices. The gel volume of starch n 3M KSCN solution of Tonsil type rice starch was significantly higher than that of japonica one. However, no correlations were observed between starch properties and hydration groups.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.109-113
• /
• 2019

The soft rice varieties, Hangaru and Singil, were developed via mutation breeding using N-methyl-N-nitrosourea treatment to obtain dry-milled rice flours. The physicochemical, morphological, and pasting properties of these starches were compared with those of Seolgaeng and Chuchung starches. Singil starch was found to exhibit the highest amylose content and initial pasting temperature, whereas Hangaru starch exhibited the highest water binding capacity and swelling power. Hangaru starch's granule size at $d_{50}$ was the largest among the four different starch types. Some Seolgaeng, Hangaru, and Singil granules were observed to have a round-faced polygon shape. Furthermore, the crystallinity of all four starch types was type A. The peak, trough, and final viscosities of the soft rice starches were also lower than those of normal starches. Notably, Hangaru starch showed the highest breakdown viscosity, but the lowest total setback viscosity among the four starches. From these results, the starch characteristics of the soft rice flours were discovered to be different based on the rice variety.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1171-1177
• /
• 1999

The changes on microstucture of recombinated gels with different ratio of amylose(A) and amylopectin(AP) which were isolated from nonwaxy rice starch were investigated by scanning electron microscope(SEM) and X-ray diffractometer. As the concentration of amylose was above 3%(1.08% of soluble amylose) in the amylose suspension, gel matrix became like a three-dimensional network. The microstructure of amylose gels showed a network including macroporous structure, but the higher the ratio of amylopectin content were, the firmer network were formed. In case of A/AP mixed gels(15%) with different amylose/amylopectin percent ratios ; 0/5, 5/10, 10/5, 15/0%, as the storage time of gels and the percent ratio of amylose content were increased, network was formed harder with thick films. While X-ray diffractograms of waxy rice starch which contained 100% amylopectin showed A type, those of purified amylose and amylopectin showed V type and amorphous patterns, respectively. Amylose(3%) gels added $2{\sim}3%$ amylopectin and A/AP mixed gels(15%) showed peak at $2{\theta}\;=\;17.0^{\circ}$which were shown B type crystallinity similar af retrograded starches. Also as the percent ratio of amylose content in mixed gels was increased, peak intensity wat increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1760-1766
• /
• 2009

Physical properties of Yukwa base extruded with glutinous rice flour, rice flour, defatted soy flour, and salt using an twin-screw extruder were investigated. The ingredients were extruded at various moisture contents (16-18%), screw speeds (300 & 400 rpm) at 43.4 kg/hr feed rate. Length and specific volume of Yukwa base increased with decreasing moisture contents. Hunter's color L* values of Yukwa base was higher whereas $a^*\;and\;b^*$ values were lower with increasing moisture content. Water absorption index of Yukwa base increased with increasing moisture contents. X-ray diffraction of Yukwa base showed B type moisture content of 16% and 17% while it showed A type moisture content of 18%. Degree of crystallinity and breaking strength of Yukwa base were the lowest in the moisture content of 16% while the lowest value for hardness was found in the moisture content of 16% and of 17% with screw speed 400 rpm for all samples. In the microstructure of cross section of Yukwa base, air cell size was larger and cell wall was thicker as moisture content increased. The sensory evaluation of the Yukwa base showed that color and flavor were not significantly different among samples, while taste, appearance, mouth feel, and overall preference were higher as moisture contents decreased.

• Korean Journal of Food Science and Technology
• /
• v.46 no.6
• /
• pp.682-688
• /
• 2014

The in vitro digestibility and molecular and crystalline structures of rice starches (Seilmi, Dasan1, and Segoami) with differing amylose content were investigated. Segoami had the highest amylose content (30.9%), whereas Dasan1 had the lowest amylose content (21.2%). The molecular weight ($\bar{M}_w$) of amylose and amylopectin in Segoami was much lower than that of the other two rice starches. Segoami had the highest proportion (8.7%) of amylopectin short branch chains (DP 6-12) and the lowest proportion of B1 chains (DP 13-24). The relative crystallinity, intensity ratio of $1047-1022cm^{-1}$ (1047/1022) and gelatinization enthalpy followed the order: Segoami>Seilmi~Dasan1. Segoami showed substantially low pasting viscosity. Rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) contents showed the highest value in Seilmi, Dasan1, and Segoami, respectively. The expected glycemic index (eGI) of Segoami was lower than that of the other two rice starches. Overall results suggested that the digestibility of rice starch could be highly influenced by their molecular and crystalline structure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.260-266
• /
• 2013

The study was carried out to determine the gel pasting properties of barley (Hordeum vulgare L. cv. Geoncheonheugbori) as affected by different proton beam irradiation. The ${\lambda}max$, blue value, and amylose content were significantly associated with increasing proton beam irradiation. The pasting time in barley flour irradiated with proton beam ranged 0.09 to 0.16 min shorter than nonirradiated barley flour. Gel pasting temperature ranged 57.4 to $60.5^{\circ}C$. Gel pasting temperature in barley flour decreased with increasing proton beam irradiation. Proton beam irradiation caused a significant decrease in the onset temperature (To), peak temperature (Tp), conclusion temperature (Tc) and enthalpy change (${\Delta}H$). Gelatinization range (R) in barley starch was more broaden than that of non-irradiated barley starch. Barley starches gave the strong diffraction peak at around $2{\Theta}$ values$15^{\circ}$, $18^{\circ}$, $20^{\circ}$, and $23^{\circ}$ $2{\Theta}$. Peak intensity tended to increase with increased proton beam irradiation. The granule crystallinity is closely associated with decreased amylose and increased amylopectin component. The crystallinity degree of barley starch irradiated with proton beam was significantly increased and it ranged from 24.9 to 32.9% compared to the non-irradiated barley starches. It might be deduced that proton beam irradiation causes significant changes of properties of starch viscosity in rice, especially at high irradiation of proton beam.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.782-793
• /
• 2005

This study investigated the effect of $2\%$ addition of pectin and alginate on the Physicochemical and retrogradation Properties of Jeungpyun, a Korean traditional fermented rice cake. The volume of batters with alginate and Pectin was significantly larger than that of control. Jeungpyun samples with Pectin and alginate had a larger volume with uniform and smaller cell size. All samples showed largest foaming capability after second fermentation. Foaming capability of the control ($0\%$ addition of pectin and alginate) was significantly larger than that of the treated samples. The amount of reducing sugar tended to increase during fermentation but decreased after steaming, which was due to the increase in hydrolysis of starch. On the contrary, the content of free sugar was slightly decreased during fermentation but slightly increased after steaming. The control contained the largest amount of free sugar after steaming. The microstructure of starch particles after fermentation showed completely dispersed starch granules with air bubbles. After steaming, the structure was sponge-like in all samples. Samples with added alginate and pectin had significantly higher water binding capacity than those of the control. All samples showed noticeably increased solubility and swelling power at $70^{circ}C$ with the control being significantly lower than the treated samples. Retrogradation was measured with $\alpha$-amylase and the retrogradation process of the sample with added alginate and pectin proceeded slower than that of the control. The relative crystallinity was observed through X-ray diffraction method and samples with added alginate and pectin had smaller crystallinity and delayed retrogradation compared to the control. Thus, Jeungpyun with the addition of alginate and Pectin demonstrated improved functionality and dietary fiber addition effect. The storage period of was extended as the retrogradation rate was delayed by the addition of dietary fibers.

• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.174-181
• /
• 2015

This study investigated the physicochemical properties of three different types of rice flour prepared via dry and wet milling. The powder, soft, and hard-types of rice flour were Suwon No. 542, Suwon No. 541, and Unbong No. 30, respectively. The analysis of the proximate compositions of the different types of rice flour showed that their moisture content was 7.03~7.99%, their crude protein was 7.94~8.35%, their crude lipid was 0.71~1.49% and their crude ash was 0.25~0.82%. For the Hunter's color values, the L value was highest in the wet-milled rice flour, the a value was highest in the dry-milled rice flour, and the b value was highest in the dry-milled rice flour. All the samples showed distinctive rice starch particles in the particle analysis using scanning electron microscope. The dry-milled rice flour showed the greatest amount of irregular particles and the coarsest texture. The water absorption and water solubility indices were higher in the wet-milled soft- and hard-type rice flour. The crystallinities of the samples by X-ray diffractography were all A-type, but the crystallinity of the dry-milled hard-type rice flour was higher in diffraction degree. For the amylogram properties, the wet-milled soft-type rice flour showed the highest maximum viscosity, breakdown and setback. In the meanwhile, the dry-milled soft-type rice flour showed the highest initial pasting temperature, onset, peak, and end temperatures despite of the reverse enthalpy.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.31-39
• /
• 2020

The effects of heat-moisture treatment (HMT) on the functional properties of high amylose rice starches (HARSes) purified from Korean rice varieties (A-type Goami and Singil and B-type Dodamssal and Goami2) were investigated. HMT was accomplished with moisture contents of 18 and 27% and heated at 100℃ for 16 h. While the amylose content, swelling power and solubility decreased after HMT, the water binding capacity and resistant starch (RS) content increased with increasing moisture content after HMT. The X-ray diffraction patterns of all HARSes did not change after HMT, but a decrease in the intensity of peak at 2θ=5° was observed in B-type HMT HARSes. While the starch granules aggregated after HMT, their shape and size remained unchanged. B-type HARSes exhibited higher gelatinization temperatures and lower pasting viscosities than A-type HARSes following HMT. The results, thus, suggest that while the crystalline intensity of B-type Dodamssal and Goami2 rice starches did not change after HMT, the RS content, water binding capacity, and pasting temperatures of all HARSes increased with increasing moisture content after HMT.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.905-913
• /
• 2003

The physicochemical properties of rice flour roasted at various temperatures and times were analyzed, and the quality characteristics of tarakjuk made from these roasted rice flours were investigated. As roasting temperature and time increased, rice flour showed decreasing moisture, protein content, and glucose the major reducing sugar of rice flour. Total amino acid content did not show any significant changes, but the amount of free amino acids and individual amino acids, such as lysine, tryptophane, and tyrosine, decreased. A decrease in L value and increases in a and b values from both roasted rice flour and tarakjuk was observed. Reduced crystallinity and gelatinization temperatures of roasted rice flour were investigated with X-ray diffractogram and DSC, respectively. The thermal transitions between $100.6{\sim}127.6^{\circ}C$ of tarakjuk by DSC are considered to be due to the melting of amylose-lipid complex. As the roasting temperature and time of rice flours increased, tarakjuk showed lower viscosity and higher spreadability. Sensory characteristics, such as nutty flavor, color intensity, and gritty texture increased significantly. Tarakjuk made from rice flour roasted at $185^{\circ}C$ for 25min showed the highest score on overall preference. From the above results, roasted rice flour produced more preferable tarakjuk than nonroasted flour in terms of sensory quality.