• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.51-59
• /
• 2012

Piezoelectric langasite crystals have superior properties such as high temperature performance and high quality Q and can be applied in combustion pressure sensors and surface acoustic wave (SAW) filters. Crystal growth, crystal structure and properties of langasite group are reviewed, and the mechanism of piezoelectricity of langasite is presented based on the crystal structure and deformation under high pressure. Finally, for the discovery of new piezoelectric materials, this paper presents the role of the framework, and recommends the search of framework crystal structure, because the characteristic of the mechanism exists on the framework of the crystal structure.

• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.713-721
• /
• 1997

Molecular dynamic (MD) simulations with new interatomic potential function including the covalent bond were performed on the phase transition of $\alpha$-quartz-type GeO2 under high pressure. The optimized crystal structure and the pressure dependence of the lattice constant showed higher reproducibility than the previous models and were in very good agreement with the experimental data. A phase transition of $\alpha$-quartz and $\alpha$-quartz-type GeO2 by simulation was found approximately 24 GPa and 6-7 GPa, respectively. This phase transition involved an abrupt volume shrinkage and showed 4-6 coordination mixed structure with the increasing in the coordination number of cation.

• Journal of Sensor Science and Technology
• /
• v.13 no.3
• /
• pp.175-181
• /
• 2004

A pressure sensor for high temperature was fabricated by using a SDB(Silicon-Direct-Bonding) wafer with a Si/$SiO_{2}$/ Si structure. High pressure sensitivity was shown from the sensor using a single crystal silicon of the first layer as a piezoresistive layer. It also was made feasible to use under the high temperature as of over $120^{\circ}C$, which is generally known as the critical temperature for the general silicon sensor, by isolating the piezoresistive layer dielectrically and thermally from the silicon substrate with a silicon dioxide layer of the second layer. The pressure sensor fabricated in this research showed very high sensitivity as of $183.6{\mu}V/V{\cdot}kPa$, and its characteristics also showed an excellent linearity with low hysteresis. This sensor was usable up to the high temperature range of $300^{\circ}C$.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1996

Polycrystalline ZrH2 in tetragonal crystal system has been compressed in a modified Bassett-type diamond anvil cell up to 36.0 GPa at room temperature. X-ray diffraction data did not indicate any phase transitions at the present pressure range. The pressure dependence of the a-axis, c-axis, c/a and molar volume of ZrH2 was determined at pressures up to 36.0 GPa. Assuming the pressure derivative of the bulk modulus (K0') to be 4.11 from an ultrasonic value on Zr, bulk modulus (K0) was determined to be 160Gpa by fitting the pressure-volume data to the Birch-Murnaghan equation of state. Same sample was heated at $500^{\circ}C$ at the pressure of 9.8 GPa in a modified Sung-type diamond anvil cell. Unloaded and quenched sample revealed that the original tetragonal structure transforms into a hexagonal structured phase with a zero-pressure molar volume change of ~115.5%.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.3
• /
• pp.127-136
• /
• 2017

High pressure has been applied to check the pressure effect on the powdered $TiO_2$-complex, which was synthesized for ultra-violet rays cutoff and antimicrobial applications. $TiO_2$-complex consists of anatase, rutile and silver chloride. Grain size was determined to be ~34 nm. Both anatase and rutile begin structural phase transitions to $ZrO_2$ (baddeleyite)-type crystal structures at 14~16 GPa, then sustain their phases up to 22.7 GPa. Under decompression to 0.0001 GPa (ambient pressure), rutile transforms to another phase with ${\alpha}-PbO_2$ structure, while anatase retains its high pressure structure upon complete decompression. Silver chloride peaks disappear at the low pressures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.305-310
• /
• 2013

In this paper, the pressure sensor usable in a high temperature, using a SDB(silicon-direct-bonding) wafer of Si/$SiO_2$/Si-sub structure was provided and studied the characteristic thereof. The pressure sensor produces a piezoresistor by using a single crystal silicon as a first layer of SDB wafer, to thus provide a prominent sensitivity, and dielectrically isolates the piezoresistor from a silicon substrate by using a silicon dioxide layer as a second layer thereof, to be thus usable even under the high temperature over $120^{\circ}C$ as a limited temperature of a general silicon sensor. The measured result for a pressure sensitivity of the pressure sensor has a characteristic of high sensitivity, and its tested result for an output of the sensor further has a very prominent linearity and hysteresis characteristic.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.87-91
• /
• 2009

Fluorine-doped $SmFeAsO_{1-x}F_x$ single crystals with the nominal value of x=0.2 were grown at $1350-1450^{\circ}C$ under the pressure of 3.3 GPa by using the self-flux method. Plate-shaped single crystals in the range of a few-150 ${\mu}m$ in their lateral size were obtained. The detailed crystal structure was analyzed by using the x-ray diffractometry. Superconducting transition temperature, determined by the resistive transition, of a single crystal was about 49 K with a narrow resistive transition width of ${\sim}1$ K. A relatively sharp transition, a low residual resistivity, and a large residual resistivity ratio compared with those reported for $REFeAsO_{1-x}F_x$(RE=Sm, Nd) single crystals indicate the high quality of our single crystals.

• Applied Microscopy
• /
• v.42 no.2
• /
• pp.111-114
• /
• 2012

The scanning electron microscopy is an ideal technique for examining plant surface at high resolution. Most hydrate samples, however, must be fix and dehydrate for observation in the scanning electron microscope. Because the microscopes operate under high vacuum, most specimens, especially biological samples, cannot withstand water removal by the vacuum system without morphological distortion. Cryo-techniques can observe in their original morphology and structure without various artifacts from conventional sample preparation. Rapid cooling is the method of choice for preparing plant samples for scanning electron microscopy in a defined physiological state. As one of cryo-technique, high-pressure freezing allows for fixation of native non-pretreated samples up to $200{\mu}M$ thick and 2 mm wide with minimal or no ice crystal damage for the freezing procedure. In this study, we could design to optimize structural preservation and imaging by comparing cryo-SEM and convention SEM preparation, and observe a fine, well preserved Arabidopsis stem's inner ultrastructure using HPF and cryo-SEM. These results would suggest a useful method of cryo-preparation and cryo-SEM for plant tissues, especially intratubule and vacuole rich structure.

• Carbon letters
• /
• v.16 no.1
• /
• pp.45-50
• /
• 2015

High crystallinity coke-based activated carbon (hc-AC) is prepared using a potassium hydroxide solution to adsorb carbon dioxide ($CO_2$). The $CO_2$ adsorption characteristics of the prepared hc-AC are investigated at different temperatures. The X-ray diffraction patterns indicate that pitch-based cokes prepared under high temperature and pressure have a high crystal structure. The textural properties of hc-AC indicate that it consists mainly of slit-like pores. Compared to other textural forms of AC that have higher pore volumes, this slit-pore-shaped hc-AC exhibits higher $CO_2$ adsorption due to the similar shape between its pores and $CO_2$ molecules. Additionally, in these high-crystallinity cokes, the main factor affecting $CO_2$ adsorption at lower temperature is the pore structure, whereas the presence of oxygen functional groups on the surface has a greater impact on $CO_2$ adsorption at higher temperature.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.212-221
• /
• 2001

This paper introduces the characteristics and generation of the synchrotron radiation (SR). SR has the very high spectral brilliance, broad spectral range, X-ray wavelength tunability, high degree of polarization and collimation, and pulsed time structure. Also describes the technologies to apply in the fields of geology and environmental sciences. These include X-ray tomography, XRF, EXAFS, XANES, DAC, IVP experiments. Further, nuclear power generation and nuclear waste disposal methods are mentioned relating to energy. Using these, analyses of the chemistry, crystal structure and chemical combining states of minerals and rocks can be carried out. Applications in the fields of the economic geology, paleontology and environmental sciences are open too. Informations of the Earth interior materials' behavior under high pressure-temperature can be acquired.