• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.306-317
• /
• 1995

수평 브릿지만법은 갈륨 비소 반도체 결정을 성장시키는데 많이 사용된다. 수평 브릿지만 법에 의하여 성장된 단결정 내에서 불순물 분포를 알아보기 위하여 성장 과정 중의 액상에서 열전달, 물질전달, 유체흐름과 고상에서 열전달을 의사 정상상태를 가정하여 2차원 및 3차원 모델을 세우고 유한요소법에 의하여 수치모사하였다. 이때 고-액 계면의 위치와 형태도해의 일부분으로 다른 해들과 동시에 구하였다. 2차원 단열 경계조건에서는 3차원의 계면이 2차원의 경우보다 덜 휘어졌고, 대류 강도는 비슷하였다. 대류강도의 증가에 따라 수직 편석은 최대값을 보였으나 계면이 2차원에서 더 휘어져 최대값은 2차원에서 대류 강도가 더 작을 때 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.437-438
• /
• 2008

The Conventional patterned vertical alignment (PVA) device shows a very high contrast ratio at normal direction and does not require rubbing process. However it has a disclination area in which the liquid crystal can be collision in the boundary domain region. In this paper, we studied PVA(Z-shape) device in which the liquid crystal can be tilted down in multiple directions stably because the surface pretilt angle is controlled by photopolymerization of the UV - curable reactive mesogen (RM) under a proper condition. Consequently, the device shows improved electro optical properties as compared to conventional PVA mode.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.271-277
• /
• 1984

To study interface between crystals grown and molten state in the crusible. Pulling and rotating rate of the shaft were varied in LiF crystal growth by Czochralski method. Lower speed of the pulling and rotating rate increased the degree of convexity in solid-liquid interface and higher speed of the pulling and rotating rate decreased it. Optimum condition of LiF crystal growth obtained as pulling rate was 6.5cm/h when it rotated as 46rpm.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.60-61
• /
• 2006

In this contribution, we attempted a theoretical analysis on the validity of the widely-accepted idea that rough and singular surfaces can coexist in a crystal at equilibrium. By manipulating the Cahn and Hoffman capillarity vector, the conclusion that a crystal at equilibrium should be composed either of singular surfaces or of rough ones was reached.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.589-594
• /
• 2020

Many electronic applications require magnetic materials with high permeability and frequency properties. We improve the magnetic permeability of soft magnetic powder by controlling the shape magnetic anisotropy of the powders and through the preparation of amorphous nanoparticles. For this purpose, the effect of the shape magnetic anisotropy of amorphous Fe-B-P nanoparticles is observed through a magnetic field and the frequency characteristics and permeability of these amorphous nanoparticles are observed. These characteristics are investigated by analyzing the composition of particles, crystal structure, microstructure, magnetic properties, and permeability of particles. The composition, crystal structure, and microstructure of the particles are analyzed using inductively coupled plasma optical emission spectrometry-, X-ray diffraction, scanning electron microscopy and focused ion beam analysis. The saturation magnetization and permeability are measured using a vibrating sample magnetometer and an LCR meter, respectively. It is confirmed that the shape magnetic anisotropy of the particles influences the permeability. Finally, the permeability and frequency characteristics of the amorphous Fe-B-P nanoparticles are improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1659-1661
• /
• 2004

Measurement of supersaturation is important in crystallization processes, because it is one of key factors to control crystal size distribution and shape determining product quality. A monitoring system of the supersaturation using a quartz crystal sensor is applied to the supersaturation measurement. From the variation of resonant frequency, the beginning of the formation of salt crystal on the sensor surface is detected while the sensor is directly cooled down. The degree of supersaturation is computed from the solubility difference at the temperatures of the salt solution and the sensor. The performance of the propsed system of the supersaturation measurement is examined by applying the system to the crystallization of three different salt solutions. The experimental outcome compared with eye observation result and photographic analysis indicates that the proposed system is effective and useful to determine the supersaturation in the crystallization process. In addition, the microscopic monitoring of the initial stage crystallization is available with the sensor system.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.190-198
• /
• 1994

자체 제작한 EFG 장치를 이용하여 ${alpha}-Al_2O_3$ rod 형태의 단결정을 육성하였다. EFG법의 원리를 연구하여 성장 조건을 수립하였고 성장한 단결정의 결함 voids, striation, 균열, 과 냉각 현상을 광학현미경으로 분석하였다.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.388-397
• /
• 1999

Numerical simulations are carried out for the magnetic Czochralski single crystal growth system. It Is shown that a magnetic field significantly suppresses the convective flow and as the strength of magnetic field becomes to be stronger, the heat transfer in the melt is dominated by conduction rather than convection. By imposing a cusp magnetic field, the growth interface shape becomes convex toward the melt. When the axial magnetic field is imposed, there occurs an inversion of the interface shape with increase of the magnetic field strength. The oxygen concentration near the interface decreases with increasing cusp magnetic field strength while axial field causes an increase of an oxygen concentration at the central region and decrease of that at the edge of the crystal. The results show that the cusp magnetic field has advantages over an axial magnetic field In the radial uniformity of oxygen as well as in the additional degree of control.

• 한국결정성장학회지
• /
• 제26권6호
• /
• pp.252-257
• /
• 2016

Tonpilz 트랜스듀서를 이용한 미세먼지의 포집 거동을 살펴보기 위하여 유한요소법(FEM) 시뮬레이션을 이용하여 미세먼지의 응집 거동을 모사하였다. 원판형 head mass의 두께와 tail mass의 직경, 그리고 고정 볼트의 깊이를 트랜스듀서의 형상 변수로 고려하였다. 도넛형 압전체의 소재로는 기존의 PZT-4 소재와 서로 다른 특성의 두 가지 압전 단결정에 대하여 그 출력에 미치는 형상 변수의 최적화를 구현하였고 이를 통하여 얻은 트랜스듀서를 이용하였을 때 나타나는 미세먼지의 응집 거동을 다중 물리해석 S/W인 COMSOL을 이용하여 모사하였다.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.183-187
• /
• 2011

고분자 안정화 블루상 액정셀(Polymer-stabilized blue phase liquid crystal cell)은 ${\mu}s$ 단위의 응답속도와 광시야각 및 액정의 배향을 위한 문지름 과정이 필요 없는 장점이 있다. 그러나 높은 구동전압과 낮은 kerr 상수값으로 인해 유도되는 복굴절의 값이 낮아 고분자 안정화 블루상 액정셀의 전기광학특성을 저해하는 요인이 되었다. 본 논문에서는 지그재그 형태의 전극 구조를 제안하고 시뮬레이션을 통하여 제안된 전극 구조를 가지는 액정셀의 투과율 손실 없이 구동전압을 25%이상 낮출 수 있음을 확인하였다.