• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.121-124
• /
• 1997

Emergence of advanced materials has been realized by the great demands for sophisticated state devices in high technology industry. It is the ear of speedy evolution of science and technology, in particular, materials processing technology, which enables us to synthesize any materials with respect to its purity and its perfection of crystal structure and shape (form) that have, heretofore not been available. The availability of ultra pure, fine raw materials, single crystals and thick/thin film materials has been largely responsible for such startling progresses that have been made in the realization of unforeseen, functional devices for high technology industry. Of the functional devices such as passive as active devices, non-silicon devices are mostly passive. Piezoelectric, electro-optic, magneto-optic devices, etc. are some of the examples. In this paper, magneto-optic materials for Faraday device, which is little known, are reviewed including its processing toward practical applications.

• 한국결정성장학회지
• /
• 제13권1호
• /
• pp.24-30
• /
• 2003

The preparation of $PbTiO_3$ powder was carried out using the oxide starting material by hydrothermal method. The powder of a crystalline phase with perovskite structure was synthesized. The optimum conditions for the preparation of powder were as follows; hydrothermal solvent; 8M-KOH or 8M-NaOH, reaction temperature; 250~$270^{\circ}C$, run time; 10 h. The ,shape of synthesized powders were well developed crystalline faces with specific surface area of about 2.3 $\textrm m^2$/g in KOH solution and about 5.0 $\textrm m^2$/g in NaOH solution. The cell parameters of powder were a = 3.90$\AA$, c = 4.14 $\AA$ and cell volume was 57.30 $\AA^3$. The cell ratio (c/a) of powder was the same as the theoretical ratio with c/a = 1.06 and the phase transition temperature(Tc) of the powders was about $470^{\circ}C$.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.159-165
• /
• 2000

본 연구에서는 남해안 일대의 굴 고막, 바지락 패각에 대한 부존환경을 조사하였으며 그리고 부존환경 개선, 환경오염 방지 등을 위한 패각의 재활용 방안을 확립하였다. 패각의 부존환경은 공유수면의 불법매립 또는 연안지역에 야적 .방치된 상태였다. 부존패각의 효율적인 재활용을 위하여 성인 메카니즘 그리고 XRD, TG-DTA분석을 행한 결과, 탄산칼슘으로의 제조가 최적임을 알았다. 본 연구에서는 부존 패각을 탄산칼슘과 과립형의 패화석비료로 재활용하였다.

• 한국결정성장학회지
• /
• 제21권3호
• /
• pp.119-123
• /
• 2011

Carbon nanotilaments (CNFs) could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and$H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ as a cyclic modulation manner, the geometries of carbon coils-related materials, such as nano-sized coil and wave-like nano-sized coil could be observed on the substrate. The characteristics (formation density and morphology) of as-grown CNFs with or without $SF_6$ incorporation were investigated. Diameter size reduction for the individual CNFs-related shape and the enhancement of the formation density of CNFs-related material could be achieved by the incorporation of $SF_6$ as a cyclic modulation manner. The cause for these results was discussed in association with the slightly increased etching ability by $SF_6$ addition and the sulfur role in SF 6 for the geometry change.

• 한국결정성장학회지
• /
• 제24권5호
• /
• pp.219-223
• /
• 2014

Pulsed laser ablation in liquid medium was successfully employed to synthesize hydroxyapatite colloidal nanoparticles. The crystalline phase, particle morphology, size distribution and microstructure of the hydroxyapatite nanoparticles were investigated in detail. The obtained hydroxyapatite nanoparticles had spherical shape with sizes ranging from 5 to 20 nm. The laser ablation and the nanoparticle forming process were discussed with explosive ejection mechanism by investigating change of surface morphology on target. The analytical results of XPS, FT-IR and Raman spectroscopy confirms that the stoichiometry and bonding properties of the hydroxyapatite nanoparticles are in good agreement with reported bulk hydroxyapatite materials.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.49-54
• /
• 1998

수열법에 의하여 $BaTiO_3$ 미립자를 합성하였다. 출발원료로는 $TiO_2$와 $Ba(OH)_2{\cdot}8H_2O$를 사용하고 과량의 $Ba(OH)_2{\cdot}8H_2O$를 투입함으로써 증류수만을 용매로 사용하여 $150^{\circ}C$의 저온에서 BaTiO3 미립자를 합성할 수 있었다. 합성된 입자의 형태는 구형에 가까운 부정형이었으며, 입자의 크기는 합성온도 및 Ba/Ti 원자비에 따라 변화되었다.

• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.176-179
• /
• 2001

Iron oxide powders were prepared under high temperature (up to $175^{\circ}C$) and pressure conditions( up to 129 pasi) by precipitation from metal nitrates with aqueous potassium hydroxide. Various types of iron oxide powders were obtained at different conditions. The size and the shape of the particles can be controlled as afunction of starting solution pH. The average particles size of the synthesized iron oxide powders increased, the particle shapes of the powders became fibrous, and the crystalline phase of the powder changes from iron oxide to iron hydroxide with increasing solution pH. The effects of synthesis parameters are discussed.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.209-225
• /
• 1999

Detailed description of the crystal growth methods permitting one to obtain complicated shape crystals from the melt is given. The variable shaping technique provides the growth of crystals with a discrete altering cross-section configuration during crystallization. The dynamic local shaping technique enables one to grow items with a continuous alteration of the side surface profile by a preset program.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 1999년도 추계 기술심포지움 논문집
• /
• pp.111-115
• /
• 1999

The $Li_2O-MgO-MgF_2-SiO_2$glasses with addition of $B_2O_3$ were investigated in order to make glass-ceramics for low temperature firing substrate. Glasses were made by melting at $1450^{\circ}C$ in the electronic furnace and crystallized at $750^{\circ}C$. After the crystallization, crystal phases and microstructure were observed. The crystal phases were polycrystalline of lithium boron fluorphlogopite and lithium fluorhectorite. The crystal shape was changed to grande type from needle type with the increase in $B_2O_3$ contents. Average particle size of the glass-ceramics aftar water swelling was $3.77{\mu}{\textrm}{m}$. The optimum sintering temperature and sintering shrinkage of the substrate were $900^{\circ}C$ and 13.4vol%, respectively.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.120-125
• /
• 2002

Si-wafers for solar cells were cast in a size of $50{\times}46{\times}0.5{\textrm}{mm}^3$ by vacuum casting method. The graphite mold coated by BN powder, which was to prevent the reaction of carbon with the molten silicon, was used. Without coating, the wetting and reaction of Si melt to graphite mold was very severe. In the case of BN coating, SiC was formed in the shape of tiny islands at the surface of Si wafer by the reaction between Si-melt and carbon of the graphite mold on the high temperature. The grain size was about 1 mm. The efficiency of Si solar cell was lower than that of Si solar cell fabricated on commercial single and poly crystalline Si wafer. The reason of low efficiency was discussed.