• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.203-204
• /
• 2023

Recycled aggregate is an aggregate that satisfies the quality as an aggregate by crushing waste concrete and passing it through a separator. The government grants a floor area ratio of up to 15% and building height mitigation when more than 25% of the recycled building materials are used. In addition to environmental protection issues, it is necessary to actively utilize recycled aggregates that meet the standards to secure the business feasibility of buildings. This study attempted to derive the results according to the substitution rate by measuring the chloride ion diffusion characteristics based on the electrophoresis method.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.458-465
• /
• 2017

본 연구에서는 굴 패각을 원료(골재)로 활용하기 위한 물리적인 가공방법에 관한 것을 실험을 통해 검토하고자 하였다. 실험결과 굴 패각의 형상에 의해 분쇄된 굴 패각의 적정 입도는 10mm 보다 작아야 될 것으로 판단된다. 또한 가동시간과 회수율, 각 입도별 잔류율과 다양한 입도분포를 고려할 때 굴 패각의 분쇄에는 커터 밀이 적합한 것으로 나타났다. 커터 밀의 경우, 8mm의 내부 스크린을 적용할 때, 회수율은 97.3% 12mm를 적용할 때, 98.2%, 20mm일 때, 98.9%로 나타나 스크린 사이즈가 커짐에 따라 회수율은 다소 증가되는 것으로 나타났다. 커터 밀의 내부 스크린과 인버터의 속도 차이에 의한 실험결과 스크린의 크기가 작을수록, 인버터의 속도가 빠를수록 조립률은 낮아지는 것으로 나타났으며, 동일한 스크린에서 인버터 속도의 상승은 더욱 낮은 입도범위의 재료 회수가 가능한 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• 한국지반공학회논문집
• /
• 제27권6호
• /
• pp.63-79
• /
• 2011

본 연구에서는 Bottom Ash와 표준사의 상대밀도시험을 실시하여 시험결과를 토대로 40%, 55%, 70%의 상대밀도로 반복삼축시험을 실시하였다. 또한, 55%의 상대밀도로 세립분 함유량에 따른 반복삼축시험을 실시하였다. 시료는 No.40체, No.60체, No.100체, No.200체 잔류시료로 분류를 하여 현장에서 시료의 다짐을 실시한 경우 발생될 수 있는 시료의 파쇄를 고려하여 Bottom Ash를 A다짐 몰드를 이용한 파쇄시험을 실시하였다. 각 체의 잔류시료의 파쇄특성을 고려하면 A다짐에 따른 파쇄율은 약 30%까지 증가하게 되어 세립분 함유량을 10%, 20%, 30%로 조정하여 상대밀도 시험을 실시하였다. 상대밀도에 따른 반복삼축시험을 통해 Bottom Ash의 액상화 저항특성을 분석하였다. 시험결과 Bottom Ash의 경우 파쇄강도가 표준사에 비해 작아 축차응력에 크기에 따라 기존 포화사질토와 상이한 액상화 거동특성을 보였으며, 시료의 세립분의 함유량에 따라 액상화 저항특성이 최대인 세립분 함유량을 찾을 수 있었다.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.71-76
• /
• 2007

가정에서 분리 배출된 폐플라스틱은 일반적으로 수선별 등 분리선별 공정을 거친 후 종말품으로 회수되어, 현재 대부분이 매립이나 소각되고 있다. 혼합폐플라스틱 종말품의 경우 2006년 약 175만톤 발생된 것으로 예측되고 있으나, EPR실시 이후로 발생량은 2000년에 비해 2배 이상 크게 증가한 실정이다. 특히, 혼합폐플라스틱 종말품의 경우 PVC 함량(4 wt.% 이하)이 매우 높아 이들의 재활용에 커다란 제약이 되고 있다. 본 연구에서는 혼합폐플라스틱 종말품으로부터 풍력 및 습식 비중선별장치를 이용하여 폴리올리핀계 (PE, PP, PS) 플라스틱을 경량물로 회수하는 선별시스템을 개발하였다. 본 선별시스템은 풍력선별, 자력선별, 1단계 파쇄, 정량공급 및 습식 비중선별 공정으로 구성되어 있으며, 습식 비중선별 공정은 원심분리를 기본으로 혼합-세척-선별 및 탈수가 단일장치내에 집약된 특징이 있다. 또한, 본 연구에서는 연질 플라스틱의 분쇄 효율을 크게 개선한 파쇄기를 개발하였다. 개발된 습식 비중선별장치의 용량은 시간당 0.5 톤으로, 이를 이용하여 회수된 경량물의 PVC 함량은 0.3wt.% 이하이며, 경량 및 중량 회수물의 수분 함량도 각각 10% 이하를 달성하였다.

• 한국지반공학회논문집
• /
• 제27권10호
• /
• pp.35-43
• /
• 2011

본 연구의 대상지역은 영주댐 건설로 인해 이설되는 중앙선 철도 건설 예정지로 수 km에 걸쳐 연성전단작용에 의한 습곡과 압쇄암이 분포한다. 연성전단대는 지질시대 동안 작용한 단층작용으로 변형되어 복잡한 지질구조를 보인다. 연성전단대는 고온고압의 지하십부(>8km)에서 작용한 변형에 의한 광물의 재결정 작용으로 엽편상의 유동조직을 가지는 압쇄암이 발달하며, 이로 인해 지표부근(<2km)의 변형으로 형성된 단층대와 구별되는 공학적 특성을 가진다. 압쇄암의 특성을 파악하기 위해 시편으로 제작된 암석을 대상으로 변형률과 변형에 수반된 압축구조의 모양을 분석하였다. 단층대의 변형된 모양은 엽리상의 편원(oblate)한 모양이 우세한 반면 압쇄대는 광물의 신장에 의한 편장(prolate)한 형태가 우세하다. 변형률은 변형이전 상태를 기준으로 단층대가 1.2배미만의 변형을 보이는 것에 비해 압쇄대는 최대 2.5배의 변형을 나타내는 것으로 분석되었다. 불연속면을 기준으로 적용한 암반분류에서 경암의 일축압축강도는 연암정도의 강도를 보였으며, 일정 시간 수침 후에 강도의 변화가 관찰 되었다. 본 연구결과 조사된 암석들의 공학적 특성은 광물조성과 화학 조성에 기초한 풍화저항력이 비교적 높은 것을 고려할 때 압쇄작용에 수반된 미세균열구조에 의한 것으로 판단되었다. 따라서 압쇄암이 넓게 분포하는 지역에서 터널굴착을 하는 경우, 미세균열에 의한 팽창과 지하수 유입에 의한 강도저하가 발생할 수 있으므로 시공시 각별한 주의가 필요한 것으로 판단되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.49-50
• /
• 2015

Recently, by-products from concrete industry are generated in large quantities because of urban redevelopment. Accordingly, waste concrete powder(WCP) inevitably generated in the course of crushing, screening, and separating the waste concrete also show high emission and be increasing gradually, but which is mostly buried with waste concrete aggregate. This is a basic research to increase the value added utilization rate of WCP. We have examined strength characteristic of extruding panel with WCP, depending on the curing methods. The result of study shows similar strength to the base specimen in autoclave curing condition. And in autoclave curing condition, the specimen with WCP of 20% and 30% satisfy the target strength of 14MPa.

• 산업기술연구
• /
• 제22권A호
• /
• pp.119-125
• /
• 2002

In Kwangjin industrial company, mill is operating for the foundry sand production at the rate of 25t/hr from quartzite. Foundry sands fall into four distinct categories: silica sand, lake sand, bank sand, and natural molding sand. Silica sand is a general term used to describe crushed, washed, graded, dried, and cooled clay-free sands. This study was conducted for the investigation of the foundry sand productivity and the life span of the hammer according to the material quality. The life time of hammer from several manufacturer were compared in order to find out the grinding efficiency of the various hammer material. In the result of tests, the life time of high-Mn hammer was 10.5 hours while that of high-Cr was 19.5 hours. The life time in case of typical worn shape hammers was about 12 hours and the average time of a blowhole hammer was about 6.5 hours.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.124-127
• /
• 2003

Sewage sludge and clay used as raw materials in the study. Green aggregates contain different contents by dried weight of the sewage sludge, up to 80 percent is manufactured and burning conditions of soak temperature, soak time and rate of temperature increase. influence of burning condition and mixing ratio on specific gravity of burned aggregate are discussed. The appropriate burning condition to all aggregates is evaluated. Aggregates result form the thermal treatment get specific gravity under 0.8, water absorption fewer than 7.5 percent, and aggregate crushing value from 28 to 53. As the result, aggregates can be available as the lightweight aggregate for non-structural concrete.