• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.19-20
• /
• 2015

In this research, by examining the influence that high quality fine aggregate and low quality fine aggregate have on the strength of concrete through tests, the manifest strength of concrete according to high quality fine aggregate was reviewed. The results showed that compared to low quality fine aggregate usage mixture, the unit volume to achieve the same liquidity decreased and accordingly the W/B also decreased therefore increasing the strength of concrete, and as high quality fine aggregate was used, it is determined that there can be improvements to the economically feasibility of usage mixture and improvement in durability etc.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.399-402
• /
• 2003

This study is performed to examine the physical and mechanical properties of the high strength concrete using recycled aggregate. The recycled aggregate is replaced by 0%, 25%, 50%, 75%, 100% of natural crushed aggregate. The compressive strength of the concrete used recycled aggregate is shown in more than $400kgf/cm^2$ at the curing age 28 days. But the pulse velocity and dynamic modulus of elasticity are decreased with increasing the content of recycled aggregate. Accordingly, these recycled aggregate concrete can be used for high strength concrete.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.520-525
• /
• 2001

Compared with the blast furnace slag, steel slag has the expansibility due to the reaction with water and free CaO. Therefore it is specified in Standard Specification for Concrete in Korea that steel slag aggregate must not be used in concrete. So it is unusual to use steel slag aggregate in concrete. In this study steel slag aggregate processed by several aging process was comparatively satisfied with fundamental properties as concrete aggregate, which are specific gravity, absorption, unit weight, percentage of solids and abrasion value etc. And chemical analysis is observed to understand the effect of aging process in steel slag aggregate. When the strength is measured, it is found that the concrete replacing crushed stone with steel slag aggregate had a little problem without sufficient aging process

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.166-167
• /
• 2013

Bottom ash, which is discharged through a wet process in a thermal power plant, contains much unburned coal due to quenching and much salt due to seawater. However, dry bottom ash discharged through a dry process contains low unburned coal and salt, and has light -weight due to many pores. Therefore, it is expected that it can be used as lightweight aggregate. This study deals with the basic properties of concrete used dry bottom ash as coarse aggregate. As a results, the concrete having high content of dry bottom ash aggregate showed high slump by using water reducing agent and its air content was within 5±1.5% as designed value, similarly to normal weight concrete. It also showed a lower compressive strength than 100% of crushed stone.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.317-322
• /
• 2001

This paper investigates the influence of fine aggregates on bleeding of concrete. According to test results, as water content decreases, crushed sand content increases, fluidity shows decline tendency. As for aggregates kinds, concrete using sea sand shows most fluidity loss among the tested results. Compressive strength gains highly when crushed sand is used. As for bleeding of concrete, bleeding shows decline tendency because of increasing in powder content and filling effect of voids. Bleeding amount is in a decreasing order of magnitude for concretes made with the following aggregates: sea sand, river sand, and crushed sand. Accordingly, crushed sand mixed with river sand and sea sand with certain proportion enable to reduce bleeding and enhance strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.81-84
• /
• 2006

Currently, natural aggregates of good quality are hard to use because of continuous decrease of internal aggregate resource and regulation of gathering. So, use of crushed sand was being increased. On the other hand, skyscraper projects with 100 stories are being planned within the country and high strength concrete must be used to construct a skyscraper with 100 stories. High strength concrete is necessary to use crushed sand too because we are still unable to secure natural aggregates of good quality. So, This study indicated basic data necessary for mix design of high strength concrete through valuation of concrete property by quality variation of crushed sand.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.437-440
• /
• 2006

Generally, the strength of concrete depends on factors of materials, mix proportions, compaction, manufacturing methods and curing and so on. And recently, it has increased the using of crushed sand for concrete due to the exhaustion of good natural aggregate. This is an experimental study to compare and analyze the fluidity and compressive strength of ultra-high strength concrete according to the replacement ratio of crushed sand. For this purpose, the mix proportions of concrete according to the W/B ratio and replacement ratio of crushed sand was selected. And then air content, slump-flow, O-lot, compressive strength test were performed.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.67-74
• /
• 2012

PURPOSES: In this study the influence factors related to abrasion resistance of interlocking concrete block have been evaluated, and comparisons between various domestic and foreign abrasion test methods was also accomplished. METHODS: The modified rotational cutting method suggested in ASTM C 944 was applied. Surface materials with different types of fine aggregate such as crushed sand, sea sand, and mixture of crushed and sea sand were tested to compare the aggregate effect for abrasion resistance. RESULTS: The different surface mixtures with various W/C ratios, mortar and fly ash ratios have been investigated for functional and economical considerations. CONCLUSIONS: This study had obtained reliable results by changing diamond blade of rotating cutter. Therefore, in order to improve the abrasion resistance of interlocking concrete block for road, a new mix design was proposed.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.83-90
• /
• 2003

In order to offer some fundamental data for recycling the excavated rocks, the component and mechanical characteristics was investigated for the excavated rocks, by means of X-ray diffraction analysis, strength test, slacking test and abrasion test were performed. It appeared that the unconfined compressive strength and the elastic wave velocity were the highest in the sound rock. The dissipation rate by stability tests was found to be high in the case of the slacking index of 98% because of more bedding and more clay minerals. The apparent specific gravity of some crushed aggregate was decreased because they included easily weathered minerals while both the absorption and the abrasion were increased. The results in this study were expected to be useful for recycling the excavated rocks as a concrete aggregate.

• 콘크리트학회지
• /
• 제10권5호
• /
• pp.167-176
• /
• 1998

골재의수요는 매년 크게 증가하고 있으나 천연골재는 점차 고갈되어 가고 있다. 따라서 기존석산들에서 발생되는 폐석자원을 쇄석골재로 활용하면 일거양득의 효과가 있다. 본 연구는 국내에서 가장 대규모 석산단지인 포천 및 익산지역 기존석산에서 발생되는 석산폐석에 대한 물리적, 화학적 및 광물학적 시험.분석을 실시하여, 쇄석골재로서 석산폐석의 특성규명과 활용가능성을 평가하였다. 연구결과, 포천과 익산지역에서 발생되는 석산폐석을 쇄석골재로 활용할 수 있을 것으로 판단되었으며, 폐석자원을 쇄석골재로 활용함으로써 골재의 수요에 보충하고, 산림 및 자연경관의 훼손과 환경오염을 야기할 수 있는 석산골재 신규개발의 억제에도 효과가 기대된다.