• 한국압력기기공학회 논문집
• /
• 제8권2호
• /
• pp.7-13
• /
• 2012

A spacer grid which is one of the most important structural components in a pressurized water reactor fuel is an interconnected array of slotted grid straps, welded at the intersections to form an egg-crate structure. The spacer grid is required to not only protect fuel rods stably but also have sufficient lateral crush strength for the sake of enabling shut-down of the nuclear reactor during abnormal operating environments. Then, the lateral crush strength of the spacer grid is closely related with welding quality of the spacer grid. Previous research on the crush strength analysis of the spacer grid had been performed using only parent material properties. In this study, to investigate the effect on the crush strength of the spacer grid when used mechanical properties in weld zone instead of parent material properties, crush strength analysis considering mechanical properties in weld zone obtained from the instrumented indentation technique was performed and compared the results with the previous research.

• 항공우주시스템공학회지
• /
• 제4권3호
• /
• pp.1-5
• /
• 2010

Understanding the crushing behaviour of aluminum honeycombs under dynamic loading is useful for crash simulations of vehicles and for design of impacting energy absorbers. In the study of honeycomb crushing under quasi-static, dynamic loading, the most important parameter is crush strength. Crush strength is indicated to energy absorption characteristic of aluminum honeycomb. In this study, Using Finite Element Analysis carried out crush strength of hexagonal aluminum honeycomb then the results was compared with Quasi-static test. Consequently, Crush strength is different in quasi-static loading and dynamic loading about 16%.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.935-943
• /
• 2012

철도차량에서 있어서 충돌 시 철도차량의 전두부가 운전자 및 승객의 공간을 침투하는 위험성을 항상 내포하고 있다. 이러한 위험성을 줄이기 위해서, 철도차량의 충돌에 관한 연구들이 전세계적으로 활발히 진행 중에 있다. 2010 년에 미국연방법규인 CFR (Code of Federal Regulations)은 단부 구조물 (end frame)의 구성요소인 충돌 기둥 및 모서리 기둥에 대한 압괴조건을 추가하여 개정되었다. 본 연구에서는 충돌 기둥에 대해서 CFR 법규에 명시된 조건에 대해서 압괴해석 및 압괴시험을 수행하였고, 법규에서 근본적으로 고려한 충돌체와의 충돌해석을 수행하여 그 결과들을 비교하였다. 이를 통하여, 단부 구조물의 압괴특성과 충돌특성을 파악하고 해석의 신뢰성을 검토하여 다양한 단부 구조물의 개발에 있어서 압괴해석의 유용성을 확인하는데 그 목적이 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.738-743
• /
• 2004

In this paper, the crush characteristic of the tilting train express M-car was estimated under a head-on collision scenario. The car body was divided into three parts - front, middle, and rear. For each part, crush-force relation was evaluated numerically using LS-DYNA 3-diementional shell element analysis. This result will be used for one-dimensional collision analysis of the full train rake.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.216-222
• /
• 1996

This paper presents a computational technique to predict roof crush resistance in early design stage of passenger car development. This technique use a simple F.E. model with nonlinear spring elements which represent plastic hinge behavior at weak areas. By assuming actual sections as equivalent simple sections, maximum bending moments which weak areas in major members can stand are theoretically calculated. Results from prediction of roof crush resistance are correlated well with test results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.318-318
• /
• 2009

The door stiffness is one of the important factors side impact. Generally, the researches have been conducted on the assembled door module. This study is to analysis the side impact characteristics for automotives door module. The impact characteristics have been determined by door module side impact test machine. To determine the initial, intermediate and peak crush resistances use the plot of load versus displacement and obtain the integral of the applied load with respect to the crush distances specified below for each door tested. The initial crush resistance is the average force required to deform the door through the initial 6 inches of crush. The intermediate crush resistance is the average force required to deform the door through the initial 12 inches of crush. The peak crush resistance will be directly obtained from the plot of load versus displacement since it is the largest force required to deform the door through the entire 18 inches crush distance. The data are used to determine if a specific vehicle or item of automotives equipment meets the minimum performance requirements of the subject Federal Motor Vehicle Safety Standard(FMVSS). FMVSS Static 214, Side impact protection, specifies performance requirements for protection of occupants in side impact crashes.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.119-127
• /
• 1998

Assuming that the static loaded square tube and the dynamic loaded one have no difference in their characteristics of the crush distance, the theoretical mean dynamic crush load was calculated with respect to the impact speed considering the strain rate sensitivity of the material. The ratio of dynamic to static mean crush load was predicted with previous results. The theoretical analysis was compared with the experimental results of aluminum square tubes axially loaded dynamically.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.181-188
• /
• 2000

This paper describes the energy absorption of a square tube under axi compression by using the finite element method. The overall deformations and lo buckling modes of tube was discussed by "plastic hinge concep Force-displacement function was plotted to show various state that depended or time. Also, mean crush load was expressed as a type of section geometry a material property using dimensional analysis. To verify the energy absorption and the effects of dimensions, The standards Wt used as related density and specific energy, mean crushing load and the resL were discussed by the relation between crush load and deformation, the relati between related density and specific energy, the relation between crush load a mean crush load, the relation between mean crush load and specific energy.ergy.

• 한국방재안전학회논문집
• /
• 제16권1호
• /
• pp.49-60
• /
• 2023

2022년 10월 29일 발생한 이태원 참사 이후 군중압박 사고로 인한 인명피해에 대한 관심이 높아졌으나 국내에서 군중압박과 관련된 학술적, 실제적 기반이 미약함이 지적되었다. 이에 본 연구에서는 군중압박과 관련된 용어와 개념을 조사하고 가능한 한글 용어 후보들을 제안하였으며, 국내외에서 발생한 대표적인 군중압박 사고 사례를 조사하여 정리하였다. 일부 대표적 사례를 기반으로 한 선진국의 접근법들을 조사하였고, 그 중 대표적으로 영상분석, 시뮬레이션 및 설문과 인터뷰 방법을 요약 도출하였다. 이를 통하여 군중압박 사고의 한글 용어 표준화와 개념 정립, 평가 및 접근 방법의 체계화가 이루어지기를 기대하고 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.590-592
• /
• 2008

A spacer grid is one of the most important structural components in a LWR nuclear fuel assembly. The primary considerations are to provide a Zircaloy spacer grid with crush strength sufficient to resist design basis loads, without significantly increasing pressure drop across the reactor core. In this study, the dynamic crush strength analysis and test are carried out for the specimens of a spacer grid assembly.