• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.247-252
• /
• 2008

Purpose: Passive eruption is characterized by the apical shift of the dentogingival junction. As this occurs, the length of the clinical crown increases as the epithelial attachment migrates apically. Altered passive eruption occurs when the margin of gingiva is malpositioned incisally on the anatomic crown in adulthood and results in excessive gingiva. The purpose of this article is to evaluate esthetic results of crown lengthening procedure in altered passive eruption.s. Materials and Methods: Three patients who complained "My front teeth look too short" were included. Bone sounding with periodontal probe revealed that alveolar bone crest was close to CEJ. Based on the diagnostic information, a diagnosis of altered passive eruption was made. They were performed apically positioned flap procedure with osseous resection. Results: Six months later, all patients achieved favorable esthetic results and gingival margins were healthy and stable. Conclusion: When the diagnostic procedures reveal alveolar bone crest levels approximating the CEJ, apically positioned flap procedure with osseous resection is indicated.

• The Journal of Advanced Prosthodontics
• /
• 제13권2호
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.

• Restorative Dentistry and Endodontics
• /
• 제36권1호
• /
• pp.59-65
• /
• 2011

연구목적: 본 연구의 목적은 서로 다른 기하학적 형태를 가진 3가지 Ni-Ti 파일, 즉 K3, NRT, Profle을 사용하여 레진 블록으로 제작된 만곡 근관에서의 apical transportation 양상 및 working length 변화를 서로 비교하는 것이다. 연구 재료 및 방법: 실험 방법은 30개의 레진 블록을 Schneider technque을 사용하여 만곡도 측정 후 각 group당 임의로 10개씩 배분하였다. 이를 각 Ni-Ti 파일을 사용하여 crown down technique으로 근관 성형하였다. 이의 분석을 위해 double radiograph superimposition method (Backman CA 1992)를 사용하고, 분석의 정확성과 일관성을 위해 특별히 고안된 jig, digital X-ray 및 apical transportation의 측정 시 CAD/CAM software를 이용하였다. Apical transportation 양은 '근단공-0.5 mm'부위로부터 0, 1, 3, 5 mm에서 측정 하였으며, working length 변화는 근관 성형 전후의 working length 변화를 측정하였다. 또 통계 처리는 각 group의 apical transportation 양과 working length 변화를 Kruskal-Wallis One Way Analysis로 분석 후 다중 비교는 Mann-Whitney U-test를 사용하였다. 결과: 각 group간 working lengh 변화 및 0, 1, 3 mm 부위에서의 apical transportation 측정 값 사이에는 유의할만한 차이가 관찰되지 않았으나(p = 0.924), 5 mm 부위에서는 K3와 Profile사이에 유의할 만한 차이가 있었다(p = 0.027). 결론: 서로 다른 기하학적인 형태를 가진 3가지 Ni-Ti 파일의 apical transportation 및 working length 변화 정도 평가시, 본 연구의 범위 내에서는 3가지 파일 모두 유의할 만한 차이를 보이지 않은 가운데 본래의 근관 형태를 잘 유지한다고 할 수 있다.

• 한국음향학회지
• /
• 제2권1호
• /
• pp.1-10
• /
• 1983

The presence of the sound tube and resonance cavity is unique in Korea Brahman Bells which is no examples in other country bells in the world. The sound tube erected in the crown is effective to emit the fundamental tone of the bell when the condition of resonant transmissibility is satisfied. The results of our analysis shows that the optimum length of the sound tube in the Bell Emile is 96cm but is not the present length, 77cm. The resonance cavity erected underneath the lip of the Bell Emile is found to be for the resonance of standing waves in the space including both bell cavity and resonance cavity and resonance cavity to the fundamental tone of the bell itself, in order that the strongest vibration can last long by least energy and lengthen the reverberation of the bell. Some historical remarks are also made on the magic flute, MANPASIKJUK, which was in existence in Shilla that can lull all evil waves, such as plagues, storms, droughts, famines and even enemies. The sound tube erected in the crown of the bell was originated in this magic flute. Finally, a strong proposal is advanced on the new national symbol of Korean traditional cultural assets. Indeed, it should be highly recommended that the Great King's Bell Emile would be the only real symbol of our national cultural assets by its own right of excellency and richness in every aspect of arts and sciences.

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.30-35
• /
• 2006

만곡근관에서 근관형성방법에 따른 근관작업장 변화를 평가하기 위하여 발거된 대구치의 협측 또는 근심 근관 40개에서 스테인레스-스틸 수동 파일 ($MANI^{(R)}$, 일본), 니켈-티타늄 수동 파일 (Naviflex $NT^{TM}$, 미국), ProFile, 또는 $ProTaper^{TM}$ (Dentsply-Maillefor, 스위스)를 사용하여 crown-down 방법으로 30번 크기까지 근관을 형성하고 근관형성 전후의 근관작업장 및 만곡도의 변화를 관찰하였다. 근단공에 대한 10-K파일 끝의 위치변화를 AutoCAD2000 (Autodesk 사, 미국)으로 측정하고 일원변량분석법 및 Tukey's studentized range test로 통계 분석하였다. 모든 군에서 근관형성후 근관장 및 만곡도가 유의하게 감소하였으며, 치관부 근관형성시 Gates Glidden bur를 사용한 수동파일 군이 ProFile 군보다 유의하게 많은 근관장 감소를 초래하였고, 치관부 및 근단부 전체 근관형성후에는 스테인레스 스틸 수동파일 군이 ProFile 군에서보다 유의하게 많은 근관장 감소를 나타내었다 (p<0.05).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.512-517
• /
• 1993

The cold rolled strip meets continuously rising demands on the less deviation of thickness at the width direction of their rolled products. Especially, the special interest has been to find the methods to reduce the edge drop which influences seriously on the yield losses and the quality of the rolled products. In this study, the influence of hot coils on the thickness profile of cold rolled strip was analyzed. For obtainint the tapered work roll shig\ft conditions, the thermal crown and the flattening between the work roll and the strip were calculated, and the main parameters which have mostly effects on the edge drop were simulated. Also the obtained conditions from the simulation were applied to Tandem Cold Rolling Mill to investigate the change of the edge drop and the crown ratio depending on the amount of work roll taper and the length of contact of taper. The results of the application led to better thickness profile than conventional one.

• 대한소아치과학회지
• /
• 제43권2호
• /
• pp.176-186
• /
• 2016

본 연구는 전치부 지르코니아 전장관을 위한 적정 치아 삭제량을 조사하기 위해 3차원 스캐너를 이용, 지르코니아와 다른 유치 전장관들의 크기와 형태를 분석하였다. 상악 좌측 유중절치, 유측절치 지르코니아 전장관과 금속관의 내/외면, 레진관의 외면을 스캔하여, 근원심경이 유사한 세 종류의 전장관을 한 군으로 만들어 분석하였다. 외면에서 모든 중절치, 1번 측절치 지르코니아 전장관이 같은 군의 전장관 중 가장 큰 순설경을 나타냈다. 내면에서 지르코니아 전장관은 금속관에 비해 근원심경 0.7-1.0 mm, 치관길이는 1 mm 가량 작았으며, 순설경은 중절치에서는 더 컸으나 측절치에서는 더 작았다. 비교결과, 지르코니아 전장관은 절단면 2.5-3.0mm, 근원심 1.5-2 mm, 순면 0.5-1 mm, 설면결절을 장축에 평행하게 삭제 후 측절치에서만 0.5 mm 설면삭제를 시행하는 것을 제안할 수 있다.

• Journal of Microbiology and Biotechnology
• /
• 제20권1호
• /
• pp.202-207
• /
• 2010

Plant growth promoting fungi (PGPF) are well known for the production of useful secondary metabolites. However, limited information is available on the gibberellin (GA) production capacity of PGPF of endophytic origin. In the current study, 15 fungal endophytes were isolated from the roots of Crown daisy, and then screened on Waito-c rice, in order to identify plant growth promoting fungi. The fungal isolate MH7 significantly increased the shoot length (12.1 cm) of Waito-c in comparison with control treatment (7.9 cm). In a separate experiment, the culture filtrate (CF) of MH7 significantly promoted the growth attributes of Crown daisy. The MH7 CF was analyzed for gibberellins and it contained all physiologically active gibberellins ($GA_1$, 1.37 ng/ml; $GA_3$, 5.88 ng/ml; $GA_4$, 8.62 ng/ml; and $GA_7$, 2.05 ng/ml) in conjunction with physiologically inactive $GA_9$ (0.83 ng/ml), $GA_{12}$ (0.44 ng/ml), $GA_{15}$ (0.74 ng/ml), $GA_{19}$ (1.16 ng/ml), and $GA_{20}$ (0.98 ng/ml). The CF of MH7 produced higher amounts of $GA_3$, $GA_4$, $GA_7$, $GA_9$, and $GA_{12}$ than wild-type Fusarium fujikuroi, which was used as a control for GA production. The fungal isolate MH7 was later identified as a new strain of Penicillium on the basis of its morphological characteristics and phylogenetic analysis of the 188 rDNA sequence.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.247-273
• /
• 1994

The purpose of this study was to evaluate the dental arch morphology and the occlusal characteristics in the Koreans from the dental-anthropological point of view. The sample consisted of dental stone casts obtained from 120 Korean adults and 142 Japanese adults. Japanese casts and Caucasian data had been preserved at the Dept, of Orthodontics of Tokyo Medical and Dental University. Tooth size and dental arch morphology of the Koreans were compared with that of the Japanese. On the other hand, the variations of 30 crown traits, categorized and quantitatively graded, were compared between two peoples and the frequency distribution of each crown traits were analyzed by means of Chi-square test. The results were summerized as followings ; 1. There was a significant sexual difference in dental arch length and width in the Korean, in which male had a longer and wider dental arch than female. There was a close resemblance for dental arch morphology between the Koreans and the Japanese, except for a little longer mandibular arch of the Japanese. 2. In general, Korean male had wider crown than female, particulary in central incisor,canine,1st molar of maxilla and canine, 1st and 2nd molar of mandible with significance. The Korean had wider maxillary first molar, smaller mandibular first and second molar than the Japanese in both sex. 3. In crown traits of the Korean, shovel-shaped incisor showed lower frequency distribution than in the Japanese, but higher than in the Caucasians. Frequency of incisor reduction was shown higher distribution than in the Japanese and the Caucasians. Carabelli's tubercle showed higher frequency distribution than in Japanese, but remarkably lower than in Caucasians.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.280-287
• /
• 2019

구강이라는 특수한 환경 속에서 치아는 평생을 거쳐 마모, 부식 등을 겪게 된다. 점진적이며 일정한 치아의 마모는 노화의 자연스러운 현상이나, 특정 요소에 의한 마모나 부식 등은 병적인 요소이며 교합면의 병리적 손상과 이에 따른 교합 부조화, 심미적 문제, 턱관절 장애 등을 야기할 수 있다. 본 증례는 26세의 젊은 여성 환자로 전반적인 치아의 마모와 부식이 동반된 상태였다. 디지털 안모 분석, 생리적 안정위, 전치부 치관 길이 평가 등을 통해 진단 납형을 제작하였다. 디지털 분석을 통해 치관연장술에 필요한 가이드를 제작하여 수술을 진행하였고 임시 보철물을 통하여 저작 기능 및 심미성을 회복하였다. 지르코니아 최종 보철로 수복하여 심미적, 기능적으로 만족할만한 결과를 얻었으므로 이 증례를 보고하고자 한다.