DOI QR코드

DOI QR Code

Three Dimensional Analysis of Primary Maxillary Central and Lateral Anterior Zirconia Crown

상악 유절치 지르코니아 전장관 수복을 위한 3차원 분석

  • Lee, Jungmin (Department of Pediatric Dentistry, School of Dentistry, Kyunghee University) ;
  • Lee, Hyoseol (Department of Pediatric Dentistry, School of Dentistry, Kyunghee University) ;
  • Nam, Okhyung (Department of Pediatric Dentistry, School of Dentistry, Kyunghee University) ;
  • Kim, Misun (Department of Pediatric Dentistry, School of Dentistry, Kyunghee University) ;
  • Choi, Sungchul (Department of Pediatric Dentistry, School of Dentistry, Kyunghee University)
  • 이정민 (경희대학교 치의학전문대학원 소아치과학교실) ;
  • 이효설 (경희대학교 치의학전문대학원 소아치과학교실) ;
  • 남옥형 (경희대학교 치의학전문대학원 소아치과학교실) ;
  • 김미선 (경희대학교 치의학전문대학원 소아치과학교실) ;
  • 최성철 (경희대학교 치의학전문대학원 소아치과학교실)
  • Received : 2015.10.01
  • Accepted : 2015.11.21
  • Published : 2016.05.31

Abstract

This study was performed to compare the shape and dimension of anterior zirconia crowns to other pediatric crowns using a three-dimensional scanner to investigate adequate amount of tooth preparation. Primary central and lateral anterior zirconia crowns, stainless steel crowns and celluloid strip crowns were scanned by a three-dimensional scanner. Outer and inner surfaces of zirconia and stainless steel crowns, and outer surface of celluloid strip crowns were analyzed. In outer scanned images, all sizes of central and lateral size 1 zirconia crown had the largest labiolingual diameter among the three crowns. In inner scanned images, zirconia crown's mesiodistal diameter was 0.7-1.0 mm smaller and crown length was approximately 1 mm shorter than those of stainless steel crowns. Zirconia crown's labiolingual diameter was larger in central crowns whereas it was smaller in lateral crowns than that of stainless steel crowns. Recommended preparation required for zirconia crown is incisal 2.5-3.0 mm, mesiodistal 1.5-2.0 mm, labial 0.5-1.0 mm. Cingulum should be trimmed parallel to the long axis. No more lingual reduction is needed in central incisors whereas additional 0.5 mm reduction is suggested in lateral incisors.

본 연구는 전치부 지르코니아 전장관을 위한 적정 치아 삭제량을 조사하기 위해 3차원 스캐너를 이용, 지르코니아와 다른 유치 전장관들의 크기와 형태를 분석하였다. 상악 좌측 유중절치, 유측절치 지르코니아 전장관과 금속관의 내/외면, 레진관의 외면을 스캔하여, 근원심경이 유사한 세 종류의 전장관을 한 군으로 만들어 분석하였다. 외면에서 모든 중절치, 1번 측절치 지르코니아 전장관이 같은 군의 전장관 중 가장 큰 순설경을 나타냈다. 내면에서 지르코니아 전장관은 금속관에 비해 근원심경 0.7-1.0 mm, 치관길이는 1 mm 가량 작았으며, 순설경은 중절치에서는 더 컸으나 측절치에서는 더 작았다. 비교결과, 지르코니아 전장관은 절단면 2.5-3.0mm, 근원심 1.5-2 mm, 순면 0.5-1 mm, 설면결절을 장축에 평행하게 삭제 후 측절치에서만 0.5 mm 설면삭제를 시행하는 것을 제안할 수 있다.

Keywords

References

  1. Oueis H, Atwan S, Pajtas B, Casamassimo PS : Use of anterior veneered stainless steel crowns by pediatric dentists. Pediatr Dent, 32:413-416, 2010.
  2. Ram D, Fuks AB : Clinical performance of resinbonded composite strip crowns in primary incisors: a retrospective study. Int J Paediatr Dent, 16:49-54, 2006. https://doi.org/10.1111/j.1365-263X.2006.00680.x
  3. Waggoner WF : Restoring Primary Anterior Teeth: Updated for 2014. Pediatr Dent, 37:163-85, 2015.
  4. Karaca S, Ozbay G, Kargul B : Primary zirconia crown restorations for children with early childhood caries. Acta Stomatol Croat, 47:64-71, 2013. https://doi.org/10.15644/asc47/1/6
  5. Miyazaki T, Nakamura T, Kobayashi T, et al. : Current status of zirconia restoration. J Prosthodont Res, 57:236-261, 2013. https://doi.org/10.1016/j.jpor.2013.09.001
  6. Anunmana C, Charoenchitt M, Asvanund C : Gap comparison between single crown and three-unit bridge zirconia substructures. J Adv Prosthodont, 6:253-258, 2014. https://doi.org/10.4047/jap.2014.6.4.253
  7. Korean Acad Pediatr Dent : Dentistry for the child and adolescent, 5th ed., YENANG INC, Seoul, 84, 389-392, 2014.
  8. Technical Guide Instructions for Use and General Information. Available from URL: http://www.nusmilecrowns.com/pdf/IFU-05_ZRTechnicalGuideEng.pdf (Accessed on July 10, 2015).
  9. Moorrees CF, Thomen SO, Jensen E, Yen PKJ : Mesiodistal crown diameters of deciduous and permanent teeth. J Dent Res, 36:39-47, 1957. https://doi.org/10.1177/00220345570360011501
  10. Lee JH, Hyun HK : Morpholgy of stainless steel crowns for the first primary molar using threedimensional scanner. Seoul National University, 2013.
  11. Lee JB, Kim CC, Hahn SH, Lee SH : A morphometric study of the maxillary primary first molars using three-dimensional scanner. Korean Acad Pediatr Dent, 33:643-652, 2006.
  12. Scanners overview. Available from URL: http://www.3shapedental.com/restoration/dental-lab/labscanners/d800/ (Accessed on October 20, 2015).
  13. Sousa MV, Vasconcelos EC, Pinzan A, et al. : Accuracy and reproducibility of 3-dimensional digital model measurements. Am J Orthod Dentofacial Orthop, 142:269-73, 2012. https://doi.org/10.1016/j.ajodo.2011.12.028
  14. Lee GT, Kim JH : Accuracy of digitized dental model made from white light scanner according to different scanning method. Korea University, 2013
  15. Baik BJ, Jeon SH, Kim JG, Kim YS : A study on the size of the deciduous teeth. J Korean Acad Pediatr Dent, 29:382-388, 2002.
  16. Han EO, Lee JH, Kim S, Jeong TS : A morphometric study on the preformed stainless steel crowns of some brands. J Korean Acad Pediatr Dent, 39:145-152, 2012. https://doi.org/10.5933/JKAPD.2012.39.2.145
  17. Dean JA, Avery DR, McDonald RE : McDonald and Avery's Dentistry for the Child and adolescent, 9th ed., Elsevier Inc., Missouri, 46, 2010.

Cited by

  1. Shear Bonding Strength of Three Cements Luted on Pediatric Zirconia Crowns and Dentin of Primary Teeth vol.45, pp.3, 2018, https://doi.org/10.5933/JKAPD.2018.45.3.314
  2. A Morphometric Study of Primary Anterior Zirconia Crowns in Korean Tooth Models vol.45, pp.1, 2018, https://doi.org/10.5933/JKAPD.2018.45.1.41