• 대한소아치과학회지
• /
• 제33권4호
• /
• pp.643-652
• /
• 2006

본 연구의 목적은 상악 제1유구치 치관의 크기와 형태적 특성을 3차원 스캐너를 미용하여 계측하고 국정 금속관과의 크기와 형태학적인 차이를 비교하는 것이다. 3차원 레이저 스캐너(Breuckmann opto Tep-HE100, INUS. Korea)로 스캔한 132aud 어린이들의 상악 제1유구치 경석고 모형을 Rapidform 2004 프로그램(INUS, Korea)을 이용하여 각 치아의 근원심경과 협설경, 교합면-치경부간 거리, 근원심경에 대한 협설경의 비율을 계측하고 평균치를 얻었으며, 남녀 상악 제1유구치의 평균적인 크기와 형태를 얻고 기성 금속관과 비교하여 다음과 같은 결과를 얻었다. 1. 상악 제1유구치 디관의 좌우측 크기에 있어서 유의한 차이를 보이지 않았다(p<0.05). 2. 상악 제1유구치 치관의 남녀간 크기에 있어서 남자의 치관 크기가 유의하게 더 큰 값을 보였고(p<0.05), 치관의 형태에 유의한 치이는 보이지 않았다(p>0.05). 3. 3차원 이미지로 상악 제1유구치를 재구성하여 나타낸 평균적인 남녀 상악 제1유구치의 크기는 3M의 기성 금속관과 비교 시, 남자는 기성 금속관의 4, 5번 사이, 여자는 기성 금속관의 4번과 유사하였고, 일성의 기성 금속관과 비교 시 기성 금속관의 근원심경이 커서 협설경을 기준으로 남자는 5번, 여자는 4번과 유사한 크기를 보였다. 4. 3M의 기성 금속관에 비해 재구성한 평균치의 치관 형태가 근심 설측 우각 부위, 원심 설측 우각 부위에서 더 풍융하였고, 협측 치은 융기의 치경부 1/3부위가 더 풍융한 양상을 보였으며, 남자의 치관보다 더 풍융한 양상을 보였다. 일성의 기성 금속관은 평균치의 치관 형태보다 정사각형의 형태를 나타냈고, 근원심경이 더 긴 양상을 나타냈다.하악 유견치의 치근 흡수의 완료는 하악 제 1 유구치 보다 빨랐으며, 하악 유견치에서 치근 흡수에 소요된 총 기간은 가장 짧았다. 5. 치근 흡수의 속도는 흡수 말기가 초기에 비해 빠른 경향을 나타냈다. 정확한 유치 치근의 흡수시기에 대해 알기 위해서는 정기적이면서 종적인 연구가 필요하리라 생각한다.ture model index(SMI), degree of anisotropy (DA)는 두 군 사이에 유의한 차이를 보이지 않았다(p>0.05). 4. 조직 절편을 관찰한 결과, 부드러운 사료를 먹인 실험군에서 하악 과두의 연골층의 증식 층과 전체 두께가 상당히 감소하였다.항성에 있어 유의한 차이를 보이지 않았다. 8379, 근심면 평균 0.8223, 설면 평균 0.7766, 원심면 평균 0.6781 순으로 나타났다. 4. 치아 우식증 진단율을 비교한 결과 교합면, 협면, 설면에서는 $DIFOTI^{TM}$ 이미지 판독이 가장 우수한 것으로 나타났으며(p<0.05), 근심면과 원심면에서는 방사선 판독이 가장 우수한 것으로 나타났다(p<0.05).는 P=0.009로 나타났다. 임상생징후 변화는 유의성이 없었다. 4. 종양환자의 검사치간의 시기별에 따른 상관관계를 조사한 결과 유의확률이 0.05 이하인 수치들은 Hb과 Albumin, K, Na간, Neutrophil과 Leukocyte간이었고 상관계 수치는 $0.370{\sim}0.442$ 사이로 나타났다. 유의확률 0.01이하로 조사된 수치는 Cholesterol과 ALT간, LDH와 Platelet, Creatinine간, Platelet와 BUN간, Na와 K수치간 이었으며 상관계수는 $0.531{\sim}0.866$사이로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.161-168
• /
• 1999

A series of centrifuge model tests were performed in order to investigate the behaviors of various tunnel linings. A 1/100-scaled aluminum and hydrostone horseshoe tunnel linings with a radius km, height km were buried in a depth of C/D=3 with dry Joomunjin standard sand, the relative density of which was 86%. Bending moments and thrusts along the tunnel circumference were measured by 12 strain gages. Earth pressures in soil and on lining were estimated by pressure transducers, ground surface settlements at center and edges by using LVDTs. Average Ko(coefficient of earth pressure at rest) was 0.39 for the model sand. The structural behaviors of lining depended on its damaged conditions. But, as a rule, on the crown, the tensile circumferential strain of lining occurred at the inner surface, and the compressive at the outer surface, then positive bending moment was created at the crown. The circumferential strain of the inner surface on the springline was tensile, and the outer compressive, so negative bending moment was measured at the springline. For hydrostone linings, cracks initiated at the inner surface on the crown, and the outer on the springline over average 40g.

• 대한치과교정학회지
• /
• 제44권6호
• /
• pp.294-303
• /
• 2014

Objective: The purpose of this study was to examine whether orthodontic treatment experience affects the individual's perception of smile esthetics and to evaluate differences among orthodontically treated laypersons, non-treated laypersons, and dentists by using computerized image alterations. Methods: A photograph of a woman's smile was digitally altered using a software image editing program. The alterations involved gingival margin height, crown width and length, incisal plane canting, and dental midline of the maxillary anterior teeth. Three groups of raters (orthodontically treated laypersons, non-treated laypersons, and dentists) evaluated the original and altered images using a visual analog scale. Results: The threshold for detecting changes in maxillary central incisor gingival margin height among laypersons was 1.5 mm; the threshold of dentists, who were more perceptive, was 1.0 mm. For maxillary lateral incisor crown width and height, the threshold of all three groups was 3.0 mm. Canting of the incisal plane was perceived when the canting was 3.0 mm among non-treated laypersons, 2.0 mm among treated laypersons, and 1.0 mm among dentists. Non-treated laypersons could not perceive dental midline shifts; however, treated laypersons and dentists perceived them when the shift was ${\geq}3.0mm$. Conclusions: Laypersons with and without orthodontic treatment experience and dentists have different perceptions of smile esthetics. Orthodontically treated laypersons were more critical than non-treated laypersons regarding incisal plane canting and dental midline shifts. Based on these findings, it is suggested that orthodontic treatment experience improved the esthetic perceptions of laypersons.

• 한국산림과학회지
• /
• 제106권2호
• /
• pp.258-266
• /
• 2017

본 연구의 목적은 국가산림자원조사 자료와 수치임상도를 활용하여 무주군 지역 리기다소나무림의 추정된 탄소 저장량에 대한 공간분포도를 작성하고자 하였다. 국가산림자원조사 자료를 이용하여 바이오매스 추정식을 개발하기 위해서 수고, 임령, 흉고직경, 수관밀도와의 상관관계를 분석한 결과, 수관밀도(0.74)인자가 가장 높은 양(+)의 상관성을 보였고, 다음으로는 수고(0.61)인자에서 높은 상관관계가 나타났다. 상관분석 결과를 기반으로 탄소 저장량 추정식을 도출한 후 수치임상도를 활용하여 추정된 탄소 저장량 공간지도를 작성하였다. 수관밀도와 수고를 적용하여 추정된 탄소 저장량을 산출한 결과, 평균 58.2 ton C/ha로 나타났으며 전북 무주지역 리기다소나무림의 지상부 총 탄소저장량은 430,963 C ton으로 추정되었다.

• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

• 대한치과재료학회지
• /
• 제45권4호
• /
• pp.287-300
• /
• 2018

본 연구의 목적은 3차원 스캐너를 이용하여 현재 시판중인 두 종류의 대구치용 기성금속관의 형태적 특성을 비교하는 것이며, 또한 crimping 후의 치경부측 형태 변화를 분석 후 비교하는 것이다. 3차원 스캐너를 이용하여 상, 하악 대구치용 기성금속관인 PO-96과 PERMACROWN의 크기, crown index, 치경부 수렴도를 계측하였다. 이후 기성금속관들은 crimping을 통하여 치경부 형태를 조정하였고 3차원 스캐너를 통해 다시 스캔을 시행한 후 형태적 변화를 분석하였다. 상악 기성금속관의 폭경은 PERMACROWN이 PO-96에 비해 협설로 더 컸고 근원심으로는 더 작았으며, 치경부의 근원심 형태는 더 볼록하였다. 하악에서는 PERMACROWN이 PO-96에 비해 폭경은 협설로 작고 근원심으로 컸으며, 치경부의 근원심, 협설측 모두 더 볼록한 형태를 보였다. 그리고 두 기성금속관 모두 crimping 이후 치경부 변연 둘레는 감소하였다. 두 기성금속관은 크기, 형태, 치경부 수렴도에서 형태학적 차이를 보였다. 두 대구치용 기성금속관 모두 치경부 형태가 부여되어있지만 더 나은 변연적합을 위해서는 추가적인 crimping이 필요하다.

• Journal of International Society for Simulation Surgery
• /
• 제4권1호
• /
• pp.13-16
• /
• 2017

Fibular free flap reconstruction is the flap of the choice in long-span mandibular bone reconstruction. The most common disadvantage of the fibular flap is short bone height to install dental implant. Double barrel fibular flap has been tried, however, bulky flap in the oral cavity hinder its use. Titanium reconstruction plate has been used simultaneously with the free fibular flap to stabilize occlusion and to fix the fibular flap. In this study, titanium reconstruction plate was fixed in the lower border of the mandible and the fibular free flap was fixed in the superior border of the titanium plate to improve implant-crown ratio. This new technique improved the longevity of the dental prosthodontics with dental implants.

• Journal of Forest and Environmental Science
• /
• 제16권1호
• /
• pp.34-41
• /
• 2000

솔잎혹파리 피해임지의 특성에 따른 수세변동을 구명하였다. 솔잎혹파리 피해도("심", "중", "경")별로 구분하여 수세를 조사한 결과 피해가 심한 지역의 수목은 수세가 현저하게 약화되었으며, 수목의 임분밀도("밀", "중", "소")별로 구분한 경우는 피해도와 관계없이 임분밀도가 낮은 임분에서 수목의 수세가 강하게 나타났다. 수목의 외형적 인자중 수관폭과, 흉고직경이 작은 개체에 비하여 큰 개체의 수세가 모든 임분에서 강하게 나타났다. 각 임분에서 전기저항치와 수관면적과의 관계는 피해도 "심" 임분에서는 수관면적이 $13.4m^2$ "중" 임분에서는 $10.9m^2$, "경" 임분에서는 $7.9m^2$로 피해가 심할수록 수관면적이 넓어야 임목이 생존할 가능성이 높은 전기저항치($15k{\Omega}$ 이하)가 나타나는 것으로 파악되었다.

• 구강회복응용과학지
• /
• 제20권2호
• /
• pp.135-141
• /
• 2004

Statement of problem: Arrangement and angulation of clinical crown is very important for esthetic restoration in the upper anterior dentition. However, there was no clinical criteria to mesial angulation of the crown for Korean. Purpose: This study was undertaken to estimate the mesial angulation of the crown of the anterior teeth and the Oh's E-triangle made of the inter-pupillary line and the mesial inclination lines of the canines. Material and Method: 270 portraits of Korean were used for this study. The mesial angulation of the upper anterior teeth and the relationship of the inter-pupillary line and the mesial inclination lines of the canines were measured with the tools of PhotoShop software on the scanned images. Results: The angulation between the clinical crowns having a same name in the upper anterior dentition were $3.6^{\circ}$ between the central incisors, $8.6^{\circ}$ between the lateral incisors, and $13.6^{\circ}$ between the canines. There was no significance according to occupation and gender( P > 0.05). The ratio of height to base line of Oh's E-triangle was 4.47. 81.6% of the subjects showed the mesial inclination line of the canine passed by mesial border area of pupil. Conclusion: These data for Korean would be useful clinically to give the esthetic arrangement and to make the contour of upper anterior teeth.

• Journal of Forest and Environmental Science
• /
• 제30권2호
• /
• pp.233-242
• /
• 2014

Estimating above-ground biomass is important in establishing an applicable methodology of Measurement, Reporting and Verification (MRV) System for Reducing Emissions from Deforestation and Forest Degradation-Plus (REDD+). We developed an estimation model of diameter at breast height (DBH) from IKONOS-2 image that led to above-ground biomass estimation (AGB). The IKONOS image was preprocessed with dark object subtraction and topographic effect correction prior to watershed segmentation for tree crown delineation. Compared to the field observation, the overall segmentation accuracy was 64%. Crown detection percent had a strong negative correlation to tree density. In addition, satellite-based crown area had the highest correlation with the field measured DBH. We then developed the DBH allometric model that explained 74% of the data variance. In average, the estimated DBH was very similar to the measured DBH as well as for AGB. Overall, this method can potentially be applied to estimate AGB over a relatively large and remote tropical forest in Northern Borneo.