• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.925-933
• /
• 2009

This research was carried out by analyzing a form and composition in baseball cap targeting 97 marketing products, and we have typified it by frequency analysis. We have carried out comparing and wearing test between comparative pattern and the most preferred three products of sports brand, fashion brand A, and fashion brand B (flex fit). And also, in order to provide basic indices for developing new pattern, we have carried out analysis of variance. 1. As a result of analyzing a form in baseball cap, the most general pattern type for crown is central cutting with six pieces. In a cap, a basic type with no decoration was the most general. In the size adjustment and decoration, belt type and embroidery type (front or side embroidery of the crown) was the most common, respectively. 2. As a result of comparing and analyzing six-piece typed crown pattern, the comparative pattern was the same and symmetric in size and form of three patterns in front, side, and back. However, the patterns of marketing products of three brands were different in size and form of three patterns in front, side, and back. The patterns of sports brand were the largest in crown height and width, thus it was good at providing activity and motion. The patterns of fashion brand A were the shortest in the crown length and well-curved in front pattern, so it was well-matched with head shape. The patterns of fashion brand B were well-described back side of head since its convex and long patterns in the back head. 3. As a result of wearing test by five-point Likert scale among brand, pattern of fashion brand B outperformed the others since it was well-matched with head shape. In the cap, pattern of fashion brand A is the most preferred which was 7.5 cm of length and 18cm of width.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.9-21
• /
• 1983

The structures of oak stands were studied in relation to their productivity. Three plots classified by the site quality following to altitude, were selected on the oak stand located at Naryongri Eunsanmyun Buyeogun. The site qualities of the stand studied were generally estimated to be moderate in respect to some soil physical and chemical properties. Quercus variabilis was dominant species in the vegetation composition of the stand studied. The crown densities of the stand were varied from 65.4% in plot I to 78.2% in plot III and the parts, occupied with oak trees, ranged from 44.4% in plot I to 65.9% in plot III in the density. In the contrast to crown density, the growing stocks of oak trees ranged from $3.937m^3$ in plot I (73.4% of plot total) to $2.075m^3$ in plot III (84.3% of plot total). The occupied ratios, measured by crown class, exhibited dissimilarity between crown projection area and volume, and also the ratios brought into different patterns by plot. Highly significant correlations were proved between crown projection areas and volumes of individual oak trees by plot, but not proved in the relations by crown class. The cumulative growth, current annual increment and mean annual increment displayed various patterns by plot and by crown class in the heights, D. B. H. s and volumes of oak trees. The maximum values of current annual increment of height were generally recorded in 10 to 20 years, earlier than those of D. B. H. The mean annual increment of height, D. B. H. and volume maintained similar levels after about 10 years and fluctuated irregularly. The crown projection area and volume following to thinning decreased in the order of the thinning methods of grade A < grade B < crown thinning$90m^3/ha$ in about 40 years in the productivity of volume of the oak stand studied.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.173-177
• /
• 2006

From the viewpoint of coastal hydrodynamics, one of the most important effects of global warming is a sea-level rise in coastal areas. In the present study, impacts on port facilities against sea-level rise were investigated. The sea-level rise causes the increase of the water depth, and it generates variations on the wave height, buoyancy, tidal system and nearshore current system and so on. The increase of water depth gives rise to the decrease of crown height of the structure and it causes increase of wave overtopping quantity. It may flood the port zone and its facilities, and may decrease harbor tranquility. It also leads to difficulties on navigation, mooring and loading/unloading at the port. Increase in water depth also causes increase of wave height in surf zone. This high wave makes structures unstable and may cause them to collapse during storm. In addition, increase in buoyant force due to sea-level rise also makes the gravity type structures unstable. Consequently, theses variations due to sea-level rise will cause functional deterioration of port facilities. In order to protect port facilities from the functional deterioration, reinforcement plan is required such as raising the crown height and increase in block weight and so on. Hence proper estimation method for the protection cost is necessary in order to protect port facilities efficiently. Moreover response strategies and integrated coastal zone management plan is required to maintain the function of port facilities. A simple estimation of cost for breakwaters in Korea was performed in the present study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.41-56
• /
• 2018

The purpose of this study was to provide clinical recommendations for restoration with selection of the most similar zirconia crown by 3-dimensional analysis of the shape of the maxillary primary central and lateral incisors in Korean individuals and prefabricated zirconia crowns. The average shape of the sound maxillary primary central and lateral incisors in 300 children was reproduced by 3-dimensional scanning. Zirconia crowns of 4 manufacturers (NuSmile $ZR^{(R)}$ Crown, Cheng $Crowns^{(R)}$, Kinder $Krowns^{(R)}$, and EZ $Pedo^{(R)}$ Crown) were scanned 3-dimensionally, and coordinates for comparison of the shape were measured to evaluate the similarity between the teeth and crowns. The most similar crowns were selected by comparing the mesiodistal length, crown height, crown shape ratio, distance between the same coordinates of a tooth and crown, the radius of curvature of the labial surface, and the volume. As a result of analysis, Cheng $Crowns^{(R)}$ size 3 and NuSmile $ZR^{(R)}$ Crown size 2 were the most similar crowns in the maxillary primary central and lateral incisors, respectively. Scanning the inner surface of the crowns and evaluating the amount of tooth reduction required suggested that an overall lesser amount of tooth reduction compared to that presented by the manufacturer's guidelines should be performed.

• Journal of Korean Society of Forest Science
• /
• v.8 no.1
• /
• pp.11-16
• /
• 1968

1. A Study was to delineate the correlation relationship growth factors, a) height and clear-length, b) height and circle of breast height, c) height and circle of ground height, d) height and crown length, of phyllostachys reticulata kock and phyllostachys edulis riv, 2. The formula applied to arrive at correlation coefficient according to correlation table, was $e=\frac{1-{\mu}^2}{\sqrt{\Sigma}X^2y^2}$ the formula for average error was $e=0.6745\frac{1-{\mu}^2}{\sqrt{n}}$ 3. The correlation coefficient and average error by each species were as three tables. 4. Area of the sample plot were 0.5~1 acres. 5. Height, clear-length, circle of breast height, circle of ground height and crown-length of bamboos were measured by weise hypsometer and pole.

• Journal of Periodontal and Implant Science
• /
• v.54 no.2
• /
• pp.108-121
• /
• 2024

Purpose: The aim of this study was to compare changes in soft and hard tissue and the histologic composition following early implant placement in sites with alveolar ridge preservation or spontaneous healing (SH), as well as implant performance up to 1 year after crown insertion. Methods: Thirty-five patients with either intact buccal bone plates or dehiscence of up to 50% following single-tooth extraction of incisors, canines, or premolars were included in the study. They were randomly assigned to undergo one of three procedures: deproteinized bovine bone mineral with 10% collagen (DBBM-C) covered by a collagen matrix (DBBM-C/CM), DBBM-C alone, or SH. At 8 weeks, implant placement was carried out, and cone-beam computed tomography scans and impressions were obtained for profilometric analysis. Patients were followed up after the final crown insertion and again at 1 year post-procedure. Results: Within the first 8 weeks following tooth extraction, the median height of the buccal soft tissue contour changed by -2.11 mm for the DBBM-C/CM group, -1.62 mm for the DBBM-C group, and -1.93 mm for the SH group. The corresponding height of the buccal mineralized tissue changed by -0.27 mm for the DBBM-C/CM group, -2.73 mm for the DBBM-C group, and -1.48 mm for the SH group. The median contour changes between crown insertion and 1 year were -0.19 mm in the DBBM-C/CM group, -0.09 mm in the DBBM-C group, and -0.29 mm in the SH group. Conclusions: Major vertical and horizontal ridge contour changes occurred, irrespective of the treatment modality, up to 8 weeks following tooth extraction. The DBBM-C/CM preserved more mineralized tissue throughout this period, despite a substantial reduction in the overall contour. All 3 protocols led to stable tissues for up to 1 year.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.135-142
• /
• 1998

The purpose of the present study was to evaluate the effect of incisor protrusion on the mucogingival parameters including the width of attached gingiva. Thirty-seven young adults with lower anterior crowding were selected for this study. From the study model, the degrees of relative and absolute protrusions were measured for each lower incisor. Clinical non height, the width of keratinized gingiva, probing depth and the width of attached gingiva were measured with digital vernier calipers and Florida Probe System. Through comparing the difference of the above measurements between protruded and non-protruded incisors, and correlation analysis between each measurement, following results were obtained: 1. The protruded incisor showed narrow width of keratinized and attached gingiva comparing to non-protruded incisor. 2. The protruded incisor showed greater clinical crown height comparing to non-protruded side while there was no difference in the probing depth between protruded and non-protruded side. 3. The difference in the width of attached gingiva between protruded and non-protruded incisors showed higher significance in the lateral incisor than in the central incisor. 4. The degree of relative protrusion showed higher correlation with the width of attached gingiva than the degree of absolute protrusion. 5. Clinical crown height showed higher correlation with the width of attached gingiva than the degree of protrusion.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.131-138
• /
• 2006

This study was conducted to assess the diameter growth patterns of Quercus mongolica and Quercus variabilis dominant species in natural deciduous forests in Korea. The diameter growth data were collected from 83 destructively sample trees for stem analysis in Gangwon-Do region. The relationship between diameter growth and 14 tree measurements was also analyzed. The average diameter growth rate of dominant trees for both species increased until ages of 15-20 years, and exhibited generally constant trend for subsequent ages. The diameter growth rate of both species ranged from 0.09-0.83 cm/yr across the all ages. Average annual diameter growth for last 5 measurement years was 0.28 cm/yr for Quercus mongolica and 0.27cm/yr for Quercus variabilis. The observed growth rate decreased with decreasing crown class. The difference between diameter growth rates for different crown classes was only statistically significant (p<0.0001) for Quercus mongolica. Pearson correlation coefficient between the diameter growth rate decreased with relative diameter (r=0.64), relative height (r=0.61), exposed crown area (r=0.58) and total crown area (r=0.56) for Quercus mongolica. For Quercus variabilis, Pearson correlation coefficient decreased with dbh (r=0.57), crown width (r=0.55), age (r=0.39), competition index (r=-0.39), and height (r=0.35).

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.195-204
• /
• 1999

To improve nut production and timber quality in a plantation, crown shape controls were suggested for Korean white pines (Pinus koraiensis) under age class III through the analyses of the crown shape controls for seed orchard trees in several species, of crown status of controlled and uncontrolled trees in a Korean white pine seed orchard, and of growth characteristics of plantation trees under age class III. For nut production from the small trees less than 8 m, modified leader type can be applied by cutting the central leader and all branches below 1 m and keeping 4~5 nodes with 3~4 whorled branches a node locating 1 m apart. Trees with a 4~8 m long trunk below the first living branch are shaped into trees for nut and timber production, which have a 4~8 m long knotless stem and a modified leader type crown with 4~5 nodes with 3~4 whorled branches a node at a distance of 1 m. Trees, showing the first living branch at or above 9 m from the surface, are pruned severely for timber production and result in a central leader type containing two fifths of the initial crown. It is advisable to remove the leader and the branches when collecting cones or after/during October to take advantage of easy labor and little resin while cutting. After stem cut, branches showing apical dominance are to be cut to control height when necessary. The removal of the uppermost node may be needed to control the crown shape several years after the initial stem-cut.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.64-75
• /
• 2019

The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns). The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown. The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor. The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns. Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.