• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.103-109
• /
• 1989

Bond strength between alloy and ceramic plays an important role in deciding the quaring the processing of metalceramic restorations. Now the author had an experiment on the measurement of bond strength differences accoding to the contents of recast alloy used during the processing of metal-ceramic restorations. In the experiment, Anusavice's Planar Interface Shear Bond Test was employed to determine the bond strength. Total 25 specimens were divided as 5 groups, that is, 5 specimens in a group respections : Group I (new alloy 100%) Group II (new 75%$\cdot$recast 25%), Group III (new 50%$\cdot$recast 50%), Group IV (new 25%$\cdot$recast 75%), Group V(recast 100%). All specimens examined micropically and respective strength values of the group specimens were checked simultaneously. The results were as follows, 1. In the analtsis of variance the result showed the significant differences of 1%(P<0.01) among the each group classifid according to the recast contents. 2. When the interfaces of specimens were examined with an electron microscope, the air bubble were evenly occurred in all the specimens, and the occurrence frequencies and the sizes of air bubble were different between Group I and Group III, especially marked different Group I and Croup V. 3. In respective verification of each group through T-test, between Group I and Group II, between Group I and Group III did not show significant differences. 4. There was significant difference between Group I and Group IV, between Group I and Group V as 1%(P<0.01). 5. In the Shear Bond Test of all the groups, Croup V showed the lowest value. Explanatoion of Figures Fig 1. Main fracture type of metal-porcelain interlace showed in group I, II, III from shear Bond Test resets. Fig 2. Main fracture type of metal-porcelain interface showed In group Ⅳ, Ⅴ form shear Bond Test resets. Air bubble and their size appeared around interface of metal-porcelain. Fig 3. Group I, Fig 4. Group II Fig 5. Group III, Fig 6. Group IV, Fig 7. Group V.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.3 s.45
• /
• pp.119-127
• /
• 2006

Detrital zircons in iron-bearing quartzite of the Seosan Croup from southeastern part of the Cyeonggi Hassif were analysed for SHRIHP U-Pb ages. Among 42 analyses, 38 data yield concordant ages (less tan 10 % discordancy), and they concentrated at 1781~1898 Ma (n=19), $1781{\sim}1898\;Ma(n=19),\;1935{\sim}1941\;Ma(n=4),\;1996\;Ma,\;2120\;Ma\;2403{\sim}2459\;Ma(n=5)$, 2661 Ma and 3198 Ma. The data indicate that sedimentation of iron-bearing quartzite should be after ca 1.78 Ga (the youngest detrital zircon age), and argue against some of conventional idea that iron-bearing quartzite of the Seosan Group might be correlated with the Archean iron-bearing quartzite in the North China Craton.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.528-537
• /
• 2003

This paper proposes a 3-PPR planar parallel manipulator, which consists of three active prismatic Joints, three passive prismatic joints, and three passive rotational joints. The analysis of the kinematics and the optimal design of the manipulator are also discussed. The proposed manipulator has the advantages of the closed type of direct kinematics and a void-free workspace with a convex type of borderline. For the kinematic analysis of the proposed manipulator, the direct kinematics, the inverse kinematics, and the inverse Jacobian of the manipulator are derived. After the rotational limits and the workspaces of the manipulator are investigated, the workspace of the manipulator is simulated. In addition, for the optimal design of the manipulator, the performance indices of the manipulator are investigated, and then an optimal design procedure Is carried out using Min-Max theory. Finally. one example using the optimal design is presented.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.4
• /
• pp.171-186
• /
• 1998

While one main stream of research in GDSS (Group Decision Support System) is to investigate how GDSS affects decision-making performances of groups according to task types, support features, meeting facilitation modes and meeting environments. little study h3s been done about how group characteristics affect group decision processes and outcomes depending upon GDSS is provided or not. So far, most GDSS research has considered group characteristics (e.g. personality homogeneity) as given and did not include it as control variables in experiments. Therefore, the objective of this study is to investigate how members of two different groups perceive the use of GDSS in group meetings through lab experiments. The two groups are homogeneous and heterogeneous groups in terms of members' personality mix. This research found that the effect of GDSS is a function of groups' personality homogeneity in regards of the satisfaction on decision process and the communication thoroughness. The support of GDSS and the group homogeneity are proved to influence participant's perception about some dependent variables such as satisfaction on decision process.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.1
• /
• pp.63-77
• /
• 2003

Group buying is one of the most popular transaction patterns on the internet at least in Korea. Nevertheless, it is hard to find academic researches for it in view of consumer behavior. In this paper, we analyze factors which determine consumer's attitude toward and intention of participation in Internet group buying by comparison of Internet individual one. For this purpose, we propose “lowering price”, “decreasing risk” and “reducing transaction cost” as relative advantages and "lack of product assortment" and "delay of time" as relative disadvantages over individual buying on the Internet. For empirical test, Internet users who have some experiences of individual buying but not group ones on the Internet are surveyed and analyzed. In result, a satisfying model fitness for structural equation model is derived and most hypotheses except the relationship between "decreasing risk" and "attitude toward Internet group buying" are accepted. Our results provide not only academic contribution by suggestion of a research framework but also practical insight by discussion of diverse features in Internet group buying.verse features in Internet group buying.

• Tribology and Lubricants
• /
• v.20 no.2
• /
• pp.58-67
• /
• 2004

In this study a general Galerkin FE lubrication analysis method for the compressible Reynolds equation in cylindrical coordinates is presented. Then, the method is applied for analyzing lubrication performances of spiral groove dry gas seals. The effects of toning and number of groove on performance indices are evaluated at low and high rotating speeds: 3,600 and 15,000 rpm. Results show that, for the primary design consideration performances such as the opening force and axial and angular stiffnesses, a negative or small coning and a large number of groove are preferred.

• Journal of Korean Home Economics Education Association
• /
• v.14 no.1
• /
• pp.75-86
• /
• 2002

The purpose of this study is to analyze the effect of Web-based small group discussion on the achievement and satisfaction in the practice-planning phase of Technology and Home Economy. The subject of this study consists of 68 students of a middle school. The 7r7up is divided into two subgroup. the Web-based discussion croup and the face-to-face discussion grouts. each of which has 34 students. The achievement is estimated by individual reports. practice plans and the overall evaluation sheets. To estimate the satisfaction of students. the test sheets were used. together with the interviews of sampled students from both group. The results show that there is a statistically significant difference in the performance of practice between the two groups with the significant level of 0.05(p<0.05). There is also some difference in the satisfaction between the two groups.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.26
• /
• pp.77-84
• /
• 1992

This paper constructs Croup Technology process-based learning curve model adjusted to a Group Technology environment which accounts for shared learning that occurs when multiple products utilize some of the same process steps. Through this constructed model, the estimated times and productivity of labor calculated by the Group Technology process-based learning curve model are compared with those generated by employing product-based 1 earning curve model. For sensitivity analysis of the model, the impact of learning rate and the ordered production quantity on the ratio differences between Group Technology process-based learning curve model and product-based learning curve model are examined. These results indicate the critical importance of employing Group Technology process-based learning curve model when a process spans multiple products.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.3
• /
• pp.463-470
• /
• 1995

Anthropological measurements concerning 29 items were made on 37 adult males aged from 20 to 60. Factor analysis was applied in all 36 items. The main results are as gallows 1. Neck girth and need base girth are smaller. in the elder croup than the gouger group. 2. These decrease occur in the frontal part of the neck. 3. Neck frontal width decreases with age, but side depth increases. 4. The back part of the body depth at the level of the shoulder increases with age. 5. For the factor analysis, the third factor is a factor of forms, the variations of which has a relation with age.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.1
• /
• pp.20-25
• /
• 2002

Electrical damages to critical parts in rotating machinery have caused many machinery failures and hours of costly downtime. The problem of shaft currents generated in non-electrical machines has puzzled both users and manufacturers of these machines. The main solution for preventing electromagnetic type damage is to demagnetize all of the machinery parts, however this is costly and time consuming. Therefore a thorough investigation into the causes and physical characteristics of electromagnetic shaft currents is needed. In this paper, the self excitation theory was developed far a simple model, an axial flux Faraday disk machine surrounded by a long solenoid. Experimental tests were conducted to investigate the physical characteristics on an electromagnetic self excitation rig. The theory showed that the directions of both the shaft rotation and the coil turns should be identical if self excitation is to occur. From the tests, the electromagnetic type shaft current had both AC and DC components occurred at all vibration frequencies. This could point to a way to detect small instabilities or natural frequency locations by monitoring shaft currents.