• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.24-31
• /
• 2003

In this research, we applied FT-IR spectroscopy to study the hydrolysis of the ester-crosslinking formed by various polycarboxylic acids on the cotton fabric. We observed the following; (1) the ester-crosslinking is less durable to hydrolysis than ether-crosslinking under all conditions; (2) the ester-crosslinking formed by polycarboxylic acids having more than three carboxyl groups, such as butanetetracarboxylic acid (BTCA), are substantially more durable to hydrolysis than the acids having two or three carboxyl groups, such as maleic and citric acid; (3) alkaline conditions drastically accelerate the hydrolysis of both urea- and ester-crosslinking; and (4) the ester-crosslinking formed by poly(maleic acid) is more resistant to hydrolysis at alkaline conditions than BTCA. (5) polycarboxylic acid molecules were removed from the fabric at same rate as the hydrolysis of the ester linkage. FT-IR spectroscopy has proved to be a useful analytical technique for evaluating the hydrolysis of the crosslinked cotton fabric.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1036-1043
• /
• 1994

The silane crosslinking method was applied for the crosslinking of polyethylene (PE). Crosslinking of PE was performed by, first grafting vinyltrimethoxysilane(VTMOS) to the main chain of PE using an extruder at $200{\sim}210^{\circ}C$, followed by exposure to three different silane crosslinking conditions (1. immersed in $80^{\circ}C$ water, 2. at $80^{\circ}C$ air forced convection oven, 3. exposed to air at room temperature ). The thermal characteristic changes of PE resins with respect to the silane crosslinking conditions were studied by measuring the crystalline melting temperature, density and crosslinking reaction rate. Because silane crosslinking was carried out at solid state, crystalline melting temperature, crystallinity, crystal growth rate, crosslinking reaction rate and the change in the density of silane crosslinked PE were affected by crosslinking condition and the type of base resin. The properties of silane crosslinked PE were different from those of Peroxide crosslinked PE which was crosslinked at the molten state. It was found, from the result of DSC analysis, that silane crosslinked linear low density polyethylene(LLDPE) crosslinked at room temperature had no secondary melting peak because the crosslinking reaction proceeds slowly as the crystalline grows. After crystallization, the melting point of PE was lowered by crystalline interruption of crosslinked site.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.131-136
• /
• 2009

The effect of the chemical structure of the peroxide crosslinking agent on the reactive crosslinking reaction of EVA was investigated and the physical properties of the crosslinked EVA were studied as well. It was found that peroxide with one peroxy group (perbutyl peroxide) is more effective than peroxides with two peroxy group (2,5 dimethyl 2,5 di(tert-butylperoxyl) hexane and 1,1-di(tert-buthylperoxy)-3,3,5-tri-methylcyclohexane) in melt reactive crosslinking reaction of EVA. The rate of crosslinking was increased by the use of crosslinking acceleration agent but the noticeable effect on degree of crosslinking was not found. Crosslinking caused the lowering of melt flow ability of EVA but mechanical properties were enhanced by the crosslinking of EVA.

• Journal of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.77-80
• /
• 1967

Radiolysis of polyacrylonitrile(PAN) has been studied. Parameters for crosslinking and scission induced by gamma-ray irradiation were obtained by means of sol-gel partitioning method. G-value of crosslinking in PAN ($\bar{M}n=6{\times}10^5$) was 0.038 and the gel dose 21.6 Mrad. The effects of irradiation on the thermal degradation rate in PAN was also studied. No appreciable changes in thermal degradation rate observed up to 81.8 Mrad of irradiation dose.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.4
• /
• pp.273-280
• /
• 1996

Chondroitin sulfate/gelatin microspheres containing dexamethasone 21-acetate were prepared by complex coacervation method and their release patterns were examined in vitro. Microspheres prepared with a small amount of crosslinking agent had smooth surface and few pores, but those with a large amount of crosslinking agent were more porous and less spherical. In vitro release patterns were varied by changing polymer/drug weight ratio and amount of crosslinking agent. The release rate of dexamethasone 21-acetate in the presence of collagenase was faster than that in the absence of collagenase. Anti-inflammatory effect of dexamethasone 21-acetate microspheres was more efficient than that of dexamethasone 21-acetate solution in carrageenan-induced arthritis in the rat. On the basis of the above results, we might expect the degradation and drug release rate of these microspheres to be regulated by the degree of crosslinking and the level of enzymes. In patients with severe rheumatoid arthritis who have high concentration of collagenase, more drug would be released from the microspheres. An intra-articular injection therapy of rheumatoid arthritis with desired release kinetics could be developed to enhance patient compliance and therapeutic index.

• Membrane Journal
• /
• v.18 no.2
• /
• pp.124-131
• /
• 2008

The biodegradable hyaluronic acid membranes cross-linked with lactide using the crosslinking agent, 1,3-butadiene diepoxide (BD), were prepared as a potential biocompatible material for tissue engineering. The degree of lactide and BD reaction of the crosslinked membrane was determined by the analysis of nuclear magnetic resonance spectroscopy 6% of growth inhibition was observed in case of high BD concentration but the value is low enough not to affect cell growth. As the crosslinking reaction temperature increased, elongation increased and swelling ratio decreased. The rate of degradation was found to increase with the crosslinking temperature. The drug release experiment showed that the transport of drug through the membrane decreased with the crosslinking temperature.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.274-280
• /
• 1998

Order of reaction, rate constant, activation energy for vulcanization reaction, crosslinking density, and elastic constant of the network produced by sulfur curing were investigated on the SBR/BR blends containing silica and carbon black under same cure system. The reaction order was shown to be first order regardless of filler types. The carbon black filled rubber compounds showed higher rate constant compared to silica filled compounds. But activation energy appeared to be same regardless of filler type and rubber blend ratio. The crosslinking density and elastic constant is higher in the carbon black filled compound compared to silica filled compounds because of strong interaction between rubber and carbon black. On the other hand, crosslinking density and elastic constant were decreased with increasing the butadine rubber content in rubber blends. From the comparison of combined sulfur content in the vulcanized rubber, sulfur content in the silica filled compound become constant 20min later after reaction initiates but sulfur content in the carbon black filled compound become constant 10min later after reaction starts. The silica compound has a longer induction time ($t_2$) and optimum cure time($t_{90}$) compared to those of the carbon black filled compound.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Elastomers and Composites
• /
• v.33 no.5
• /
• pp.315-323
• /
• 1998

The purpose of this study was to investigate the crosslinking density and reinforcement of rubber compounds with various carbon black loadings, cure systems and cure temperatures. Bound rubber content increased with volume fraction of carbon black in rubber compounds, but total crosslinking density decreased with increasing the bound rubber content. Rate constant of cure reaction was changed significantly by cure system and cure temperature, especially it showed strong dependence on the cure temperature. High activation energys of cure reaction were shown in the rubber compound with high loading of carbon black under EC system and in the rubber compound with low loading of carbon black under CC system. High total crosslinking density of vulcanized compounds appeared in the rubber compound with low loading of carbon black and CC system among cure systems. Typical change of total crosslinking density by EC system was not shown. The highest elastic constant by Mooney-Rivlin equation was shown in the rubber compound with low loading of carbon black and SEC system. Modulus increased as increasing the loading of carbon black in the rubber compounds and showed the order of SEC, CC, and EC system for cure system.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.301-309
• /
• 2021

Chitosan, natural organic polymer, has been applied in water treatment as adsorbent due to non-toxic for human being. The amino group as functional group, can interacts with cation and anion at the same time. The prepared chitosan bead (HCB) was crosslinked to increase chemical stability (HCB-G) and both HCB and HCB-G were prepared to increase physical strength by drying referred to DCB and DCB-G, respectively. The adsorption effect for crosslinking and drying for four types of chitosan bead was tested using pseudo fist order (PFO), pseudo second order (PSO), and intraparticle diffusion model (ID). Regardless of PFO and PSO, the order of K, rate constant, is as followed: HCB > HCB-G > DCB > DCB-G for Cu(II) and phosphate. Drying leading to contraction of bead significantly reduced adsorption rate due to reduce the porosity of chitosan. In addition, crosslingking also negatively effect on adsorption rate. When compared with Cu(II) using hydrogel bead, phosphate showed higher value than Cu(II) for PFO and PSO. The application of ID showed that both hydrogel beads (HCB and HCB-G) obtained a very low R² ranging to 0.37 to 0.81, while R² can be obtained to over 0.9 for DCB and DCB-G, indicting ID is appropriate for low adsorption rate.