• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.508-515
• /
• 2002

The effects of the crosslinking caused by irradiation dose, molecular weights of the foaming materials, and various foaming processes on the foam structure of the polypropylene (PP) were investigated. The maximum gel content of the PP was 48% when the sheet was irradiated with 3.2 Mrad. This high gel content improved the cell structures by providing high thermal stability. The increase of both the gel content and structural development were stopped at the irradiation dose exceeding 3.2 Mrad. The increase of the molecular weights served to help produce a foam with particularly fine and even cell structures, along with improved thermal stability as well.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.242-249
• /
• 1996

To improve pervaporation performance of water/ethanol mixtures, chitosan/poly(vinyl alcohol) blended and phosphorylated chitosan composite membranes were prepared. Chitosan/poly(vinyl alcohol) blends were prepared with various blend ratios and then crosslinked with glutaraldehyde by two methods. With increasing crosslinking agent content and crosslinking times separation factor increased and permeate flux decreased. Separation factor of the membrane which contains glutaraldehyde as a crosslinking agent was higher than that of the membrane surface crosslinked. Phosphorylated chitosan was prepared with various reaction times and composite membrane was prepared. As reaction times increased, the separation factor increased with high affinity for water.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.778-784
• /
• 2002

Chemical modification of a dextran film to improve its physical properties was carried out by addition of plasticizers and crosslinking agents. Moreover, low-temperature plasma treatment with acetylene gas was done. The dextran film showed high mechanical strength but was brittle and vulnerable to moisture. When plasticizer was added, it became very soft but with large reduction of mechanical strength. However, a flexible film with fairly high mechanical strength and water resistance was prepared when the film was crosslinked by adding crosslinking agent with or after the addition of plasticizer. Treatment with an acetylene plasma changed the dextran film surface from hydrophilic to hydrophobic with little influence on the bulk properties of the film.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.334-338
• /
• 2009

Trifunctional epoxy resin triglycidyl paraaminophenol (TGPAP)/$CaCO_3$ nanocomposites were prepared using the melt blending method. The effects of nano-$CaCO_3$ content on the thermal behaviors, such as cure behavior, glass transition temperature ($T_g$), thermal stability, and the coefficient of thermal extension (CTE), were investigated by several techniques. Differential scanning calorimetry (DSC) results indicated that the cure reaction of the TGPAP epoxy resin was accelerated with the addition of nano-$CaCO_3$. When the nano-$CaCO_3$ content was increased, the $T_g$ of the TGPAP/$CaCO_3$ nanocomposites did not obviously change, whereas the crosslinking density was linearly increased. The nanocomposites showed a higher thermal stability than that of the neat epoxy resin. This result could be attributed to the increased surface contact area between the nano-$CaCO_3$ particles and the epoxy matrix, as well as the high crosslinking density in the TGPAP/$CaCO_3$ nanocomposites. The CTE of the nanocomposites in the rubbery region was significantly decreased as the nano-$CaCO_3$ content was increased.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.191-195
• /
• 2004

Drug delivery systems that are based on pectin have been studied for colon specific delivery using the specific activity of colon microflora. The aim of this study was to design a novel method of manufacturing pectin microspheres without oils and surfactants and to investigate the potential use of the pectin microspheres as an oral colon-specific drug carrier. The pectin microspheres were successfully formed using the spray drying method and crosslinking with calcium chloride. From the crosslinked pectin microspheres, indomethacin (IND) release was more suppressed than its release from non-crosslinked microspheres. In a low pH (pH 1.4) environment, the pectin microspheres released IND at an amount of about 18${\pm}$2% of the total loaded weight for 24 h while the release rate of IND was stimulated at neutral pH (pH 7.4). IND release from the pectin microspheres was increased by the addition of pectinase. The results clearly demonstrate that the pectin microspheres that were prepared by the spray drying and crosslinking methods are potential carriers for colon-specific drug deliveries.

• The Korean Journal of Zoology
• /
• v.39 no.4
• /
• pp.393-399
• /
• 1996

A zero-Iength croessinking procedure for studying protein-protein interactlons in preinitiation complex has heen developed. Preinltiadon complexes were assembled with immobilized DNA templates coupled to metal beads. Pudfied complexes were dIrectly crosslinked by 1-ethyl-3.(3-dimethylaminopropyl)carbodlimide (EDC). The reaction was stopped by addition of $\beta$-mercaptoethanol, and the complexes were isolated from EDC immedIately. An appllcatlion of this method with a preinltlation complex assembled with TBP, TFIIB, and GAL4-AH demonstrated that ThP dIrectly interacts with GAL4-AH and TFIIB in the prelnitlatlon complex. However, croeslinked produd between GAL4-AH and ThilB was not observed. These resutts lndlcate that GAL4-AH does not stably Interact with TFIIB In the GAL4-AH-TFIIB-TBP-DNA prelnitlatlon complex.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.345-354
• /
• 2009

Sulfonated poly(ether sulfone)s (PESs) with a network structure were prepared by heat-induced crosslinking of the allyl-terminated telechelic sulfone polymers using a bisazide and their structure was analyzed by $^1H$ NMR. Having both uniform distribution of the hydrophilic conductive sites and controlled hydrophobic nature by minimized crosslinking, the crosslinked polymer (PES-60) membrane offered excellent proton conductivity at high temperature with a good thermal stability. In addition, selectivity of the crosslinked membrane (PES-60) was more than three times than that of Nafion$^{(R)}$.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.373-382
• /
• 2006

A series of crosslinkable, waterborne polyurethanes (I-WBPUs) were prepared by in-situ polymerization using isophorone diisocyanate (IPDI)/poly(tetramethylene oxide) glycol (PTMG, $M_n$=2,000)/dimethylol propionic acid (DMPA)/ethylene diamine (EDA)/triethylamine (TEA)/aminoplast[hexakis(methoxymethyl)melamine (HMMM)] as a crosslinking agent. Typical crosslinkable, waterborne polyurethanes (B-WBPUs) blended from WBPU dispersion and aqueous HMMM solution was also prepared to compare with the I-WBPUs. The crosslinking reaction between WBPU and HMMM was verified using FTIR and XPS analysis. The effect of the HMMM contents on the dynamic mechanical thermal, thermal, mechanical, and adhesion properties of the I-WBPU and B-WBPU films were investigated. The storage modulus(E'), glass transition temperatures of the soft segment ($T_{gs}$) and the amorphous regions of higher order ($T_{gh}$), melting temperature ($T_m$), integral procedural decomposition temperature (IPDT), residual weight, $T_{10%}$ and $T_{50%}$ (the temperature where 10 and 50% weight loss occurred), tensile strength, initial modulus, hardness, and adhesive strength of both I-WBPU and B-WBPU systems increased with increasing HMMM content. However, these properties of the I-WBPU system were higher than those of the B-WBPU system at the same HMMM content. These results confirmed the in-situ polymerization used in this study to be a more effective method to improve the properties of the WBPU materials compared to the simple blending process.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.184-190
• /
• 2020

In the wet master batch process, process oil is used to improve the workability of silica-SBR. The process oil expands the polymer and provides lubrication to soften the stiff rubber chain. However, addition of excess process oil can interfere in the crosslinking reaction between rubber molecules and reduce the crosslinking density of silica-SBR. Controlling the amount of process oil is an important aspect for properly controlling the workability and crosslinking density of silica-SBR. In this study, silica-SBR was prepared by adjusting the amount of process oil to confirm its effect on silicaSBR. Vulcanization characteristics of silica-SBR were examined using a moving die rheometer. Dynamic viscoelasticity was measured using a dynamic mechanical thermal analyzer, and the mechanical properties were investigated using the universal testing machine according to ASTM D412. As a result, all silica-SBR compounds with 10 to 40 phr of process oil have effects of improving the processability and the silica dispersibility. Also, the optimum condition was determined when 10 phr of processed oil was added because the abrasion resistance was improved 65% compared to that at 40 phr.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.352-359
• /
• 2004

Membrane technology was used for the optical resolution of the various racemic compounds such as tryptophan, tyrosine and phenylalanine, using enantioselective membranes prepared from sodium alginate (SA) and glutaraldehyde as a membrane material and crosslinking agent, respectively, The chemical structure of the membranes was characterized with FT-IR spectrophotometry and 3D molecular structure modeling study was done to figure out the optical resolution mechanism through the membrane. Effects of degree of crosslinking, feed concentration, operating pressure and different kinds of feed solution on the membrane performances were studied. As results, it was found that with increasing degree of crosslinking and membrane thickness, and decrease in the concentration of the feed solution and smaller size of solutes, the enantinselectivity of the membrane was improved. When the sodium alginate membranes with 80% of swelling index and 79${\mu}{\textrm}{m}$ of thickness were used, 77% of enantiomeric excess was obtained.