• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.459-466
• /
• 2001

As the Public use part of the railway and the road, the railway crossing is important to work properly by two transportation means. Also, It is important to provide the good face of friction on the railway crossing in aspect of protecting the railway crossing accident. Lately, the material of railway crossing panel is the wood, the asphalt, and the steel. As they have a various fault, it was studied to analyze the structural action of the new material, rubber panel. This paper analyzed eigenvalue, stress and displacement by truck passing weight, thermal stress and train moving weight, using the FEM model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.998-1002
• /
• 2004

As the public use part of the railway and the road, the railway crossing is important to work properly by two transportation means. Also, It is important to provide the good face of friction on the railway crossing in aspect of protecting the railway crossing accident. Lately, Many kinds of the material are used for railway crossing panel. As they have a various fault, it was studied to analyze the structural action of the new material, rubber panel. This paper analyzed stress and displacement by truck passing weight using the Finite Element Modeling.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1813-1819
• /
• 2013

Existing level crossing obstacle detecting system was installed using a laser beam. Level crossing obstacle detecting system using a laser beam that has been a problem in relation to safety and maintainability failure according to weather conditions. We proposed laser radar level crossing obstacle detecting system as a way to overcome problem, and we developed an algorithm for this. Level crossing obstacle detecting system using a laser radar sensor algorithm is robust to external environment and a shadow zone does not exist. Sensor part of the laser radar level crossing obstacle detecting system of these is made up by the image processing unit and laser radar sensor, it operations by receiving train entering information from the control unit. In this paper, we proposed a detecting algorithm with calculation of the size of the laser radar sensor. Based on this, we were performance test on the basis of the scenario by making a prototype. In the future, laser radar level crossing obstacle detecting system to ensure the safety and reliability through the field test.

• Journal of the Korean Society for Railway
• /
• v.5 no.2
• /
• pp.125-132
• /
• 2002

As the public use part of the railway and the road, the railway crossing is important to work properly by two transportation means. Also, It is important to provide the good face of friction on the railway crossing in aspect of protecting the railway crossing accident. Lately, the material of railway crossing panel is the wood, the asphalt, and the steel. As they have a various fault, it was studied to analyze the structural action of the new material, rubber panel. This paper analyzed eigenvalue, stress and displacement by truck passing weight, thermal stress and train moving weight, using the Finite Element Method model

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2011

When a vehicle passes through a turnout, it is necessary for the changes in lateral force to be minimized to ensure the safe running of the vehicle. Therefore, the analysis of the interaction between the vehicle and the turnout is crucial for estimating the lateral force and the derailment coefficient on the turnout. In this paper, the effect of the variation of section shape on the running safety of a vehicle was investigated by changing the shape of the point part and the crossing part. The tongue rail length of the point part and nose rail height of the crossing part of an F10/F12 turnout were changed, and the running safety of the vehicle was analyzed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1553-1556
• /
• 2003

As the public use part of the railway and the road, the railway crossing is important to work properly by two transportation means. Also, It is important to provide the good face of friction on the railway crossing in aspect of protecting the railway crossing accident. Lately, the material of railway crossing panel is the wood. the asphalt, and the steel. As they have a various fault, it was studied to analyze the structural action of the new material. rubber panel. This paper analyzed eigenvalue, stress and displacement by truck passing weight and thermal stress using the FEM model.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.407-413
• /
• 2006

Railways are very important to get stability of railway structure as transportation system carrying a lot of passengers and freight. These days the construction of underground railway crossing such as expansion of new roads, construction of subway and gas pipe is increasing because of economic and social development. But these kinds of construction didn't take into account Cost-benefit analysis of railway which has the most important aspects of railway safety, so the results of construction didn't get a good evaluation. This study adapt Cost-benefit analysis to evaluate the economic validity of underground railway crossing. This study adjust about Cost-benefit analysis of railway part, and analyze the new method and technology of underground railway crossing constructed by Korean National Railroad and Railway Network Authority. Also this study divide between high frequency line and low frequency lineusing B/C, NPV, and IRR analysis. After analysis, B/C ratio method is the most suitable method among B/C, NPV, and IRR analysis method. Therefore this study can express economic benefit quantitatively and decrease the cost by adapting Cost-benefit analysis, and can clearly express the construction feasibility and investment effects of construction of underground railway crossing method.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.61-66
• /
• 2008

In railroad operation, turnout is the device designed to provide very critical functions of moving the train to the neighboring rail. It's the only movable section among the rail and track equipment, which has a complicated structure and as rapid movement between the wheel and rail during operation is unavoidable, the safety and the vibration caused by the impact load of the passing train becomes always the major concern. Response to rail vibration tends to vary depending on physical properties of the rail, rail base and the ground, making it difficult to estimate the quantitative outcome through the measurement. Thus, experimental or empirical approach, rather than an analytic method, has been more commonly employed to deal with the ground vibration. To predict the vibration of the turnout, an experimental value and the measured values are applied in parallel to the factors with a high degree of uncertainty. This study hence was intended to compare and analyze the vibration values measured at the crossing part of manganese turnout by type of train and turnout and distance, as well as predict the intensity of vibration generated at the crossing part of manganese turnout when tilting train accelerates.

• Hwankyungkyoyuk
• /
• v.24 no.4
• /
• pp.94-110
• /
• 2011

The main objective of this study was to find participant's recognition about and meaning of stream trekking activities by analyzing their reports after visiting Gumgang, which was a kind of field experience combined with environmental education programs. In addition, this work suggested a few points that might help improve trekking programs, trail establishment and the overall field activities along the river. Eighty reports were collected from the participants who had joined in the Gumgang trekking programs organized by both Green Korea United in Daejeon and Gumgang Basin Environmental Office of Korean EPA. A database of texts in the reports was created for the preliminary analysis and then the results were further examined in a qualitative methodology. The results of qualitative analysis demonstrated that before experiencing the trekking activities in the Gumgang, many participants seemed uninterested in a river itself, objectified it, or simply recognized functional roles. It is found that most participants preferred crossing rapids to other activities. Crossing rapids has the eleven positive aspects as follows. First of all, crossing rapids is fun and scary experience at the same time. Secondly, it is painful, but makes people feel happy ironically. Third, rapids themselves make people reminisce about their childhood and feel freedom. Fourth, they make people feel comfortable. Fifth, crossing rapids is addictive. Sixth, rapids have life. Seventh, people can learn how to adapt to nature through the experience in them. Eighth, they can make people cooperate. Ninth, they can make people recollect their old friends. Tenth, people can extend their experience near rapids to rivers. Eleventh, they can make people reflect themselves. There ere three remarkable findings about experience in rapids. Crossing rapids was an activity that most participants preferred and could make the goal of trekking in the Gumgang effectively achievable. By crossing rapids participants can understand both lively and painful parts of the river. Participants think tour guide was an essential part to trekking along the Gumgang.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.143-148
• /
• 2020

In the case of a system that detects and controls the phase of an alternating voltage, the analog control method compensates the phase offset part by filtering for the detected phase and applies it to the control. However, in the digital control method, precise control cannot be achieved due to an error between the operating frequency of the microprocessor or the microcontroller and the input phase time when controlled using such phase detection. In general, when the method used is a certain time, the accumulated error is compensated and adjusted at random. To solve this problem, a method of detecting a zero point in real time and compensating for the operating frequency of the microprocessor is needed. Therefore, the research to be performed in this paper to reduce these errors and apply them to precise digital control is as follows. 1) Research on how to implement Zero Crossing Detection algorithm through simulation modeling to compensate the zero point to match the operating frequency through detection. 2) A study on the method of detecting zero points in real time through the Zero Crossing Detection design using a microcontroller and compensating for the operating frequency of the microprocessor. 3) A study on the estimation of the rotor position of BLDC motors using the Zero Crossing Detection circuit.