• The Journal of Korean Academic Society of Nursing Education
• /
• v.29 no.1
• /
• pp.51-59
• /
• 2023

Purpose: This descriptive cross-sectional study aimed to examine the influence of nurses' moral sensitivity and ethical values on their biomedical ethics awareness. Methods: The study participants included 140 registered nurses working at three hospitals in Jeollabuk-do Province over six months. The data were collected from June 22 to July 3, 2020, and were analyzed using descriptive statistics, an independent t-test, one-way ANOVA, Pearson correlation coefficients, and stepwise multiple regression analysis with the IBM SPSS/WIN 20.0 program. Results: As a result of an analysis using stepwise multiple regression, nurses' biomedical ethics awareness was found to be significantly influenced by ethical values (β=.36, p<.001), moral sensitivity (β=.21, p=.007), and education in biomedical ethics (β=.16, p=.042) (adjusted R²=.21, p<.001). Conclusion: These findings suggest that moral sensitivity and ethical values are key factors in hospital nurses' development of biomedical ethics. Furthermore, the devising and implementing of a practical education program based on practical cases in medical situations to enhance nurses' biomedical ethics awareness is needed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.493-500
• /
• 2019

In this study, sensitivity analysis of sediment transport scaling factors in Delft3D-Morphology was performed to examine the effect those parameters on simulation results of cross-shore profile changes. For numerical experiments, one-year wave time series data which were observed in 2018 on the Maengbang coast in Gangwon prefecture were applied as external force. Bathymetric data observed in January and October of the same year were used as initial bathymetric data and annual bathymetric change data, respectively. The simulation performance of the model was evaluated based on the Brier Skill Score index for each part by dividing an arbitrary cross section within the calculation domain into the onshore and offshore parts. As a result, it was found thet the f_BED variable has a slight effect on the simulation results. The f_BEDW and f_SUSW variables show good simulation performance in onshore part when the value less than 0.5 is applied and vice versa. Among the experimental conditions, the optimal combinations of variables are f_BED = 1.0, f_BEDW = 1.0, f_SUSW = 0.1 for the onshore region and f_BED = 1.0, f_BEDW = 1.0, f_SUSW = 0.5 for the offshore region. However, since these combinations were derived based on the observation data on Maengbang beach in 2018, users should be careful when applying those results to other areas.

• The Korean Journal of Pain
• /
• v.34 no.2
• /
• pp.229-233
• /
• 2021

Background: Iliotibial band friction syndrome (ITBFS) is a common disorder of the lateral knee. Previous research has reported that the iliotibial band (ITB) thickness (ITBT) is correlated with ITBFS, and ITBT has been considered to be a key morphologic parameter of ITBFS. However, the thickness is different from inflammatory hypertrophy. Thus, we made the ITB cross-sectional area (ITBCSA) a new morphological parameter to assess ITBFS. Methods: Forty-three patients with ITBFS group and from 43 normal group who underwent T1W magnetic resonance imaging were enrolled. The ITBCSA was measured as the cross-sectional area of the ITB that was most hypertrophied in the magnetic resonance axial images. The ITBT was measured as the thickest site of ITB. Results: The mean ITBCSA was 25.24 ± 6.59 ㎟ in the normal group and 38.75 ± 9.11 ㎟ in the ITBFS group. The mean ITBT was 1.94 ± 0.41 mm in the normal group and 2.62 ± 0.46 mm in the ITBFS group. Patients in ITBFS group had significantly higher ITBCSA (P < 0.001) and ITBT (P < 0.001) than the normal group. A receiver operator characteristic curve analysis demonstrated that the best cut-off value of the ITBT was 2.29 mm, with 76.7% sensitivity, 79.1% specificity, and area under the curve (AUC) 0.88. The optimal cut-off score of the ITBCSA was 30.66 ㎟, with 79.1% sensitivity, 79.1% specificity, and AUC 0.87. Conclusions: ITBCSA is a new and sensitive morphological parameter for diagnosing ITBFS, and may even be more accurate than ITBT.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.3
• /
• pp.325-329
• /
• 2005

Objectives : This study was performed to assess the association between high sensitivity C-Reactive Protein (hsCRP) and hypertension. Methods : We evaluated the relationship between hsCRP with hypertension and other cardiovascular risk factors, using a cross-sectional survey of 202 people over the age of 50, living in a rural area. A logistic regression analysis was used to study the association between hsCRP and hypertension. The hsCRP levels were divided in quartiles, and the odds ratios (OR), with 95% confidence intervals (95% CI), calculated, using the lowest quartile as a reference. Results : The subjects consisted of 37.1% men and 62.9% women, with a mean (SD) hsCRP level of $1.9({\pm}3.0mg/{\ell})$ . The overall prevalence of hypertension was 61.4%. The prevalence of hypertension according to the hsCRP quartile was not statistically significant. After adjustment for confounding variables, the prevalence of hypertension according to the subjects in the 2nd, 3rd and 4th hsCRP quartiles were 1.418 (95% CI=0.554-3.628), 1.124 (95% CI=0.392-3.214) and 0.892 (95% CI=0.312-2.547) times higher, respectively, compared to those in the 1st quartile. Conclusions : The results showed that the level of hsCRP was not a risk factor for hypertension among adults aged over 50 years, living in a rural area. A further study should be performed to find the association between hsCRP and hypertension.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.120-126
• /
• 2002

The analytical performance of four commercially-available pneumatic nebulizers(Meinhard, Cross-flow, Babington, ESI PFA) was evaluated using inductively coupled plasma-atomic emission spectrometry (ICP-AES) and ICP-mass spectrometry (ICP-MS) instruments. The performance of an inert concentric nebulizer and a modified conespray nebulizer, made in Korea Research Institute of Standards and Science (KRISS), is compared with that of the four commercial nebulizers. Variation of sample introduction efficiency was investigated as carrier argon pressure and sample uptake rate were changed. Variation of sensitivity, signal stability, blank intensity and oxide/hydride ratios were also studied when the nebulizers were connected to the ICP-MS and ICP-AES instruments. It was found that good analytical result such as high sensitivity, low blank, stable signal and so on can be obtained with judicious selection of the nebulizer depending on the type of sample, sample amount, type of analytical instrument and analyte.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.523-531
• /
• 2022

In order to study the sensitivity and the uncertainty of the Moroccan research reactor TRIGA Mark II, a model of this reactor has been developed in our ERSN laboratory for use with the N-Particle MCNP Monte Carlo transport codes (version 6). In this article, the sensitivities of the effective multiplication factor of this reactor are evaluated using the ENDF/B-VII.0, ENDF/B-VII.1 and JENDL-4.0 libraries and in 44 energy groups, for the cross sections of the fuel (U-235 and U-238) and the moderator (H-1 and O-16). However, the quantification of the uncertainty of the nuclear data is performed using the nuclear code NJOY99 for the generation and processing of covariance matrices. On the one hand, the highest uncertainty deviations, calculated using the ENDFB-VII.1 and JENDL4.0 evaluations, are 2275, 386 and 330 pcm respectively for the reactions U₂₃₅(n, f), $ U_{235}(n\bar{\nu})$ and H₁(n, γ). On the other hand, these differences are very small for the neutron reactions of O-16 and U-238. Regarding the neutron spectra, in CT-mid plane, they are very close for the three evaluations (ENDF/B-VII.0, ENDF/B-VII.1 and JENDL-4.0). These spectra present two peaks (thermal and fission) around the energies 0.05 eV and 1 MeV.

• Computers and Concrete
• /
• v.31 no.3
• /
• pp.253-265
• /
• 2023

In this research, the gene expression programming (GEP) technique was employed to provide a new model for predicting the maximum loading capacity of concrete-encased steel (CES) columns. This model was developed based on 96 CES column specimens available in the literature. The six main parameters used in the model were the compressive strength of concrete (f_c), yield stress of structural steel (f_ys), yield stress of steel rebar (f_yr), and cross-sectional areas of concrete, structural steel, and steel rebar (A_c, A_s and A_r respectively). The performance of the prediction model for the ultimate load-carrying capacity was investigated using different statistical indicators such as root mean square error (RMSE), correlation coefficient (R), mean absolute error (MAE), and relative square error (RSE), the corresponding values of which for the proposed model were 620.28, 0.99, 411.8, and 0.01, respectively. Here, the predictions of the model and those of available codes including ACI ITG, AS 3600, CSA-A23, EN 1994, JGJ 138, and NZS 3101 were compared for further model assessment. The obtained results showed that the proposed model had the highest correlation with the experimental data and the lowest error. In addition, to see if the developed model matched engineering realities and corresponded to the previously developed models, a parametric study and sensitivity analysis were carried out. The sensitivity analysis results indicated that the concrete cross-sectional area (A_c) has the greatest effect on the model, while parameter (f_yr) has a negligible effect.

• The Plant Pathology Journal
• /
• v.25 no.1
• /
• pp.13-20
• /
• 2009

Ninety isolates of Colletotrichum species from new persimmon tree twigs and 50 isolates from pepper plant fruits were isolated via single-spore isolation. Of the 140 isolates, 26 were examined for mycelial growth, carbendazim sensitivity, and ITS sequence. Four of the isolates from the persimmon trees, which were cultivated exclusively in an orchard, showed fast mycelial growth and sensitivity to carbendazim, while five of the pepper isolates showed slower mycelial growth and were resistant to the fungicide. However, 17 isolates from persimmon trees cultivated with pepper plants in the same orchard showed slow mycelial growth like the pepper isolates and they were sensitive to carbendazim like the persimmon isolates. ITS sequence analysis of these 27 isolates led to the identification of the 22 persimmon isolates as C. gloeosporioides and the five pepper isolates as C. acutatum. PCR with species-specific primers confirmed that the 90 isolates from persimmon were C. gloeosporioides whereas the 50 isolates from pepper were C. acutatum. The 90 persimmon isolates of C. gloeosporioides and 50 pepper isolates of C. acutatum were compared by a wound inoculation test to determine their capacity for host cross-infection. All of the C. acutatum isolates from pepper caused typical symptoms of anthracnose on the fruits of pepper plants and twigs of persimmon; they differed from the C. gloeosporioides isolates from persimmon, more than 90% of which were able to infect only persimmon. Amplified fragment length polymorphism analysis revealed the existence of two groups (C. gloeosporioides and C. acutatum isolates group). At 80% genetic similarity, the C. gloeosporioides group was defined within four clusters, while the C. acutatum group was within three clusters. However, these clusterings were unrelated with the virulence of Colletotrichum species against pepper fruits.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.375-381
• /
• 2023

Purpose: This study assessed the diagnostic performance of stitched and non-stitched cross-sectional cone-beam computed tomography (CBCT) images of non-displaced ovine mandibular fractures. Materials and Methods: In this ex vivo study, non-displaced fractures were artificially created in 10 ovine mandibles (20 hemi-mandibles) using a hammer. The control group comprised 8 hemi-mandibles. The non-displaced fracture lines were oblique or vertical, <0.5 mm wide, 10-20 mm long, and only in the buccal or lingual cortex. Fracture lines in the ramus and posterior mandible were created to be at the interface or borders of the 2 stitched images. CBCT images were obtained from the specimens with an 80 mm×80 mm field of view before and after fracture induction. OnDemand software (Cybermed, Seoul, Korea) was used for stitching the CBCT images. Four observers evaluated 56 (28 stitched and 28 non-stitched) images to detect fracture lines. The diagnostic performance of stitched and non-stitched images was assessed by calculating the area under the receiver operating characteristic curve (AUC). Sensitivity and specificity values were also calculated (alpha=0.05). Results: The AUC was calculated to be 0.862 and 0.825 for the stitched and non-stitched images, respectively (P=0.747). The sensitivity and specificity were 90% and 75% for the non-stitched images and 85% and 87% for the stitched images, respectively. The inter-observer reliability was shown by a Fleiss kappa coefficient of 0.79, indicating good agreement. Conclusion: No significant difference was found in the diagnostic performance of stitched and non-stitched cross-sectional CBCT images of non-displaced fractures of the ovine mandible.

• Journal of dental hygiene science
• /
• v.20 no.1
• /
• pp.51-58
• /
• 2020

Background: The present study aimed to provide basic data to establish a foundation for efficient operation of the organization by identifying the effects of factors related to moral sensitivity and psychological well-being on job engagement of clinical dental hygienists. Methods: This cross-sectional survey consisted of self-administration questionnaires. After the approval by the Institutional Review Board, a survey was conducted from September 2019 to November 2019, targeting dental hygienists with clinical experience of 1 year or more. A total of 189 questionnaires were analyzed using SPSS 18.0 for Windows. The data were analyzed using average standard deviation, t-test, one-way analysis of variance, Scheffe test, Pearson's correlation analysis, and multiple regression analysis. Results: According to job-related characteristics, higher job engagement was associated with more amount of clinical experience, less turnover intention, higher positions, and occasional job fatigue. Job engagement was improved by increasing moral sensitivity and psychological well-being of clinical dental hygienists. The factors affecting job engagement revealed that along with clinical career, the sub-areas of job engagement, namely turnover intention, moral sensitivity, and psychological well-being had statistically significant influence on job engagement and the explanatory power of the model was approximately 44.8%. Conclusion: Joy of working as a clinical dental hygienist, clinical career, turnover intention, moral sensitivity, and psychological well-being were confirmed as influencing factors that affected job engagement of clinical dental hygienists. It is necessary to establish an effective plan to improve job engagement by increasing moral sensitivity and psychological well-being of clinical dental hygienists.