• Advances in concrete construction
• /
• v.5 no.5
• /
• pp.451-468
• /
• 2017

The problem of reducing the self-weight of reinforced concrete structures is very important issue. There are two approaches which may be used to reduced member weight. The first is tackled through reducing the cross sectional area by using voids and the second through using light weight materials. Reducing the weight of slabs is very important as it constitutes the effective portion of dead loads in the structural building. Eleven slab specimens was casted in this research. The slabs are made one way though using two simple supports. The tested specimens comprised three reference solid slabs and eight styropor block slabs having (23% and 29%) reduction in weight. The voids in slabs were made using styropor at the ineffective concrete zones in resisting the tensile stresses. All slab specimens have the dimensions ($1100{\times}600{\times}120mm$) except one solid specimens has depth 85 mm (to give reduction in weight of 29% which is equal to the styropor block slab reduction). Two loading positions or cases (A and B) (as two-line monotonic loads) with shear span to effective depth ratio of (a/d=3, 2) respectively, were used to trace the structural behavior of styropor block slab. The best results are obtained for styropor block slab strengthened by minimum shear reinforcement with weight reduction of (29%). The increase in the strength capacity was (8.6% and 5.7%) compared to the solid slabs under loading cases A and B respectively. Despite the appearance of cracks in styropor block slab with loads lesser than those in the solid slab, the development and width of cracks in styropor block slab is significantly restricted as a result of presence a mesh of reinforcement in upper concrete portion.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.551-562
• /
• 2021

This study aimed to identify the effect of resilience and positive psychological capital on hospital nurses' professional quality of life. A cross-sectional survey design was utilized to investigate 221 general hospital nurses from June 1 to 30, 2021. Professional quality of life (ProQOL), which is conceptualized with three sub-dimensions (compassion satisfaction, burnout, and secondary traumatic stress), resilience, and positive psychological capital variables were measured. There was a positive relationship between compassion satisfaction and resilience, positive psychological capital, and a negative relationship among burnout, secondary traumatic stress, and the other variables in this study. The main factors influencing compassion satisfaction were resilience, and positive psychological capital, which explained about 47% of compassion satisfaction. Burnout was influenced by resilience, positive psychological capital, and work pattern, and these variables explained about 37% of burnout. Notably, it was found that resilience was the most crucial factor in nurses' compassion satisfaction, and positive psychological capital was the most crucial factor in nurses' burnout. Thus, it is suggested to develop and verify the effectiveness of a resilience improvement program and positive psychological intervention program to strengthen the internal resources of hospital nurses.

• Journal of Korean Academy of Nursing
• /
• v.49 no.4
• /
• pp.411-422
• /
• 2019

Purpose: The purpose of this study was to adapt, modify, and validate the Nursing Anxiety and Self-Confidence with Clinical Decision-Making Scale ($NASC-CDM^{(c)}$) for Korean nursing students. Methods: Participants were 183 nursing students with clinical practice experience in two nursing colleges. The construct validity and reliability of the final Korean version of the $NASC-CDM^{(c)}$ were examined using exploratory and confirmatory factor analyses and testing of internal consistency reliability. For adaptation and modification, the instrument was translated from English to Korean. Expert review and a cross-sectional survey were used to test the instrument's validity. Results: The Korean version of the $NASC-CDM^{(c)}$ (KNASC-CDM) was composed of 23 items divided into four dimensions: (i) Listening fully and using resources to gather information; (ii) Using information to see the big picture; (iii) Knowing and acting; and (iv) Seeking information from clinical instructors. The instrument explained 60.1% of the total variance for self-confidence and 63.1% of the variance for anxiety; Cronbach's ${\alpha}$ was .93 for self-confidence and .95 for anxiety. Conclusion: The KNASC-CDM can be used to identify anxiety and self-confidence in nursing students' clinical decision-making in Korea. However, further research should be done to test this instrument, as it is classified differently from the original $NASC-CDM^{(c)}$ version.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.80-86
• /
• 2019

Background: Emigration of health-care workers is a problem within global health systems which affects many countries, including Peru. Several factors have caused health-care workers to emigrate, including burnout syndrome (BS). This study aims to identify the association between BS and its dimensions with the intention of physicians and nurses to emigrate from Peru in 2014. Methods: A cross-sectional study, based on a secondary analysis of the National Survey of Health Users (ENSUSALUD - 2014) was conducted. Sampling was probabilistic, considering the 24 departments of Peru. We include the questionnaire for physicians and nurses, accounting for 5062 workers. BS was measured by the Maslach Burnout Inventory-Human Services Survey. Adjusted odds ratio (OR) was calculated using multiple logistic regression. Results: Of the study population, 44.1% were physicians, 37.7% males, and 23.1% were working in Lima. It was found that 2.8% [95% confidence interval (CI): 2.19-3.45] of health-care workers had BS. The overall prevalence of intention to emigrate among health-care workers was 7.4% (95% CI: 6.36-8.40). Association was found between BS and intention to emigrate in Peruvian health-care workers (OR = 2.15; 95% CI: 1.05-4.40). Emotional exhaustion was the BS dimension most associated with intention to emigrate (OR = 1.80; 95% CI: 1.16-2.78). Conclusion: Physicians and nurses from Peru who suffered from BS were more likely to have intention to emigrate. Policies should be established to reduce BS as a strategy to control "brain drain" from health-care workers of Peru.

• Archives of Plastic Surgery
• /
• v.50 no.1
• /
• pp.106-115
• /
• 2023

Background Primary contraction of full-thickness graft has been traditionally quoted to be 40%. There are lacunae in literature to elaborate on the factors influencing it ever since. Methods About 75 subjects who underwent full-thickness grafting procedures to resurface small defects were included in the study. The initial and final graft dimensions after primary contraction were traced on X-ray templates and the percentage of contraction was evaluated using the graphical method. This was further correlated with age, collagen, elastic matrix metalloproteinases-1 (MMP-1) and -2 content along with dermal thickness of the skin specimen sent from the graft. Results The primary contraction of the graft had a very significant correlation only with the initial size of graft harvested with a linear regression of 33.3% and a Spearman's correlation of 0.587 significant at a p-value of 0.001. Conclusion This study though preliminary tries to highlight an important factor that primary contraction of grafts is a physical phenomenon independent of its contents like collagen, elastin, or MMP-1 and -2 or age and dependent on its initial size of harvest instead.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.8
• /
• pp.17-28
• /
• 2023

Laboratory-scale hydraulic fracturing experiments were conducted on granite specimens at various viscosities and injection rates of the fracturing fluid. A series of cross-sectional computed tomography (CT) images of fractured specimens was obtained via a three-dimensional X-ray CT imaging method. Pixel-level fracture segmentation of the CT images was conducted using a convolutional neural network (CNN)-based Nested U-Net model structure. Compared with traditional image processing methods, the CNN-based model showed a better performance in the extraction of thin and complex fractures. These extracted fractures extracted were reconstructed in three dimensions and morphologically analyzed based on their fracture volume, aperture, tortuosity, and surface roughness. The fracture volume and aperture increased with the increase in viscosity of the fracturing fluid, while the tortuosity and roughness of the fracture surface decreased. The findings also confirmed the anisotropic tortuosity and roughness of the fracture surface. In this study, a CNN-based model was used to perform accurate fracture segmentation, and quantitative analysis of hydraulic stimulated fractures was conducted successfully.

• Journal of Korean Clinical Nursing Research
• /
• v.16 no.3
• /
• pp.145-155
• /
• 2010

Purpose: The purpose of this study was to investigate oncology nurses' professional quality of life and its correlations with job satisfaction and job stress in a tertiary hospital in Seoul, South Korea. Methods: A cross-sectional survey design was utilized to investigate 210 oncology nurses from various oncology and hemato-oncology units. Professional quality of life (ProQOL), which is conceptualized with three sub-dimensions (compassion satisfaction, burnout, and secondary traumatic stress), job satisfaction, job stress, demographic and work-related variables were measured. Results: The participants were all women, with the mean age of 28.4. The participants with high ProQOL was only 14.8%, and 75.3% and 77.6% of the participants reported a moderate to high level of burnout and secondary traumatic stress respectively. Job satisfaction, age, and the total years of nursing practice have positive correlations with compassion satisfaction. Also, compassion satisfaction was significantly different according to age group, work units, the level of education, nursing positions, and the years of practice. Conclusion: Since the level of professional quality of life among oncology nurses was relatively low, the program for oncology nurses to improve compassion satisfaction and to decrease compassion fatigue needs to be developed.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.81-89
• /
• 2016

Purpose - Prior researches have empirically focused on the effect of management consulting quality and consultant capability on entrepreneurial firms' performance. This study, however, focused on investigating the moderating role of absorptive capacity and resource capability between management consulting and entrepreneurial firms' performance. So, this study investigated the relationship among consulting quality, consultant capability, absorptive capacity, resource capability, and entrepreneurial firms' performance from the resource based view (RBV). Especially, this study focused on the mediating role of absorptive and resource capability in relational structure of entrepreneurial firms' dimensions. Research design, data, and methodology - In this study, research hypotheses and model are established by the prior researches from the fields of strategic management and entrepreneurial behavior. Concretely, H1~H4 are the relationship between consulting (consulting quality, consultant capability) and innovation (absorptive capacity, resource capability); H5 is the relationship between absorptive capacity and resource capability; and H6~H7 are the relationship between innovation (absorptive capacity, resource capability) and management performance. The data was collected 207 copies from entrepreneurial firms in South Korea. These firms were established in January 2014 and maintained by November 2015 in high-tech industry. The questionnaire was consisted of five dimensions; consulting quality, consultant capability, absorptive capacity, resource capability, and management performance. Each dimension measured multi items on a 5-point Likert scale. The hypotheses and research model are analyzed using structural equation modeling (SEM) with AMOS 22. Results - The results of this study are as follows. 1) Consulting quality significantly influenced on the absorptive capacity of entrepreneurial firms. 2) But, consultant capability did not influence on the absorptive capacity of entrepreneurial firms. 3) Consulting quality and consultant capability significantly influenced on the resource capability of entrepreneurial firms. 4) Absorptive capacity significantly influenced on the resource capability of entrepreneurial firms; 5) Absorptive capacity did not significantly influence on the management performance of entrepreneurial firms. 6) Resource capability, however, significantly influenced on the management performance of entrepreneurial firms. By these results, absorptive capacity of entrepreneurial firms had a mediating role partly among consulting quality, consultant capability, and management capability. The resource capability of entrepreneurial firms had a mediating role among consulting quality, consultant capability, and management capability, perfectly. Conclusions - According to this study, the high level of consulting quality and consultant capability may enforce the resource capability of entrepreneurial firms. It means, practically, that external knowledge is a driver for innovation, and then the innovation effects on the management performance of entrepreneurial firms. So, at the initial stage, the management consulting programs are very important to entrepreneurial firms and should be conceived as an essential element. This study may contribute to the advancement of academic in field of new start business, small business, or venture business based on resources, especially the role of absorptive capacity and resource capability between consulting programs and management performance. However, this study has some limitations. They are the measurement of consulting quality's items, cross-sectional research, and the limitation of concept and industry.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.65-78
• /
• 2007

The pollutants (Rn, CH, CO, HS, radioactive gas from radiolysis) were generated from the process of construction and operation of underground repository, and after disposal of low-intermediate radioactive waste inside there must be controlled by a ventilation system to distribute them in area where enough air is supported. Therefore, a suitable technical approach is needed especially at an underground repository that is equipped with many entry tunnels, storage tunnels, exhaust-blowing tunnels, and vertical shafts in complicated network form. For the technical approach of such a ventilation system, WIPP (Waste Isolation Pilot Plant) in U. S and SFR (Slutforvar for Reaktorafall) low-intermediate radioactive waste repository in Sweden were selected as the models, for calculating the required air quantity, organizing a ventilation network considering cross section, length, surface roughness of the air passage, and describing a calculation of resistance of each circuit. Based on these procedures, a best suited ventilation system was completed with designing proper capacity of fans and operating plan of vertical shafts. As a result of comparing the two repositories based on the geometry dimensions and ventilation facility equipment operation, more parallel circuit as in WIPP, brought decrease in resistance for entire system leading to reduce of operating costs, and the larger cross-sectional area of the SFR, the greater the percentage of disposal capacity. Accordingly, the mixture of parallel circuit of WIPP repository for reducing resistance and SFR repository formation for enlargement of disposal capacity would be the most rational and efficient ventilation system.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2020

In this study, the variation of the shrinkage in the thickness direction of the molded parts according to the gate size of the polymer core fabricated through the 3D printer using the SLS method was studied. The polymer cores are laser sintered and the powder material is nylon base PA2200. The polymer cores have lower heat transfer rate and rigidity than the metal core due to the characteristics of the material. Therefore, the injection molding test conditions are set to minimize the deformation of the core during the injection process. The resin used in the injection molding test is a PP material. The packing condition was set to 80, 90 and 100% of the maximum injection pressure for each gate size. The runner diameter used was ∅3mm, and the gates were fabricated in semicircle shapes with cross sections 1, 2, and 3 ㎟, respectively. Thickness measurement was performed for 10 points at 2.5 mm intervals from the point 2.5 mm away from the gate, and the shrinkage to thickness was measured for each point. The shrinkage rate according to the gate size tends to decrease as the cross-sectional area decreases as the maximum injection pressure increases. The average thickness shrinkage rate was close to 0% when the packing pressure was 90% for the gate area of 1mm2. When the holding pressure was set to 100%, the shrinkage was found to decrease by 3% from the standard dimension due to the over-packing phenomenon. Therefore, the smaller the gate, the more closely the molded dimensions can be molded due to the high pressure generation. It was confirmed that precise packing process control is necessary because over-packing phenomenon may occur.