• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.128-131
• /
• 2007

It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment and FE analysis were performed during the varied section extrusion process.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.23-29
• /
• 2013

PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권4호
• /
• pp.1-12
• /
• 2024

본 연구에서는 강사장교의 비선형 거동과 하모니 서치 알고리즘에 기반한 사장교 부재 단면 결정 방법을 제시하였다. 하모니 서치 알고리즘은 초기값 설정, 하모니 메모리 초기화, 새로운 하모니 메모리 구성 및 하모니 메모리 업데이트의 과정을 반복하여 최적값을 탐색함으로써 사장교 부재 단면을 결정한다. 하모니 서치 알고리즘으로 선정된 주요 부재 단면으로 3차원 강사장교의 비선형 초기형상해석을 수행하였으며, 초기장력과 형상을 고려하여 복잡한 거동특성과 각 부재의 비선형성을 반영한 사장교 주요 부재인 주탑, 보강거더, 가로보 및 케이블의 최적 단면을 결정하였다. 사장교 주요 부재의 단면 결정을 위한 목적함수로는 전체 중량을 사용하였으며, 제약조건으로 한계상태설계법을 바탕으로 하중저항능력과 사용성에 대한 제약조건식 및 보강거더와 가로보 단면의 폭과 높이의 비율을 추가적인 제약조건으로 고려하고, 주탑, 보강거더 및 가로보의 기하 및 재료 비선형성과 케이블 부재의 비선형성에 따라 부재 단면을 결정할 수 있도록 하였다. 최적 단면 결정 결과, 제안한 해석 방법은 사장교의 다양한 설치조건에 따라 최적 단면을 결정할 수 있으며, 비선형성을 고려한 사장교 부재 단면제원을 하모니 서치 기법을 통하여 결정할 수 있음을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제23권4호
• /
• pp.338-346
• /
• 2013

Equations of motion of a rotating blade considering pre-twist angle, cross section taper and a concentrated mass are derived using the hybrid deformation variable modeling method. For the modeling of a concentrated mass which is located at an arbitrary position of the blade, a Dirac delta function is employed for the mass density function. The final equations for the vibration analysis are transformed into a dimensionless form using several dimensionless parameters. The effects of the dimensionless parameters on the vibration characteristics of the rotating blade are investigated through numerical analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• Journal of Preventive Medicine and Public Health
• /
• 제24권1호
• /
• pp.29-36
• /
• 1991

A multiple regression analysis using ordinary least square (OLS) is frequently used for the projection of health expenditure as well as for the identification of factors affecting health care costs. Data for the analysis often have mixed characteristics of time series and cross section. Parameters as a result of OLS estimation, in this case, are no longer the best linear unbiased estimators (BLUE) because the data do not satisfy basic assumptions of regression analysis. The study theoretically examined statistical problems induced when OLS estimation was applied with the time series cross section data. Then both the OLS regression and time series cross section regression (TSCS regression) were applied to the same empirical da. Finally, the difference in parameters between the two estimations were explained through residual analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2094-2096
• /
• 2005

In this paper, we studied the cross section analysis based on the short circuit conditions of the low voltage bare wires. The copper wires prepared for the experiment were 1.2mm 1.6mm and 2.0mm in diameter. Through the cross section analysis(CSA), it was confirmed that the dendrite structure grew at the angle of about $40^{\circ}$ or $60^{\circ}$ when the fusing current was applied to the wires. The larger the fusing current is, the more decreased the growth angle of the dendrite structure is. It was confirmed that the dendrite structure was arranged like the columnar structure. In this paper, the characteristics analysis of short circuit was carried out in the range of transient duration.

• Clinics in Shoulder and Elbow
• /
• 제21권2호
• /
• pp.67-74
• /
• 2018

Background: Fatty degeneration of rotator cuff is a well-known predictor of postoperative outcome. The purpose of this study was to evaluate the clinical features of rotator cuff tears involving subscapularis, and investigate whether fatty degeneration quantified from only the upper subscapularis correlates better with clinical outcomes than quantified from the whole subscapularis. Methods: We retrospectively analyzed 315 consecutive patients who underwent arthroscopic repair for rotator cuff tears involving subscapularis with a minimum follow-up of 1 year. Preoperative and postoperative visual analogue score for pain, range of motion and functional scores were assessed. Integrity of the repaired tendon was assessed at the 1-year follow-up with either magnetic resonance imaging or ultrasonography. Results: The mean Goutallier grade of whole cross-section was significantly lower than that of upper cross-section (1.59 vs. 1.71, p<0.05), but significantly higher than that of lower cross-section (1.59 vs. 1.01, p<0.05). In analysis of 37 re-tears, the occupancy of severe fatty degeneration in upper cross-section was 86.5%, which was significantly higher than that seen in whole cross-section (56.8%, p<0.05). We calculated the cut-off tear size for prediction of re-tears as 19.0 mm for retraction and 11.0 mm for superior-inferior. The cut-off Goutallier grade was 2.5 for both whole and upper cross-sections, but area under the curve was greater in the upper cross-section than the whole (0.911 vs. 0.807). Conclusions: As fatty degeneration of upper subscapularis demonstrated a more distinct spectrum than whole subscapularis, we suggest that measuring fatty degeneration of upper subscapularis can be a more useful method to predict clinical prognosis.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.118-125
• /
• 2015

The roll-forming process is a highly productive incremental forming process and is suitable for manufacturing thin, high-strength steel products. Recently, this process has been considered one of the most productive processes in manufacturing high-strength steel automotive structural parts. However, it is very difficult to develop the roll-forming process when the cross-sectional shape of the product changes in the longitudinal direction. In this study, a roll-forming process for manufacturing high-strength steel automotive parts with a linearly variable symmetric hat-type cross-section was developed. The forming rolls were designed by the 3D CAD system, CATIA. Additionally, the designed forming rolls were modified by the simulation through the 3D elastic-plastic finite element analysis software, MARC. The results of the finite element analysis show that the final roll-forming roll can successfully produce the desired high-strength steel automotive part with a variable cross-section.

• Composites Research
• /
• 제17권4호
• /
• pp.25-31
• /
• 2004

본 연구에서는 다중세포로 구성된 타원형 단면 복합재료 블레이드의 정밀 1차원 보 해석모델을 개발하였다. 보의 정식화를 위하여 Reissner의 반보족에너지 함수를 이용하였으며, 고전적인 강성도 및 유연도법을 결합한 혼합보 이론 체계를 구축하였다. 타원단면의 특성계수들을 구하기 위해 단면의 외곽선을 유한개의 선분으로 분할하고 여기에 Gauss 적분을 수행하였다. 또한, 단면을 구성하는 각 세포에 대해 4개의 연속방정식이 충족되도록 구성하였다. 개발된 보 이론을 단일 및 이중세포로 구성된 타원형 복합재료 블레이드에 적용하였으며, 다차원 정밀 유한요소 해석 결과와 비교하여 그 타당성을 확보하였다.