• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.3
• /
• pp.171-192
• /
• 2018

With the spread of the maker movement and matching of the standards for the 21st century learners and the maker competencies, there is a social and temporal need for makerspaces building and maker education in school libraries, Prior to the establishment of the school library makerspaces, we intended to investigate the awareness of the school librarian on the creation and operation of the school library makerspaces. For this purpose, a questionnaire was constructed based on the theoretical review and the response data of 171 school librarians were collected through a web survey. Technical statistics, cross-analysis, and ANOVA were conducted using SPSS window 19.0 and content analysis was conducted on open-ended questions. The Questionnaires consisted of questions about whether the school library makerspace was installed or not and necessity, reason, and difficulty in creating and operating the makerspace. As a result of the study, it was found that the establishment of the school library makerspace was very low at 2.3%, and the recognition of the makerspace of the school librarian was below the normal level. On the other hand, the perception of necessity appeared to be more than normal, and the school library was generally considered to be a suitable place for the makerspace installation. However, negative opinions about the school library makerspaces were also raised in various aspects.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.269-275
• /
• 2004

Different biological tissues have different values of electrical resistivity. In EIT (electrical impedance tomography), we try to provide cross-sectional images of a resistivity distribution inside an electrically conducting subject such as the human body mainly for functional imaging. However, it is well known that the image reconstruction problem in EIT is ill-posed and the quality of a reconstructed image highly depends on the measurement error. This requires us to develop a high-performance EIT system. In this paper, we describe the development of a 16-channel digital EIT system including a single constant current source, 16 voltmeters, main controller, and PC. The system was designed and implemented using the FPGA-based digital technology. The current source injects 50KHz sinusoidal current with the THD (total harmonic distortion) of 0.0029% and amplitude stability of 0.022%. The single current source and switching circuit reduce the measurement error associated with imperfect matching of multiple current sources at the expense of a reduced data acquisition time. The digital voltmeter measuring the induced boundary voltage consists of a differential amplifier, ADC, and FPGA (field programmable gate array). The digital phase-sensitive demodulation technique was implemented in the voltmeter to maximize the SNR (signal-to-noise ratio). Experimental results of 16-channel digital voltmeters showed the SNR of 90dB. We used the developed EIT system to reconstruct resistivity images of a saline phantom containing banana objects. Based on the results, we suggest future improvements for a 64-channel muff-frequency EIT system for three-dimensional dynamic imaging of bio-impedance distributions inside the human body.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.1
• /
• pp.1-21
• /
• 2007

Among numerous policy influencers' and researchers' advices and policy suggestions, there is little opposition to the proposition that technology is essential to the economic development. The role of technology has never been more emphasized than today in Korea as in any other countries. The effects of the government's innovation policy on corporate R&D activities and more broadly the economic welfare of a whole nation are widely recognized with intuitional and empirical evidence. That is, various R&D incentives reduce the marginal cost of a firm's R&D efforts, inducing as much increase of its R&D investment to result in a better chance to acquire target technology. This paper examines the impact of R&D incentives on the technological outcomes by analyzing individual firms' investment behaviors subject to the government's R&D incentive policies. An econometric model of technological outcomes is estimated on a project level with cross-sectional data. "Probit model" is employed for estimations. Special attention was given to the effectiveness of R&D programs by estimating policy impact by types of investment. The data were collected from 928 different R&D projects completed between 1987 and 1993. With the single equation approach, we were able to find that the structure of investment is a far more significant factor in technological outcomes than the total amount of investment. The analysis also shows that the two types of firms' matching investment, in-kind and cash, do not bear a complementary, but a substitutive relations to each other. It also reconfirms the proposition that R&D incentives increase firm's financial investment. Despite many supportive studies emphasizing the cooperation between innovation performers, it is also found that the larger the number of institutions involved in a project, the less likely it leads to a technological success, And meeting the proposed deadlines without postponing is estimated to be a good barometer to predict the outcome of an R&D project. Also the probabilities of success for major variables are represented for policy implications, after calculating marginal effects.

• Radiation Oncology Journal
• /
• v.5 no.1
• /
• pp.49-58
• /
• 1987

Hypertermia for the treatment of cancer has been introduced for a long time and the biological effect for the use of hyperthermia to treat malignant tumors has been well established and encouraging clinical results have been obserbed. Unfortunately, however, the engineering or technical aspects of hyperthermia for the deep seated tumors has not been satisfactory. We developed the radiofrequency capactive hyperthermia device (Greenytherm-GY8) in cooperation with Yonsei Cancer Center and Green Cross Medical Corporation. It was composed with $8{\sim}10MHz$ RF generator, capacitive electrode, matching system, cooling system, temperature measuring system and control PC computer. The thermal profile was investigated in agar phantom, animals and in human tumors, heated with capactivie RF device. Deep and homogeneous heating could be achieved in a large phantom of 25cm diameter and 19cm thick when heated with a pair of 23cm diameter electrodes, coupled to both bases of the phantom, when the size of the two electrodes was not the same, the region near the smaller electrode was preferentially heated. It was, therefore, possible to control the depth of heating by choosing proper size of electrodes. Therapeutic temperature $(42^{\circ}C{\sim}43^{\circ}C)$ could be obtained in the living animal experiments. Indications are that deep heating of humn tumors might be achieved with the capacitive method, provided that subcutaenous fat layer is cooled by temperature controlled bolus and large size of electrodes.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.19-35
• /
• 1997

The purpose of this study is to find out the characteristics of landform in Geoje-Do using GIS and DTED data. The characteristics of landform in Geoje-Do are as follows; First, the height-range of Geoje-Do is $0{\sim}580m$, and the average elevation of it is 124m. Volcanic and granite region is mainly appeared at high elevation-region. But, we can't find out outstanding difference of elevation, according to its geology. The second. the slope-range of Geoje-Do is $0{\sim}52$ degree, and the average slope of it is 17.6 degree. The slope of volcanic and granite area is more steeper than any other region. But the results of analysis of the geology in Geojo-Do, don't show outstanding difference of the slope. The third, the area-rate of the aspect of Geoje-Do is almost same in all direction. And the area-rate of south-west direction is the highest. According to the geology of Geoje-Do, granite is distributed the most widely, and the area of volcanic and granite occupy 60% of entire island's area. According to analysis of influence of geology with elevation, geology has little relationship with elevation. According to analysis of geology and drainage network, streams are inclined to be developed well in Alluvium area. Drainage network is well developed throughout the entire island, except southeast area. The highest order of stream is 4 in 1:25,000 topographic map. The density of stream in Geoje-Do is very high, such as 1.6. The bifurcation-ratio of stream is also higher than 4 in all order. The length-ratio of stream is ranged from 1.24 to 3.25. According to the relationship between order and elevation. order is the greater, elevation is the lower. According to the relationship between order and slope, order is the greater, slope is the gentler. In this study, we use DTED Data, and compare it with topographic map data. According to the comparison, there is a little difference between DTED data and topographic map data. Therefore, to use DTED data in landform analysis, it is required coordinate matching process. This process is very important, and take very long time. Thus, if you use DTED in landform analysis, some processes are required. DTED data can be taken very easily, but its using is not simple. Because coordinate adjust is very hard work.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.1
• /
• pp.145-156
• /
• 2012

Objectives : By analyzing the affects of the mother's oral care to the caries experiences of the elementary school children, To looking for the way to prevent dental caries in the primary school, to provide baseline data to perform the associated oral health education. Methods : Between the 3,676 children's dental check-up data and the 2,934 survey of parents from 9 elementary schools in the the Gyeonggi Province, the exactly matching data of 2,358 pairs, children versus mothers, were analyzed during the period, 2009 May 4 to July 20, By using the PASW 18(SPSS-PC 18), Frequency analysis of the collected data, and cross-analysis, ANOVA, Bonferroni post-analysis was performed. Results : The findings of the study were as follows. 1. In children, the ratio(DMF rate)of the dental caries experience in permanent teeth, appeared higher for men than women. Divided by grade level, the ratio of caries experience in the permanent teeth(DMF rate) generally appear higher in older than young. Thus between the child's gender and grade level by the ratio of caries experience in the permanent teeth(DMF rate) showed the statistically significant differences (p<0.05). 2. Between the socioeconomic characteristics of mothers and the children's level of dental caries experiences, not showed the statistically significant difference.(p>0.05). 3. The significant difference showed between the dental caries levels of the children and the mother's oral health care behavior - a toothbrush replacement period, mother's broken teeth, mothers guidances of the brushing after snacks for children(p<0.05). Conclusions : The mother's oral health attitudes and behaviors can affect to their children's oral care habits. Therefore The mother themselves should have the right proper habit of oral health care, so that in oral health care mothers should be the model for their children. Institutionally more systematic and detailed oral health educational program in conjunction with the family is needed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.515-525
• /
• 1998

In this paper, for both transmission and reception with single antenna system of satellite communication, dual-frequency antennas which operate simultaneously at 12.5 GHz and at 14.25 GHz are designed, constructed and measured. Also by using dual feeding structure, the problems of single-fed dual-frequency antenna such as the separation of transmitting and receiving signals and single polarization, are solved. Microstrip patch as a radiation element of dual-fed dual-frequency antenna has width and length which are the resonance lengths of the corresponding frequencies for transmission and reception, respectively. The effects of the feed line on the other frequency feeding are minimized with the optimal matching scheme for the feed lines. For solving the space problems of dual-fed two-dimensional array antennas, microstrip-line and coaxial probe feedings are used for each frequency and a two-dimensional $2\times2$ array antenna was designed and measured their characteristics. The experimental results show that errors of resonance frequencies are less than 1.44%, the return losses are less than -21 dB and the isolations between two feeding ports are less than -21 dB. The characteristics of radiation patterns of dual frequency microstrip antenna are measured and evaluated. The directivities, sidelobe levels and cross polarizations are also measured and compared with the simulations. The results show some errors due to the misalignment of coaxial probe feeding.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.384-386
• /
• 2014

As the type of property data of military terrain analysis map is using FACC of DIGEST, there is a limitation in utilizing a domestic thematic map which is in use of other type of property data. However, even though the attempts to utilize the domestic thematic map are made at military sites, the study has not been conducted enough. Therefore, we defined it by matching the property data necessary for the military terrain analysis cartography and property of the domestic thematic map, and analyzed in accordance with the method to analyze the cross-country movement roads specified in FM 5-33. But, there was no data for the diameter of trees in the vegetation map among a terrain analysis map, whereas there being data for the sort of trees. As the diameter of trees can be broken through to the extent of certain diameters by tracked vehicles, they are the factors necessary in analyzing. In this study, the research was conducted focusing on calculating the diameters for some trees described in a stand yield table by using the age-class for trees in a forest floor map with a scale of 1:5000 and calculating the diameters of trees by using the diameter-class for the diameters of other trees.

• Journal of Environmental Health Sciences
• /
• v.48 no.6
• /
• pp.324-330
• /
• 2022

Background: Lung injuries due to exposure to humidifier disinfectants (HDs) were reported in 2011 in South Korea. As a result of the government's epidemiological investigation and toxicity test study, it was found that HDs caused health damage such as lung disease. Objectives: The purpose of this study was to classify HD exposure ratings and analyze the affecting factors that could identify the relationship with lung disease. Methods: Exposure assessment for HDs was conducted using a questionnaire during face-to-face interviews with the applicants. Ratings of high exposure (Class 1) and low exposure (Class 2) were cross-tabulated with clinical ratings (acceptable and unacceptable). Logistic regression analysis was carried out by setting the clinical rating of lung disease as a dependent variable and the socio-demographic and exposure characteristics obtained through the questionnaire as independent variables. Results: The concentration in air of polyhexamethylene guanidine (PHMG) was 71.96±107.47 ㎍/m³, and the exposure concentration was 15.21±23.28 ㎍/m³ . The exposure rating was overestimated with 97.1% of affected subjects having high exposure using margin of exposure (MOE), but only 9.9% matching the clinical class. In the overestimated group, it could be explained by the fact that the exposure time was long and the subjects had already recovered from damage symptoms. As a result of logistic regression analysis, ten variables were found to be significant influencing factors. Conclusions: A new exposure rating could be calculated based on the MOE, and factors affecting lung disease could be estimated through comparative evaluation with the clinical rating.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.2
• /
• pp.113-128
• /
• 2024

Items of road tunnel PISD (Precise Inspection for Safety and Diagnosis) were reviewed and analyzed using newly enhanced MMS (Mobile Mapping System) technology. Possible items with MMS can be visual inspection, survey and non-destructive test, structural analysis, and maintenance plan. The resolution of 3D point cloud decreased when the vehicle speed of MMS is too fast while the calibration error increased when it is too slow. The speed measurement of 50 km/h is determined to be effective in this study. Although image resolution by MMS has a limit to evaluating the width of crack with high precision, it can be used as data to identify the status of facilities in the tunnel and determine whether they meet disaster prevention management code of tunnel. 3D point cloud with MMS can be applicable for matching of cross-section and also possible for the variation of longitudinal survey, which can intuitively check vehicle clearance throughout the road tunnel. Compared with the measurement of current PISD, number of test and location of survey is randomly sampled, the continuous measurement with MMS for environment condition can be effective and meaningful for precise estimation in various analysis.