• 한국전자파학회논문지
• /
• 제16권8호
• /
• pp.797-802
• /
• 2005

본 논문에서는 UHF 대 역용(911 MHz) 태그로 금속체 부착 가능한 태그로써 PIFA 형태 를 채택하여, $50{\times}30{\times}4$ mm의 크기로 칩의 임피던스(77-j100 ${\Omega}$)와 공액 정합이 되는 태그 안테나를 설계 및 제작하였다. RFID 태그로부터 backscattering 되는 필드, 즉 RCS(Radar Cross Section)을 통해 태그 안테나의 성능을 평가하였다. 제안된 태그 안테나는 칩의 임피던스에 쉽게 정합시킬 수 있는 간단한 구조이고, foam을 이용하여 저가에 생산할 수 있는 장점을 가지고 있다. RCS값이 칩이 단락일 때 RCS 값은 $-21\;dBm^2$이고, 정합일 때는 $-10.2\;dBm^2$로 효율적인 RCS 특성을 가지고 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.474-478
• /
• 1999

SAR interferometry (InSAR) using the space-borne Synthetic Aperture Radar (SAR) have recently become one of the most effective tools monitoring surface changes caused by landslides, earthquakes, subsidences or volcanic eruption. This study focuses on examining the feasibility of InSAR using the RADARSAT data. Although the RABARSAT SAR with its high resolution and variable incidence angle has several advantages for repeat-pass InSAR, it has two key limitations: first, the orbit is not precisely known; and second, RADARSAT's 24-day repeat pass interval is not very favourable for retaining useful coherence. In this study, two pairs of RADARSAT data in the Nahanni area, NWT, Canada have been tested. We will discuss about the special consideration required on the interferometric processing steps specifically for RADARSAT data including image co-registration, spectral filtering in both azimuth and range, estimation of the interferometric baseline, and correction of the interferogram with respect to the "flat earth" phase contribution. Preliminary results can be summarized as: i) the properly designed azimuth filter based upon the antenna characteristic improves coherence considerably if difference in Doppler centroid of the two images is relatively large; ii) the co-registration process combined by fringe spectrum and amplitude cross-correlation techniques results in optimal matching; iii) the baseline is not always possible to be estimated from the definitive orbit information.

• 경영과학
• /
• 제17권3호
• /
• pp.19-30
• /
• 2000

Customization and personalization services are considered as a critical success factor to be a successful Internet store or web service provider. As a representative personalization technique, personalized recommendation techniques are studied and commercialized to suggest products or services to a customer of Internet storefronts based on demographics of the customer or based on an analysis of the past purchasing behavior of the customer. The underlining theories of recommendation techniques are statistics, data mining, artificial intelligence, and/or rule-based matching. In the rule-based approach for personalized recommendation, marketing rules for personalization are usually collected from marketing experts and are used to inference with customers data. however, it is difficult to extract marketing rules from marketing experts, and also difficult to validate and to maintain the constructed knowledge base. In this paper, we proposed a marketing rule extraction technique for personalized recommendation on Internet storefronts using market basket analysis technique, a well-known data mining technique. Using marketing basket analysis technique, marketing rules for cross sales are extracted, and are used to provide personalized advertisement selection when a customer visits in an Internet store. An experiment has been performed to evaluate the effectiveness of proposed approach comparing with preference scoring approach and random selection.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.565-568
• /
• 2007

본 논문에서는 안테나 근역장 측정의 광대역성을 위해 이중리지 도파관 프로브를 설계하고 제작한 결과를 보여주고 있다. 광대역 임피던스 정합을 위해 구형 도파관내에 테이퍼 리지와 도파관 천이기를 사용하였다. 본 프로브는 정재파비 3.0이하에서 약 123%(4.17:1)정도의 광대역 특성을 가지고 있으며 방사이득은 $5.7\sim14.3dBi$ 였다. 본 프로브의 성능은 측정을 통하여 검증하였으며 그 결과가 양호함을 알 수 있었다.

• 천문학회보
• /
• 제37권1호
• /
• pp.32.1-32.1
• /
• 2012

Radial color gradient of disk galaxies has been a key tool for diagnosing the ages and metallicities of the stars and gas of these galaxies, and thus, the formation process of these disks. In many cases, observational data support the 'inside-out' picture of disk galaxy formation proposed by Larson (1976). In this scenario, gas within dark matter halos cools and accretes on to the outer disk while enhancing star formation in the disk. Recent discoveries of "extended ultra-viloet" (XUV) disks also show that majority of disk galaxy experience active star formation within out disks where gas surface density is quite low (Thilker et al. 2007; Gil de Paz et al. 2007). However, neither gas, nor stars stay put within galaxies. They rather migrate into bulges, disperse throughout galaxies, or flow into and out of galaxies via various mechanisms. There have been a few notable studies to investigate how radial star formation and metal abundance gradients vary across populations of disk galaxies systematically. However, the mechanisms driving gas transport are still poorly understood. Cross-matching various galaxy catalogs including KVAGC and UKIDSS, we are investigating if color gradients of late-type galaxies depend on their physical properties, especially on environmental properties. We will present the result from the pilot study on Karachentsev isolated galaxy catalog.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2487-2495
• /
• 2000

The acoustic characteristics of expansion chamber will be changed with the variation of inlet/outlet location due to the higher order acoustic mode in a high frequency in which the plane wave theory is not available. In this paper, the acoustic performance of reactive type expansion chamber with circular cross-section is analyzed by using the modified mode matching theory. The sensitivity analysis of four-pole parameters with respect to the location of inlet and outlet is also suggested to increase the acoustic performance. The acoustic power transmission coefficient is used as cost function, and the location of inlet and outlet is used as design variables. The steepest descent method and SUMT algorithm are used for optimization technique. Several results showed that the expansion chamber with optimally located inlet/outlet had better acoustic performance than concentric expansion chamber.

• Advances in materials Research
• /
• 제1권4호
• /
• pp.245-268
• /
• 2012

Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.

• 여성건강간호학회지
• /
• 제23권3호
• /
• pp.155-165
• /
• 2017

Purpose: The aim of this study was to understand the hand-on breast massage techniques used by well-known experts in breastfeeding clinics. Methods: A qualitative multiple-case design was applied that involved a feasibility test. Four experts sampling qualitative data collected by observing participants and in individual interviews were analyzed by content analysis, linking data to the propositions, and cross-case pattern matching. This study explored differences within and between cases, and the possibilities of replicating findings across cases. Thirty-nine postpartum women participated voluntarily in the feasibility test, which investigated the usability of four massage techniques. Results: The four techniques showed considerable similarities in terms of the application of stimulation to the breast base and increased flexibility of the wired flexible body, which was the core mechanism underlying the techniques. The breast management strategies were consistent with existing practice guidelines with the exception of using cold cabbage to control engorgement pain. There was insufficient scientific evidence for supporting the massage techniques used by the experts. All of the techniques showed 100% education completeness, but application rates were higher for self-control-oriented techniques. Conclusion: The massage techniques applied by experts in breastfeeding were based on hypotheses and self-control techniques are feasible to apply in practice.

• 대한전자공학회논문지TC
• /
• 제41권8호
• /
• pp.119-124
• /
• 2004

본 논문에서는 무선LAN 및 ISM용을 위한 5［GHz］대역 원편파 마이크로스트립 배열안테나를 설계 제작하였다. 원편파를 위한 기존의 십자형 슬롯 안테나 구조를 수정하여 두 개의 슬롯이 직각으로 교차하는 부분을 없애고 분리된 4개의 슬롯으로 구성된 안테나 구조를 제안하였다. 기존의 구조에서 급전선로와 슬롯간의 비대칭으로 전자기적 결합의 약화와 슬롯의 비대칭으로 발생되는 기생요소의 증가로 안테나 효율이 약화되는 문제가 있는 반면, 제안된 구조의 안테나는 대역폭 증가와 후방 방사의 감소를 확인하였다. 제안된 안테나는 공진 주파수가 5［GHz］대역의 2${\times}$2 마이크로스트립 배열안테나를 제작하여 최대 12.5［dBi］의 이득과 280［MHz］의 대역폭(VSWR < 1.5)를 얻었다.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.736-743
• /
• 2003

A process of 3-D particle image velocimetry, called here, as '3-D stereo PIV' was developed for the measurement of an illuminated slied section field of 3-D complex flows. The present method includes modeling of camera by a calibrator based on the homogeneous coordinate system, transfromation of the oblique-angled image to the right-angled image, identification of 2-D velocity vectors by 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterior, and finally 3-D animation as the post processing. An experimental system was also used for the application of the proposed method. Three analog CCD cameras and an Argon-Ion Laser(300mW) for illumination were adopted to capture the wake flow behind a bluff obstacle.