• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.930-932
• /
• 2003

As Synchronous Reluctance Motor gives reluctance torque, An inductance is an important parameter that is proportional to torque. To achieve the high performance in sensorless control, it is necessary to consider exact inductance values because the inductance is not a constant parameter anymore. Therefore, this paper shows the inductance measurement using DC current decay test, AC standstill test, and AC standstill test considering Cross Magnetization. This inductance has also been compared with the result that is analyzed by FEM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.585-588
• /
• 2003

Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. AC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. The cross sections of 55 filaments and 61 filaments were investigated after rolled in order to understand deformation mechanism of superconducting cores. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. AC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

• 한국의학물리학회지:의학물리
• /
• 제19권4호
• /
• pp.269-275
• /
• 2008

슬관절 퇴행성 질환을 진단하기 위하여 자기공명영상(magnetic resonance imaging: MRI)이 많이 사용되지만 간혹 슬관절 병후 및 예후를 잘못 진단하는 경우가 종종 발생한다. 본 연구에서는 슬관절 질환의 진단에 도움을 주기 위하여 자화전이(magnetization transfer: MT) 영상법을 소개하고자 한다. 슬관절 환자 7명으로부터 스핀 에코(SE) T2 강조 영상(3,400-3,500/90-100 ms)과 슬관절 환자 7명으로부터 FSE T2 강조 영상(4,500-5,000/100-108 ms)과 또한 슬관절 환자 3명으로부터 gradient echo (GRE) T2 강조 영상들(9/4.56 ms, 50 flip angle, NEX 1)을 획득하였다. 6명의 슬관절 환자에서 지방 억제가능 T2 강조 STIR 펄스시퀀스(TR/TE=2894-3215 ms/70 ms, NEX 3, ETL 9)를 사용하였다. 지방 포화도에 있어서 위상감도 방법은 Larmor frequency 차이에 따른 위상 차이를 이용하므로, 각각의 픽셀에 대한 자화전이율(magnetization transfer ratio: MTR)의 측정은 포화된 영상과 포화되지 않은 영상의 비율에 따라 산출하였다. 따라서 각 입력된 영상들은 동차원성을 가지고, 시각적으로 신호강도 정도가 회색의 명암도만으로 평가될 수 있기 때문에 생리학적, 정량적 진단을 위하여 3차원 등방성 체적영상과 자기공명 삼원색을 매핑하였고 정량적 특정은 자화전이율 지도로서 표현하였다. 자화전이율 영상은 병변 부위에서 높은 대조도를 나타내어 환자의 병태를 추적하는데 도움을 주었고 정량화하였다. 자화전이율 영상들과 기존의 MRI 사이에 명암도 차이는 회색상으로 표현되며, 자화전이율 영상화의 효과에 대해 프로파일 그래프는 자화전이 펄스로 인하여 신호강도에 있어서 정량적 측정값이 상대적으로 감소하였다. 슬관절의 정확한 병리상태를 진단하기 위해 프로파일 그래프의 측정값을 영상과 함께 표현하였다. 본 연구에서 수행한 예비적 데이터들을 통하여 슬관절의 자화전이율 영상들이 매우 임상학적으로 유용함을 확인하였다. 자화전이율 영상에 대한 물리적 변화를 관찰함으로써 자화전이율 영상에 대한 물리적, 기술적 기반에 대한 더 많은 통찰력을 제공할 수 있다. 무릎 질환 환자의 자화전이율 영상들을 이용하여 매우 높은 대조도를 확보할 수 있으므로 슬관절 질환의 정밀 진단에 매우 도움을 줄 수 있다.

• 한국재료학회지
• /
• 제23권5호
• /
• pp.293-298
• /
• 2013

In this study, an HP-mod. type(KHR-45A), which is used as a heater tube material in the pyrolysis process, was evaluated for its carburizing properties. It was confirmed from the microstructural observation of the tubes that the volume fraction of carbide increased and that the coarsening of Cr-carbide generated as a degree of carburization increased. The depth of the hardened layer, which is similar to the thickness of the carburized region of each specimen, due to carburization is confirmed by measurement of the micro-Vickers hardness of the cross section tube, which thickness is similar to that of the carburized region of each specimen. Two types of chromium carbides were identified from the EBSD (electron back-scattered diffraction) image and the EDS (energy-dispersive spectroscopy) analysis: Cr-rich $M_{23}C_6$ in the outer region and Cr-rich $M_7C_3$ in the inner region of tubes. The EDS analysis revealed a correlation between the ferromagnetic behavior of the tubes and the chromium depletion in the matrix. The chromium depletion in the austenite matrix is the main cause of the magnetization of the carburized tube. The method used currently for the measurement of the carburization of the tubes is confirmed; carburizing evaluation is useful for magnetic flux density measurement. The volume fraction of the carbide increased as the measuring point moved into the carburized side; this was determined from the calculation of the volume fraction in the cross-section image of the tubes. These results are similar to the trends of carburization measurement when those trends were evaluated by measurement of the magnetic flux density.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.615-622
• /
• 2012

The switching frequency of the power electronic devices used in large synchronous motor drives is usually kept low (less than 1 kHz) to reduce the switching losses and to improve the converter power capability. However, this results in a couple of problems, e.g. an increase in the harmonic components of the stator current, and an undesired cross-coupling between the magnetization current component ($i_m$) and the torque component ($i_t$). In this paper, a novel complex matrix model of electrically excited synchronous motors (EESM) was established with a new control scheme for coping with the low switching frequency issues. First, a hybrid observer was proposed to identify the instantaneous fundamental component of the stator current, which results in an obvious reduction of both the total harmonic distortion (THD) and the low order harmonics. Then, a novel complex current controller was designed to realize the decoupling between $i_m$ and $i_t$. Simulation and experimental results verify the effectiveness of this novel control system for EESM drives.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.213-217
• /
• 2002

We have fabricated successfully single-filament composite $MgB_2$/SUS tapes, as an ultrarobust conductor type. The fabrication of the $MgB_2$/SUS tapes was performed by power-in-tube (PIT) process such as swaging and cold rolling. The critical transition temperatures $T_{c}$~38.5 K and ~36 K were observed for the sintered and the nonsintered $MgB_2$/SUS tapes, respectively In addition, the isothermal magnetization M(H) of the sintered $MgB_2$/SUS tapes was measured at temperatures T (between 5 and 50 K) in fields up to 6 T, employing a PPMS-9 (Quantum Design). The persistent current density (J$T_{P}$) values were obtained from the M(H) data, using Bean model, fur the sintered $MgB_2$/SUS tapes. The estimated values were higher than ~ 6$\times$ $10^{5}$ $A/\textrm{cm}^2$ at T = 5 K, with H : 0 G. We also investigated the cross section of the sintered tapes, by using SEM and EDX. An evidence of weak reaction on boundary between $MgB_2$ and SUS tube is found in the SEM and EDX.X.X.X.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.490-500
• /
• 1996

The conventional method to deal with current transformer (CT) Saturation is over dimensioning of the core so that CTs can carry up to 20 times the rated current without exceeding 10% ratio correction. However, this not only reduces the sensitivity of relays as some errors may still be present in the secondary current when a severe fault occurs, but also increases the CT size. This paper presents an algorithm for compensating the distorted secondary current of iron-cored CTs under CT saturation using the magnetization (flux-current : .lambda.-i) curve and its performance is examined for fault currents encountered on a typical 345[kV] Korean transmission system, under a variety of different system and fault conditions. In addition, the results of hardware implementation of the algorithm using a TMS320C10 digital signal processor are also presented. The proposed algorithm can improve the sensitivity of relays to low level internal faults, maximize the stability of relays for external faults, and reduce the required CT core cross-section significantly. (author). refs., figs.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.50-53
• /
• 2023

In this study, the photolithography process was chosen to reduce the aspect ratio of the cross-section of a high-temperature superconducting (HTS) tape by dividing the superconducting layer of the tape. Reducing the aspect ratio decreases the magnetization losses in the second-generation HTS tapes generated by AC magnetic fields. The HTS tape used in the experiment has a thin silver (Ag) layer of about 2 ㎛ on top of the REBCO superconducting layer and no additional stabilizer layer. A dry film resist (DFR) was laminated on top of the HTS tape by a lamination method for the segmentation. Exposure to a 395 nm UV lamp on a patterned mask cures the DFR. Dipping with a 1% Na₂CO₃ solution was followed to develop the uncured film side and to obtain the required pattern. The silver and superconducting layers of the REBCO films were cleaned with an acid solution after the etching. Finally, the segmented HTS tape was completed by stripping the DFR film with acetone.

• Advances in nano research
• /
• 제5권3호
• /
• pp.215-230
• /
• 2017

The development of hybrid systems comprising nanoparticles and polymers is an opening pathway for engineering nanocomposites exhibiting outstanding mechanical, optical, electrical, and magnetic properties. Among inorganic counterpart, iron oxide nanoparticles (IONP) exhibit high magnetization, controllable surface chemistry, spintronic properties, and biological compatibility. These characteristics enable them as a platform for biomedical applications and building blocks for bottom-up approaches, such as the layer-by-layer (LbL). In this regard, the present study is addressed to investigate IONP synthesised through co-precipitation route (average diameter around 7 nm), with either positive or negative surface charges, LbL assembled with sodium sulfonated polystyrene (PSS) or polyaniline (PANI). The surface and internal morphologies, and electrochemical properties of these nanocomposites were probed with atomic force microscopy, UV-vis and Raman spectroscopy, scanning electron microscopy, cross-sectional transmission electron microscopy, and electrochemical measurements. The nanocomposites display a globular morphology with IONP densely packed while surface dressed by polyelectrolytes. The investigation of the effect of thermal annealing (300 up to $600^{\circ}C$) on the oxidation process of IONP assembled with PSS was performed using Raman spectroscopy. Our findings showed that PSS protects IONP from oxidation/phase transformation to hematite up to $400^{\circ}C$. The electrochemical performance of nanocomposite comprising IONP and PANI were investigated in $0.5mol{\times}L^{-1}$ $Na_2SO_4$ electrolyte solution by cyclic voltammetry and chronopotentiometry. Our findings indicate this structure as promising candidate for potential application as electrodes for supercapacitors.

• 한국자기학회지
• /
• 제14권5호
• /
• pp.163-168
• /
• 2004

나노 두께의 NiFe의 자기적 특성을 살펴보기 위해 Si(100)/ $SiO_2$(200 nm)/Ta(5 nm)/N $i_{80}$F $e_{20}$(1～15 nm)의 구조를 ICP형 헬리콘 스퍼터로 제작하였다. 제작된 시편의 자기적 물성은 SQUID를 이용하여 $\pm$50 Oe에서의 4.2K와 300K에서 각각의 M-H loop를 측정하여 자기탄성에너지 변화와 보자력을 확인하였다. 또한 SQUID로 4.2K-300K에서의 M-T curve를 통해 온도에 따른 포화자화를 두께에 따라 살펴보았다. TEM을 사용하여 제작된 시편의 각 계면간의 미세구조를 살펴보았다 나노두께의 NiFe는 3 nm 이하에서는 $B_{bulk}$=0, $B_{surf}$=-3${\times}$$10^{-7}$(J/$m^2$)의 자기 탄성계수를 보였으며, 보자력은 급격히 증가하는 것을 확인하였다. 나노 두께의 퍼말로이는 계면효과에 의해서 벌크특성과 다른 자기탄성계수, 보자력, Ms의 변화가 발생하였다. 따라서 나노급 소자를 제작할 때 이러한 변화를 고려하여 설계하여야 하였다.