• 한국포장학회지
• /
• 제7권2호
• /
• pp.25-30
• /
• 2001

Corrugated board is composed of cellulose fibers which are arranged with the same direction as the board manufactured. The direction is classified with machine direction (MD) and cross-machine direction (CD). Therefore, corrugated board is orthotropic material that has totally different strength properties at each direction and especially, at machine direction, the mechanical properties of fiberboard is superior. The compression strength of the corrugated fiberboard boxes is very important information to the manufacturers and the end users. This study was carried out to design the optimum pattern, size, and location of ventilating hole for ventilating container through the finite element analysis. The optimum pattern and location of ventilating and hand hole were vertical oblong, a short distance to the right and left from the center of panel, and center or a short distance to the top of both sides, respectively. We identified the effect on both stress dispersion and stress level from the analysis of redisigned hand hole.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.44-48
• /
• 2009

In automotive company, a lot of researchers have investigated for the spatterless welding process during last two decades. A spatter influences on the product quality such as strength and surface states. In this paper, a hollow tip is proposed for spatterless process. An optimal size of electrode hole is obtained from a weldability evaluation of each hole diameter. Through the cross section analysis, a phenomenon that molten metal moves in the hole which located between two workpiece is observed, and this makes spatterless welding process even though current is higher. Finally, widely acceptable weld area in lobe curve is obtained by using hollow tip as compare with conventional no hollow tip. In this paper, spatterless resistance spot welding with improvement weldability and productivity is proposed by using hollow tip.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.973-979
• /
• 2007

A laser vision system is developed to measure the three-dimensional feature of an object. This system consists of two low cost cameras and a cross laser. One camera and a cross laser are used to measure a plane equation of an object. Using this information, the other camera measures a hole size of an object. The proposed system provides 0.05 mm accuracy measurement systems with relatively low cost.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
• /
• pp.117-123
• /
• 2005

지반의 동적물성치 측정을 위해 시도된 인홀시험법은 경제성과 실용성을 갖춘 공내 탄성파탐사이다. 이전 연구에서 개발된 인홀 장비의 수동식 트리거(trigger) 시스템을 전기식 시스템으로 개량하였고, 발진자와 감지기 사이에 최적의 연결재를 개발하였다. 여러 현장에서 크로스홀 시험과 인홀 시험을 통하여 이 장비의 성능을 검증하였다. 토사층과 암반에서 동적 강성을 평가하였고, 최근에는 터널막장의 수평한 장약공에서도 전단파속도를 측정함으로서 다양한 지반에의 적용성을 확인하였다.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.100-105
• /
• 2008

Cross-drilling on the brake disc is generally known as a way of improving cooling efficiency. In other theories, cross-drilled holes act like a path of gas or water and are also known that they can reduce fading and wetting of brake rotors. However, in disc rotors with cross-drilling, thermal crack phenomena have been reported more frequently and more manufacturing cost should be paid than non cross-drilled disc rotors. In this study, to examine various effects of cross-drilling on the brake disc, two kinds of brake disc rotors, cross-drilled and non cross-drilled, were used in computational fluid dynamic analyses and dynamometer tests.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.144-151
• /
• 2008

An experimental study has been conducted to investigate the effects of circular damage hole on the characteristics of airfoil performance. The damage on a wing created from a hit by anti-air artillery was modeled as a circular hole. Force balance measurements and static pressure measurements on the wing surface were carried out for the cases of having damage holes of 10% chord size at quarter chord and/or half chord positions. All experiments were conducted at Reynolds number of $2.85\times10^5$ based on the chord length. The surface pressure data show big pressure alterations near the circular damage holes. This abnormal surface pressure distribution produces shear stress that could lead to the acceleration of the structural degradation of the wing around the circular damage hole. However, in spite of the existence of circular damage holes, the measured force data indicated the only a slight decrease in lift accompanied by increase in drag compared to the results of undamaged one. The influence of damage hole on the aerodynamic performance was increased as the location of damage moved to the leading edge. The effect on the control force was insignificant when the damaged size was not large.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.285-288
• /
• 2003

The bending phenomenon during extruding one product using four billets can be obtain by the difference of hole diameters in the multi-hole container. The difference of hole diameter caused the difference of billet amount inserted in the die cavity. As results, it can bend during extruding products by the different amount of two billets and by the cohesion of billets in the porthole dies cavity. And the bending curvature can be controlled by the size of holes and billets. The experiments using aluminium material had been done for the rectangular and square curved tube product. The results of the experiment show that the curved aluminum tube product can be bended by the extru-bending process without the defects such as the distortion of section and the thickness change of the wall of tube and the folding and wrinkling. The curvature of product is affected by shape of cross section and the difference of billet diameters. It is known that the welding and extruding and bending can be done simultaneously in the die cavity when a rectangular hollow curved tube would be extruded by porthole dies using four different size billets made of aluminum material.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1005-1012
• /
• 2001

When vortex tubes are applied to enhance the coefficient of performance of refrigeration system, the smaller one is preferable. However, the existing vortex generator with a nozzle hole diameter of 0.5mm was not suitable due to chocking of the nozzle hole. Therefore, experimental investigation was made to find an appropriate geometry of vortex generator, which could give a comparable effect of energy separation to commercial ones without chocking problem. The tested vortex generators were tangential and spiral types, which had single inducing channel with larger cross-sectional area than that of conventional multi-hole ones. The experimental result showed that the performance of the spiral type was better than that of the tangential one. As a small size of spiral one, the diameter of cold-end orifice is proposed to an half of tube diameter for the application to refrigeration system, while cold mass fraction ratio is 0.5∼0.6 for a desirable operation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권5호
• /
• pp.39-53
• /
• 2007

일반적으로 균열암반 매질은 수리전도도 혹은 그 난수장이나(연속체 모형), 투수성 균열의 공간적 통계적 분포(불연속균열망 모형)를 이용하여 표현할 수 있다. 본 연구에서는 잘 알려진 균열암반매질의 개념 모형의 실질적 적용성을 검토하기 위하여 충청남도 금산군 남이면 남이자연휴양림 내 한국지질자원연구원 시험부지 내에서 다양한 현장 수리 시험을 적용하고, 그 결과를 비교검토하였다. 본 지역에서 투수성 구간의 수리전도도 값은 $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec이며, 산술평균은 $7.70{\times}10^{-7}$ m/sec, 기하평균은 $2.16{\times}10^{-7}$ m/sec이다. 단공 패커 시험의 경우 총 8개의 공에서 총 110개 구간에 대한 시험을 수행하였다. 이 시험 구간 중 불투수성 구간은 총 9개, $1.0{\times}10^{-8}$ m/sec 이하의 수리전도도를 가지는 저투수성 구간은 총 14개로 전반적으로는 투수성이 양호한 것으로 확인되었다. 단공 패커시험을 통해 나타난 수리전도도의 수직적 분포는 단공 유향 유속 시험 결과와 비교적 잘 부합하는 양상으로 나타나고 있다. 하지만, 공간 수리시험의 결과는 전반적으로 투수성이 양호하다는 단공 시험 결과와는 다소 다른 양상을 보인다. 공간시험의 결과는 투수성보다는 연결성을 포함한 균열암반 매질의 투수성/불투수성의 이진법적 특성에 의해 더 큰 영향을 받는 것으로 나타났다. 따라서 균열암반 매질에서의 지하수 유동에 대한 개념 모형의 현실적이고 합리적인 설정을 위해서는 투수성/불투수성의 이진법적 특성에 대해 어떻게 규명할 것인가에 대한 조사방법과 해석방법에 대한 지속적인 연구가 요구된다.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.129-136
• /
• 2002

Electric vehicle body has to be subjected to uniform load and demand auxiliary equipment such as air pipe, electric wire pipe and gas pipe. Especially, lightweight vehicle body is salutary to save operating costs and fuel consumption. Cross beam supports the weight of passenger and electrical equipments and account for the most of weight of vehicle body. Therefore this study performs the size and the shape optimization of crossbeam for electric vehicle using GENESIS 7.0 and presents the effect of mass reduction and the shape of hole in cross beam.