• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.44-49
• /
• 2006

In this study, the resolution capabilities of electrical resistivity tomography (ERT) in the monitoring of $CO_2$ injection are investigated. The pole-pole and bipole-bipole electrode configuration types are used between two uncased boreholes straddling the $CO_2$ plume. Forward responses for an initial pre-injection model and three models for subsequent stages of $CO_2$ injection are calculated for the two different electrode configuration types, noise is added and the theoretical data are inverted with both L1- and L2-norm optimisation. The results show that $CO_2$ volumes over a certain threshold can be detected with confidence. The L1-norm proved superior to the L2-norm in most instances. Normalisation of the inverted models with the pre-injection inverse model gives good images of the regions of changing resistivity, and an integrated measure of the total change in resistivity proves to be a valid measure of the total injected volume.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.80-83
• /
• 2017

In this paper, the X-band reconfigurable frequency selective surface having flexible geometry was proposed. The proposed RFSS is composed of patterns of cross-shaped loop with inductive stub, which can control the frequency response for C-Band and X-band by ON/OFF state of PIN diode. To minimize the parasitic effect and to obtain the high level of isolation between the unit cell of FSS and the bias circuit, we designed the grid type bias line on bottom layer through via hole. The measured transmission characteristics show good agreement with the simulation results and good stability of frequency response for different incident angles and curvatures of surface.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.384-392
• /
• 2017

A linear explosively formed penetrator(LEFP) is a modification of the explosively formed penetrator(EFP). An EFP is axisymmetric and has a dish-shaped liner while LEFP has a rectangular-shaped liner with curved cross section. Upon detonating LEFP forms laterally wide projectile like blade, leaving a long penetration hole on the target. On the other hand, a long-rod tungsten heavy alloy(WHA) penetrator is one of the major threats against most of the ground armored vehicles. In this paper, the feasibility of using an LEFP in protecting against a long-rod WHA penetrator by colliding LEFP into the threat was investigated through a set of numerical simulations. In this study, a scale-down WHA penetrator with length to diameter ratio(L/D) of 10.7 and 7.0 mm diameter was used to represent a long-rod WHA penetrator. LS-DYNA and Multi-Material ALE technique were employed for the simulation. For estimation of the protection effect by LEFP, residual penetration depths into RHA by the threat were compared according to various impact locations against the threat.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.4-4
• /
• 2009

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was welded through a combination of a diode laser and CNC. Laser beam passed the transparent PC and was absorbed in an opaque ABS. Polymers were melted and welded by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead size and the specimen cross-section were analyzed, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was 3.75mm and the shear strength was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in CNC machining processes, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision. By combining two operations processes developed process gained 50% more efficiency.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.5
• /
• pp.428-436
• /
• 2014

This study was conducted to investigate the use of sugar alcohols (sorbitol, erythritol, and xylitol) as alternative sweeteners for replacing sucrose in Yukwa (traditional Korean oil-puffed rice snack). The moisture contents of Bandegi (dried Yukwa dough) and Yukwa containing sugar alcohols were higher than that of control (containing only sucrose). The microstructures of control and Bandegi containing sugar alcohols showed uniformly and finely distributed air holes. Expansion ratio and oil absorption of Yukwa containing sorbitol and 30% erythritol were higher than those of control. Appearance and cross section of control and Yukwa containing sorbitol, 30% erythritol, and 30% xylitol showed a good shape. The lightness (L) of control was significantly lower than Yukwa containing sugar alcohols, whereas redness (a) and yellowness (b) were higher than those in Yukwa containing sugar alcohols. Hardness of Yukwa containing sugar alcohols was significantly lower than that of control, and that of Yukwa containing sorbitol was the lowest. Peak number of Yukwa containing sugar alcohols was significantly lower than that of control, and that of Yukwa containing 60% erythritol and 60% xylitol was the lowest among all samples. In the sensory evaluation, color of control was deepest, whereas that of Yukwa containing 60% xylitol was lightest. Volume and air hole uniformity of Yukwa containing 60% erythritol and 60% xylitol were inferior than those of other samples. Sweetness of Yukwa containing sugar alcohols was lower than that of control, whereas oily flavor was stronger. Hardness of Yukwa containing sugar alcohols was lower than that of control, and Yukwa containing xylitol showed the lowest hardness among the samples. Crispness of Yukwa containing sugar alcohols was lower than that of control. There were no significant differences in overall acceptability between control and Yukwa containing 30% sorbitol and 30% erythritol. Overall, sorbitol and erythritol were appropriate as a 30% replacement for sucrose when preparing Yukwa.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.61.1-61.1
• /
• 2011

We have performed simultaneous observations at 22GHz and 43GHz on AGNs hosted by elliptical galaxies using KVN radio telescope. We have constructed the sample, based on two major surveys in radio and optical band, i.e. Faint Images of the Radio Sky at Twenty-Centimeters (FIRST) and Sloan Digital Sky Survey (SDSS) DR7, respectively. We restricted the redshift range 0.01 < z < 0.06 and the absolute magnitude Mr < -19.4 in order to satisfy volume limited sample. We also checked clear detection of four distinctive emission lines ([NII], [OIII], $H{\alpha}$, $H{\beta}$) so as to utilize on BPT diagram, distinguishing AGNs from star-forming galaxies. Elliptical galaxies have been selected by visual inspection making use of SDSS optical images. Then, we cross-matched the elliptical galaxies with FIRST detections. About 35% of the galaxies have been detected throughout KVN observations. We derive spectral index, applying the flux of different radio frequencies from FIRST (1.4GHz) and KVN (22GHz) and classify into steep, flat or inverted spectrum. We have found that most of the detected galaxies have flat spectrum while the rest of them have steep spectrum. This implies that a number of detected galaxies might have compact structure associated with the central region of the galaxies. The relation between black hole mass and radio luminosity has shown relatively tighter correlation in high frequency than in low frequency, which confirms that high frequency in radio band is appropriate to study the center of the galaxies.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.123-129
• /
• 2017

Morphological and ultrastructural characteristics of human hair medulla was investigated with scanning electron microscopy and transmission electron microscopy. The medulla is located in the central position of hair shaft and appear greatly variable forms which discontinuous shape arranged from hair root to apical portion according to longitudinal axis. The thickness of medulla from a single hair presented as very variable in size. The diameter of cross section of human hair medulla measured as $21{\mu}m$ and longitudinal section showed $27{\mu}m$. It grows up to 1/3 from 1/4 in diameter of human hair shaft. It appears emptied hole during separating of macrofibrils in the keratinocyte. The empty space measured $6.5{\mu}m$ in diameter as maximum size and it was filled with air.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.68.2-68.2
• /
• 2016

We present the variability and time lag measurements of PG 0934+013 based on the photometric and spectroscopic monitoring campaign over two years. We obtained 46 epochs of data from the spectroscopic campaign, which was carried out using the South African Large Telescope with 1 week cadence over two sets of 4 month-long observing period, while we obtained 80 epochs of B band data from the campaign. Due to the six month gap between two campaigns, we separately measured the time lag of the $H{\beta}$ emission line by comparing the emission line light curve with the B band continuum light curve using the cross-correlation function techniques. We determined the time lags and black hole mass.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1532-1548
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. The tunnel outlet was planned to be made after installing slope stabilization system on natural slope there. Generally, the tunnel outlet is made perpendicularly to the slope, but in this case, it had to be made obliquely to the slope for not interrupting flow of river. Because of excavation in condition of natural slope caused to deflecting earth pressure, the outlet couldn't be made. So, artificial ground made with concrete that it was constructed in the outside of tunnel for producing the arching effect which enables to make a outlet. We were planned tunnel excavation was carried out after artificial ground made. Artificial ground made by poor mix concrete of which it was planned that the thickness was at least 3.0m height from outside of tunnel lining and 30cm of height per pouring. Spreading and compaction was planned utilized weight of 15 ton roller machine. In order to access of working truck, slope of artificial ground was designed 1:1.0 and applied 2% slope in upper pert of it for easily drainage of water. In addition to, upper pert of artificial ground was covered with soil, because of impaction of rock fall from upper slope was made minimum. The tunnel excavation of the artificial ground was designed application with special blasting method that it was Super Wedge and control blasting utilized with pre-percussion hole.

• The KIPS Transactions:PartB
• /
• v.14B no.5
• /
• pp.351-360
• /
• 2007

Video Completion refers to a computer vision technique which restores damaged images by filling missing pixels with suitable color in a video sequence. We propose a new video completion technique to fill in image holes which are caused by removing an unnecessary object in a video sequence, where two objects cross each other in the presence of camera motion. We remove the closer object from a camera which results in image holes. Then these holes are filled by color information of some others frames. First of all, spatio-temporal volumes of occluding and occluded objects are created according to the centroid of the objects. Secondly, a temporal search technique by voxel matching separates and removes the occluding object. Finally. these holes are filled by using spatial search technique. Seams on the boundary of completed pixels we removed by a simple blending technique. Experimental results using real video sequences show that the proposed technique produces new completed videos.