• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.485-494
• /
• 1998

Communication network numbers are used in classifying each kind of network, identifying the communication companies and choosing services that are supplied by the companies. In the present, a new numbering system is needed to distinguish a new additional communication network. However the present numbering system of domestic communication network has some problems such as exhaustion of network number, excessive local numbers, and so forth So, in this thesis we call the wire and the wireless telephone network, the pager network and the personal number as communication networks, and consider the present condition and problems of our country, Korea, and foreign countries. Then we propose the efficient numbering plan. Firstly, the present 10 numbering systems that are distributed, such as communication networking number $\ulcorner$01X$\lrcorner$ are diminished into 5 communication network numbers that have same quality. Secondly, subscriber numbers are united to 8 digit and 144 area codes are made into widened 5 area codes. Thirdly, the personal numbering services are cross-distributed by century. And we examine the technical convening plan and the legal converting plan and investigate expecting efficiency of proposed numbering system. If this numbering plan is executed, subscriber's number on communication networks are unified at 8 digits, 5 reserve numbers are secured in exhausted communication network number of $\ulcorner$01X$\lrcorner$, and they can distribute subscriber numbers over twice as much. In addition, number acceptability is enlarged from 237,600 thousands to 400,000 thousands. Personal number can be classified at not only century but also a decade. Accordingly, acceptable numbers are increased two folds enough to provide unification and population increase. We were able to confirm all the efficiencies.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.21-28
• /
• 2009

The purpose of this study was to improve the culturability of 'IR 36', a indica type rice cultivar using DNA marker associated with the ability of plant regeneration in anther and seed culture. The culturability of 6 rice cultivars and 2 indica/japonica lines ('MGRI 036', 'MGRI 079') were investigated in anther and seed culture. The culturability of 3 japonica rice cultivars were much higher than tongil and indica rice cultivars, and 'MGRI 036' and 'MGRI 079' has high culturability with 20% regenerability, also. 34 $BC_2F_4$ 4 lines were selected by marker screening using RZ400 among 90 $BC_2F_4$ lines derived from a cross between 'MGRI 079' and 'IR 36'. The frequency of callus formation of 10 $BC_2F_4$ lines were higher than 'IR 36' in anther culture among selected 34 $BC_2F_4$ lines. The ability of plant regeneration of 10 lines were higher than 'IR 36' in the seed culture among selected 34 $BC_2F_4$ lines. A promising line, $BC_2F_4$-28, was selected to have better culturability in the anther and seed culture among selected 34 $BC_2F_4$ lines. The heading date and grain shape of the $BC_2F_4$-28 was similar to 'IR 36'. Using the RZ400 DNA marker associated with the culturability will be useful method for improving of indica rice culticvar's culturability in rice breeding program.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.435-441
• /
• 2018

In this study, we performed to design an image guiding algorithm to improve the efficiency and safety of treatment of varicose vein by focused ultrasound. The algorithm was suggested by different guiding images according to the location of varicose veins. In the case of deep-seated varicose veins, the target area was marked on the surface of the blood vessel in the obtained cross-sectional blood vessel ultrasound image. In the case of the superficial varicose vein, A guiding system based on image segmentation algorithm of the vascular region was suggested and designed two different algorithms according to varicose veins progression degree. as a results, the algorithm based on ultrasound image show a small error with $830{\mu}m$ at maximum. However, the algorithm based on charge coupled device image has a maximum error of 8.3 mm in some data. Therefore, it is expected that additional study is needed for superficial varicose vein image guiding algorithm, and it is expected that the accuracy of blood vessel tracking should be evaluated by constructing simple system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.27-62
• /
• 1975

These studies were aimed at clarifying whether or not selecting agronomic characteristics of hybrid-rice populations under greenhouse conditions was useful. The selection of two quantitative characteristics, culm length and heading date, and two qualitative characteristics, shattering and awnedness, was very effective, but the flag leaf length and the exsertion of panicle was not consistent, varying from one cross to another.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.449-459
• /
• 2010

We performed numerical simulations of the excavation of an underground structure (the Giheung Tunnel) in order to evaluate the rate of groundwater flow into the structure and to estimate the groundwater level around the structure. The tunnel was constructed in Precambrian bedrock in Gyeonggi Province, South Korea. Geological and electrical resistivity data, as well as hydraulic test data, were used for the numerical modeling. The modeling took into account the strike-slip faults that cross the southern part of Giheung Tunnel, as these structures influence the discharge of groundwater into the tunnel. The transient modeling estimated a groundwater flow rate into the tunnel of $306\;m^3$/day, with a grout efficiency of 40%, yielding good agreement between the calculated change in groundwater level (6.20 m) and that observed (6.30 m) due to tunnel excavation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.13-20
• /
• 2017

High-rise building shapes are changing from orthogonal to irregular form and the current trend is to arrange members in geometric grid-patterns at the perimeter of buildings. This study proposes a simple model for the preliminary design of a hexagrid high-rise building. The size of the cross section is set to be different at each module and hexagrid unit, which is different from the previous studies in which all hexagrid members were the same. To examine the effect of hexagrid size on structural performance, 60-story hexagrid buildings with 1-, 2- and 4-story high modules are designed and analyzed. Maximum lateral displacement, steel tonnage, load carrying percentage of perimeter frame and combined strength ratio are compared for 15 buildings. As the lateral load carrying capacity of hexagrid structure was inferior to a diagrid structural system, proper lateral stiffness should be allocated to the core frame in a hexagrid structure. The best ratio of flexural to shear deformation was 4 and larger unit size was better in considering constructional cost and structural efficiency. As the maximum lateral displacements of the buildings were within 84%~108% of the limit, the proposed method seems to be applicable to preliminary design of hexagrid buildings.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.503-515
• /
• 2017

Underground structures that have recently become larger are required to be stable not only during normal times but also during earthquakes. Especially, it is very important to maintain the stability of the subsea tunnels during the earthquake. The objective of this paper is to verify the effectiveness of the flexible segment, which is one of the breakthrough facilities to maintain the stability of the subsea tunnel during the earthquake using the shaking table test. Another goal of this paper is to propose the optimum position of the flexible segment through 3D dynamic numerical analysis based on the verified results from shaking table tests. The 1g shaking table test considering the similarity ratio (1:100) to the cross section of the selected artificial subsea tunnel was carried out considering the Geongju and Artificial seismic waves, longitudinal and lateral wave, and with/without flexible segments eight times or more. As a result of the shaking table test, it was confirmed that the flexible segment is effective in improving the seismic performance of the undersea tunnel in all the experimental results. In addition, 3D dynamic numerical analysis was performed to select the optimum position of the flexible segment which is effective for improving seismic performance. As a result, it was confirmed that the seismic acceleration is attenuated when the flexible segment is installed adjacent to the branch section in subsea tunnel.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.547-554
• /
• 2010

In this study, new manganese oxide (i.e., black-birnessite) particles with nanostructures were prepared and its physico-chemical properties and oxidative-transformation efficiency on 1,4-naphthoquinine(1,4-NPQ) in the presence of reactive mediator was investigated. The results were also compared with that of the manganese oxide (i.e., brown-birnessite) particles synthesized by classical McKenzie method. Analysis of XRD and SEM data show that the particles are a single phase corresponding to a birnessite-based manganese oxide with cotton ball-like shapes containing nanofibers. In batch experiments, removals of 1,4-NPQ by the black-birnessite follows pseudo-first-order kinetics and the rate constant values obtained are greater about 2.3 times than that of the brown-birnessite in spite of its lower surface area (41.0 vs 19.80 $m^2/g$). The results can be explained by the higher crystallinity and nano structured features of the back-birnessite particles, which give higher reactivity for the removals of the quinone compound. HPLC analysis of the reaction products confirmed that the balck-birnessites removed 1,4-NPQ through cross-coupling reaction in the presence of catechol as a reactive mediator.

• Journal of KIISE:Software and Applications
• /
• v.37 no.1
• /
• pp.60-73
• /
• 2010

This paper aims to describe KorLexClas 1.5 which provides us with a very large list of Korean numeral classifiers, and with the co-occurring noun categories that select each numeral classifier. Differently from KorLex of other POS, of which the structure depends largely on their reference model (Princeton WordNet), KorLexClas 1.0 and its extended version 1.5 adopt a direct building method. They demand a considerable time and expert knowledge to establish the hierarchies of numeral classifiers and the relationships between lexical items. For the efficiency of construction as well as the reliability of KorLexClas 1.5, we use following processes: (1) to use various language resources while their cross-checking for the selection of classifier candidates; (2) to extend the list of numeral classifiers by using a shallow parsing techniques; (3) to set up the hierarchies of the numeral classifiers based on the previous linguistic studies; and (4) to determine LUB(Least Upper Bound) of the numeral classifiers in KorLexNoun 1.5. The last process provides the open list of the co-occurring nouns for KorLexClas 1.5 with the extensibility. KorLexClas 1.5 is expected to be used in a variety of NLP applications, including MT.