• ETRI Journal
• /
• 제33권4호
• /
• pp.537-546
• /
• 2011

This paper introduces an automated method for building height recovery through the integration of high-resolution satellite images and digital vector maps. A cross-correlation matching method along the vertical line locus on the Ikonos images was deployed to recover building heights. The rational function models composed of rational polynomial coefficients were utilized to create a stereopair of the epipolar resampled Ikonos images. Building footprints from the digital maps were used for locating the vertical guideline along the building edges. The digital terrain model (DTM) was generated from the contour layer in the digital maps. The terrain height derived from the DTM at each foot of the buildings was used as the starting location for image matching. At a preset incremental value of height along the vertical guidelines derived from vertical line loci, an evaluation process that is based on the cross-correlation matching of the images was carried out to test if the top of the building has reached where maximum correlation occurs. The accuracy of the reconstructed buildings was evaluated by the comparison with manually digitized 3D building data derived from aerial photographs.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.260-266
• /
• 2003

The objective of this study is to compare the general body measurements and shoulder shapes of Korean and American elderly women to supply basic data for the apparel design. The anthropometrics data was collected including both direct and indirect measurements of 283 women over the age of 55 in Korean and the American women. The statistical methods used for the analysis of measurement data are the T-test, Exploratory data analysis, ANOVA and Duncan-test respectively. The results of the T-test indicated that there is a significant difference in the 14 body measurement items except of waist circumference. The results of exploratory data analysis, an independent relationship between shoulder slope angle and forward shoulder roll of Korean women. On the other hand, there is a dependent relationship that the bigger shoulder slope and forward shoulder roll with wide cross back shoulder of American women. Comparison of mean among the three different age groups, aged 55~59 group shows significant differences in the value of difference between cross back shoulders and horizontal shoulder width. This finding indicates that the wide and forward roll shoulder needs to special pattern making like ease amount and curvature for fit and comfort for women's apparel.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1259-1277
• /
• 2015

The present study is focused on the behavior and design of perforated steel storage rack columns under axial compression. These columns may exhibit different types of behavior and levels of strength owing to their peculiar features including their complex cross-section forms and perforations along the member. In the present codes of practice, the design of these columns is carried out using analytical formulas which are supported by experimental tests described in the relevant code document. Recently proposed analytical approaches are used to estimate the load carrying capacity of axially compressed steel storage rack columns. Experimental and numerical studies were carried out to verify the proposed approaches. The experimental study includes compression tests done on members of different lengths, but of the same cross-section. A comparison between the analytical and the experimental results is presented to identify the accuracy of the recently proposed analytical approaches. The proposed approach includes modifications in the Direct Strength Method to include the effects of perforations (the so-called reduced thickness approach). CUFSM and CUTWP software programs are used to calculate the elastic buckling parameters of the studied members. Results from experimental and analytical studies compared very well. This indicates the validity of the recently proposed approaches for predicting the ultimate strength of steel storage rack columns.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.125-138
• /
• 2018

This paper proposes a transfer matrix method for the bending vibration of two types of tapered beams subjected to axial force, and it is applied to analyze tapered beams with an edge or multiple edge open cracks. One beam type is assumed to be reduced linearly in the cross-section height along the beam length. The other type is a tapered beam in which the cross-section height and width with the same taper ratio is linearly reduced simultaneously. Each crack is modeled as two sub-elements connected by a rotational spring, and the method can evaluate the effect of cracking on the desired number of eigenfrequencies using a minimum number of subdivisions. Among the power series available for the solutions, the roots of the differential equation are computed using the Frobenius method. The computed results confirm the accuracy of the method and are compared with previously reported results. The effectiveness of the proposed methods is demonstrated by examining specific examples, and the effects of cracking and axial loading are carefully examined by a comparison of the single and double tapered beam results.

• Steel and Composite Structures
• /
• 제10권4호
• /
• pp.297-315
• /
• 2010

This paper is concerned with free vibration characteristics and natural frequency of horizontally curved composite plate girder bridges. Three-dimensional finite element models are developed for the girders using the software package LUSAS and analyses carried out on the models. The validity of the finite element models is first established through comparison with the corresponding results published by other researchers. Studies are then carried out to investigate the effects of total number of girders, number of cross-frames and curvature on the free vibration response of horizontally curved composite plate girder bridges. The results confirm the fact that bending modes are always coupled with torsional modes for horizontally curved bridge girder systems. The results show that the first bending mode is influenced by composite action between the concrete deck and steel beam at low subtended angle but, on the girders with larger subtended angle at the centre of curvature such influence is non-existence. The increase in the number of girders results in higher natural frequency but at a decreasing rate. The in-plane modes viz. longitudinal and arching modes are significantly influenced by composite action and number of girders. If no composite action is taken into account the number of girders has no significant effect for the in-plane modes.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.237-249
• /
• 2002

파괴 이전 상태의 낮은 변형률 수준 하에서 정확한 지반 변형 거동 예측을 위해서는 흙의 비선형성과 이방성을 함께 고려해야 한다. 본 연구에서는 Ramberg-Osgood 식을 이용하여 흙의 비선형성을 모사하고 직교이방성을 도입하여 흙의 이방성을 구현한 새로운 모델을 개발하였다. 새롭게 개발한 비선형 이방성 모델을 여러 비교 대상 모델과 함께 간단한 경계치 문제와 원형 기초 문제에 적용하였다. 그 결과 이방성을 나타내는 탄성계수비가 체적 계수, 정지 토압계수, 그리고 유효 응력 경로에 큰 영향을 미치는 사실을 알아내었으며, 원형 기초 해석을 통해 초기 지중 응력 상태를 고려한 흙의 비선형성이 지표 침하에 큰 영향을 줌을 알 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제17권2호
• /
• pp.98-104
• /
• 2017

This work describes the development and comparison of two phase-locked loops (PLLs) based on a 65-nm CMOS technology. The PLLs incorporate two different topologies for the output voltage-controlled oscillator (VCO): LC cross-coupled and differential Colpitts. The measured locking ranges of the LC cross-coupled VCO-based phase-locked loop (PLL1) and the Colpitts VCO-based phase-locked loop (PLL2) are 119.84-122.61 GHz and 126.53-129.29 GHz, respectively. Th e output powers of PLL1 and PLL2 are -8.6 dBm and -10.5 dBm with DC power consumptions of 127.3 mW and 142.8 mW, respectively. Th e measured phase noise of PLL1 is -59.2 at 10 kHz offset and -104.5 at 10 MHz offset, and the phase noise of PLL2 is -60.9 dBc/Hz at 10 kHz offset and -104.4 dBc/Hz at 10 MHz offset. The chip sizes are $1,080{\mu}m{\times}760{\mu}m$ (PLL1) and $1,100{\mu}m{\times}800{\mu}m$ (PLL2), including the probing pads.

• 한국전자통신학회논문지
• /
• 제9권5호
• /
• pp.595-600
• /
• 2014

요즘 우리 사회는 급속히 고령화 사회로 변화되고 있다. 고령화 사회에서는 치매에 대하여 잘 아는 것이 매우 중요한 일이다. 따라서 본 연구는 기본적으로 치매환자로부터 측정한 EEG 신호의 특성을 파악하는 것을 목표로 한다. 먼저 그것을 위하여 치매환자와 정상인의 EEG 특성을 구분하기 위하여 두 그룹의 자발 EEG 신호를 분석하였다. EEG 신호는 16개의 전극으로 계측하였고, 그 신호들은 주파수대역으로 분류하여 분석하였다. 보다 선명한 EEG 신호로 처리하기 위해서는 2개의 채널 간에 상호상관함수를 적용하였다. 그 결과, 치매환자와 정상인의 EEG 신호의 특성은 분명히 다르다는 사실을 확인할 수 있었다.

• 국제물리치료학회지
• /
• 제11권1호
• /
• pp.1954-1959
• /
• 2020

Background: Due to aging, blood flow rate decreases, also posture and chewing habit may be changed. Objective: To identify that changes in blood velocity in the common carotid arteries (CCAs) in old persons with unilateral chewing habit (UCH) and forward head posture (FHP) in the elderly. Design: An observational cross-sectional study. Methods: Chewing habits, FHP, and CCAs velocities were assessed in 85 elderly subjects. Chewing habits were measured by visual observation. CCAs measured the peak systolic velocity (PSV), end-diastolic velocity (EDV), minimum diastolic velocity, and resistivity index. The subjects were divided into UCH and bilateral chewing habit groups depending on chewing habit. The subjects were also divided into >49 degrees and <49 degrees for comparison of blood flow between the left and right CCAs. Results: In the UCH, the chewing side had significantly higher EDV (P=.003), PSV (P=.023) than the non-chewing side. There was no significant difference in velocity between the CCAs in the FHP. Conclusion: This study shows that the blood flow velocity of the chewing side of UCH was higher, and unilateral chewing affects the CCAs velocity and thus highlight the importance of chewing habit in the elderly than head posture.

• Child Health Nursing Research
• /
• 제25권4호
• /
• pp.496-506
• /
• 2019

Purpose: The purpose of this study was to examine the effects of a virtual reality simulation and a blended simulation on nursing care for children with asthma through an evaluation of critical thinking, problem-solving processes, and clinical performance in both education groups before and after the educational intervention. Methods: The participants were 48 nursing students. The experimental group (n=22) received a blended simulation, combining a virtual reality simulation and a high-fidelity simulation, while the control group (n=26) received only a virtual reality simulation. Data were collected from February 25 to 28, 2019 and analyzed using SPSS version 25 for Windows. Results: The pretest and posttest results of each group showed statistically significant improvements in critical thinking, problem-solving processes, and clinical performance. In a comparison of the results of the two education groups, the only statistically significant difference was found for critical thinking. Conclusion: Simulation-based education in child nursing has continued to involve high-fidelity simulations that are currently run in many programs. However, incorporating a new type of blended simulation, combining a virtual reality simulation and a high-fidelity simulation, into the nursing curriculum may contribute to the further development of nursing education.