• 한국의학물리학회지:의학물리
• /
• 제20권2호
• /
• pp.97-105
• /
• 2009

물 흡수선량표준을 기반으로 하는 선량측정 프로토콜에서는 전자선의 선질결정 지표는 $R_{50}$이며, 선량측정의 정확성을 향상시키기 위하여 전자선의 기준 에너지가 $R_{50}$>7 $g/cm^2$ (E${\gtrsim}$16 MeV)인 고에너지 전자선에서 표준기관에 소급성이 있는 원통형이온함의 물흡수선량교정계수을 이용한 평행평판형이온함의 교차교정을 권고하고 있다. 그러나 이러한 조건을 만족하는 고에너지 전자선은 모든 치료기관에서 보유하기가 어려운 실정이다. 따라서 본 연구에서는 평행평판형이온함의 교차교정 시 16 MeV 이상의 고 에너지 전자선뿐 아니라 12 MeV 이하의 전자선 에너지에서 얻은 평행평판형이온함의 교정계수를 이용하여 선량차이를 각각 비교하였다. 전자선 선량측정은 PTW 30013, Wellhofer FC65G의 Farmer형 원통형이온함과 PTW 34001, Wellhofer PPC40의 Roos형 평행평판형이온함을 이용하였으며 물팬텀내 기준깊이 $Z_{ret}=0.6R_{50}-0.1$(cm)에 원통형이온함과 평행평판형이온함을 같은 위치에 놓고 교차교정을 실시하였다. 교차교정 선질 20 MeV에서 결정된 교정계수를 적용한 물 흡수선량과 전자선에너지 12, 16 MeV에서의 물 흡수선량 차이는 0.2% 이내로 비교적 잘 일치하는 연구결과를 보였다. 그러므로 교차교정 선질 차이에 의한 흡수선량 값 상호 비교한 결과는 측정 불확도내에서 잘 일치하고 있어 각 기관에서 보유하고 있는 의료용가속기의 최고 전자선 선질에서의 교차교정도 유효하다고 사료된다.

• Journal of the Korean Data and Information Science Society
• /
• 제28권2호
• /
• pp.349-359
• /
• 2017

본 논문에서는 미국 국립암연구소의 SEER 프로그램에서 제공하는 우측 대장암 3기 자료에 Cox 비례위험모형을 적합하여 생존분석을 하였다. 우측 대장암 3기 환자의 사망률에 유의한 영향을 미치는 공변량들을 파악하고, 관심있는 공변량들을 가진 환자의 생존율을 추정하였다. Schoenfeld 잔차를 기반한 검정과 Schoenfeld 잔차 도표, $log[-log\{{\hat{S}}(t)\}]$ 도표를 이용하여 분석에 사용된 공변량들이 비례위험 가정을 만족함을 확인하였다. 적합된 Cox 비례위험모형의 타당성을 검증하기 위해 10-fold 교차 검증을 이용하여 calibration 도표와 시간에 의존하는 ROC 곡선 아래 면적을 계산하였다. 이를 통해 적합된 Cox 비례위험모형의 타당성을 확인하였다.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.80-87
• /
• 2007

This paper will suggest that the 1 cross orthogonal loop type sensor improves on the orthogonal loop form sensor-head, which is available a calibration of the linear birefringence, when a fiber optic current sensor was composed. An output characteristics of the 1 cross orthogonal loop form, a general closed loop form, the orthogonal loop form are compared by the IEC(International Electrotechnical Commission) 60044-8 standard, and the state of polarization is compared with three forms. As a result, when the closed loop form was changed to the orthogonal loop form, retardation decreased 15.3[%]. When the closed loop form was changed to the 1 cross orthogonal loop type, the retardation decreased 33.8[%]. As a result of the Faraday Effect measurement, the 1 cross orthogonal loop form has the highest output characteristic and the lowest error ratio. It met the 0.5 class of the IEC 60044-8 standard. Thus, in application of the 1cross orthogonal loop form, the possibility to develop high reliability fiber optic current sensors that have a high output and stable error ratio rises is increased.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.863-868
• /
• 2006

The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of sulfite and sulfide is described. This method is based on the difference between the rate of the reaction of sulfide and sulfite with Malachite Green in pH 7.0 buffer solution and at 25 ${^{\circ}C}$. The absorption kinetic profiles of the solutions were monitored by measuring the decrease in the absorbance of Malachite Green at 617 nm in the time range 10-180 s after initiation of the reactions with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 24 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.030-1.5 and 0.030-1.2 $\mu$g m$L ^{-1}$ for sulfite and sulfide, respectively. The proposed method was successfully applied to simultaneous determination of sulfite and sulfide in water samples and whole human blood.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.372-374
• /
• 2009

In this research, an obstacle avoidance method is proposed. The common usage of a robot is indoor and the obstacles to the indoor robot is studied. The accurate detection of direction after overcoming the obstacles is necessary for performance of autonomous navigation and mission project. The sensors such as Laser, Ultrasound, PSD can be used to measure the obstacles. In this research, a PSD sensor is used to detect obstacles. It detects the height and width of obstacles located on the floor. Before measuring the obstacles, a calibration of the sensor was done and it produced a better accuracy. We have plotted an error graph using data obtained from the repeated experiments. The graph is fitted to a polynomial curve. The polynomial equation is used for the robot navigation. And in this research, a model of the error of the direction of the robot after overcoming obstacles was obtained also. The prototype of the obstacle and the error of the direction after overcoming the obstacles are modelled using a neural networks. The input of the neural network composed with the height of the obstacles, the speed of robot, the direction of wheels and the error of the direction. To implement the suggested algorithm, we set up a robot which is operated by a notebook computer. Experiment showed the suggested algorithm performed well.

• 한국초지조사료학회지
• /
• 제34권3호
• /
• pp.214-218
• /
• 2014

This study was conducted to assess the feasibility of near-infrared reflectance spectroscopy (NIRS) as a rapid and reliable method for the estimation of crude protein (CP) fractions in forage legume mixtures (sudangrass and pea mixture, and kidney bean and potato mixture). A total of 178 samples were collected and their spectral reflectance obtained in the range of 400~2,500 nm. Of these, 50 samples were selected for calibration and validation, and 35 samples were used for calibration of the data set, and the modified partial least square regression (MPLSR) analysis was performed. The correlation coefficient ($r^2$) and the standard error of cross-validation (SECV) of the calibration models in the CP fractions, A, B1, B2, B3, and C, were 0.94 (1.05), 0.92 (0.74), 0.96 (0.95), 0.91 (0.42), and 0.83 (0.38), respectively. Fifteen samples were used for equation validation, and the $r^2$ and the standard error of prediction (SEP) were 0.87 (1.45), 0.91 (0.49), 0.94 (1.13), 0.36 (0.96), and 0.74 (0.67), respectively. This study showed that NIRS could be an effective tool for the rapid and precise estimation of CP fractions in forage legume mixtures.

• 응용통계연구
• /
• 제23권4호
• /
• pp.759-765
• /
• 2010

In this paper, two new inverse regression methods are introduced. One is a distance based method, and the other is a likelihood based method. While a model is fitted by minimizing the sum of squared prediction errors of y's and x's in the classical and inverse methods, respectively. In the new distance based method, we simultaneously minimize the sum of both squared prediction errors. In the likelihood based method, we propose an inverse regression with Arnold-Beaver Skew Normal(ABSN) error distribution. Using the cross validation method with an asymmetric real data set, two new and two existing methods are studied based on the relative prediction bias(RBP) criteria.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.235-241
• /
• 2007

This paper proposes a self-calibration method of robots those are used in industrial assembly lines. The proposed method is a position compensation using laser sensor and vision camera. Because the laser sensor is cross type laser sensor which can scan a horizontal and vertical line, it is efficient way to detect a feature of vehicle and winding shape of vehicle's body. For position compensation of 3-Dimensional axis, we applied block interpolation method. For selecting feature point, pattern matching method is used and 3-D position is selected by Euclidean distance mapping between 462 feature values and evaluated feature point. In order to evaluate the proposed algorithm, experiments are performed in real industrial vehicle assembly line. In results, robot's working point can be displayed 3-D points. These points are used to diagnosis error of position and reselecting working point.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.206.2-206.2
• /
• 2014

Recently, particle induced X-ray emission (PIXE) analysis system was installed at the 2MV ion acceleration system in Korea institute science and technology (KIST). This installation is for complement to low atomic resolution of heavy atoms at Rutherford backscattering spectrometry (RBS) system. For quantitative analysis, a mass calibration of the PIXE set-up has been done with thin film standards and. The GUPIX software package has been used to process the PIXE spectra and the results are compared with the values from RBS system. Therefore, the instrumental constant H (solid angle and correction factor) is determined relying completely on the GUPIX data base (cross-sections, fluorescence and Coster-Kronig probabilities, stopping powers and attenuation coefficients) for a large set of elements. These H values can be used in future analysis.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.231-235
• /
• 1998

We have made the cross calibration in terms of space reflectance between POLDER and OCTS sensors on board ADEOS satellite, using the POLDER and OCTS data acquired simultaneously on April 24, 1997. The space reflectance values for the same target computed from the POLDER and OCTS data are in very good agreement, when we adopted the new calibration coefficients of OCTS suggested by the vicarious experiment by NASDA. Then, we estimated aerosol parameters for several target areas (two areas in the Sea of Japan and three in the Pacific Ocean) from ADEOS/POLDER's directional reflectance and polarization data in 760nm and 865nm bands. A single atmospheric layer model with an isotropic Gaussian type ocean surface (Cox-Munk model) was assumed in this study.