• 제목/요약/키워드: Cross-anisotropy

검색결과 74건 처리시간 0.027초

미시역학을 이용한 사질토의 이방적 변형 특성의 해석 (Micromechanical analysis on anisotropic deformation of granular soils)

  • 정영훈;정충기
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.129-136
    • /
    • 2004
  • Anisotropic characteristics of deformation are important to understand the particular behavior in the pre-failure state of soils. Recent experiments shows that cross-anisotropic moduli of granular soils can be expressed by functions of normal stresses in the corresponding directions, which is closely linked to micromechanical characteristics of particles. Granular soils are composed of a number of particles so that the force-displacement relationship at each contact point governs the macroscopic stress-strain relationship. Therefore, the micromechanical approach in which the deformation of granular soils is regarded as a mutual interaction between particle contacts is one of the best ways to investigate the anisotropic deformation of soils. In this study, a numerical program based on the theory of micromechanics is developed. Modified Hertz-Mindlin model is adopted to represent the force-displacement relationship in each contact point for the realistic prediction of anisotropic moduli. To evaluate the model parameters, a set of analytical solutions of anisotropic moduli is derived in the isotropic stress condition. By comparing the analytical solutions with exact values, we confirm that the analytical solutions can be utilized to evaluate model parameters within the acceptable range of error of 10%.

  • PDF

비등방성 복합적층판 및 쉘의 고차전단변형을 고려한 비감쇄 동적응답 (Undamped Dynamic Response of Anisotropic Laminated Composite Plates and Shell Structures using a Higher-order Shear Deformation Theory)

  • 윤석호;한성천;장석윤
    • 한국강구조학회 논문집
    • /
    • 제9권3호통권32호
    • /
    • pp.333-340
    • /
    • 1997
  • 본 연구에서는 복합재료로 구성된 복합적층판 및 쉘에 대하여 3차 전단 변형이론을 이용한 변위를 가정하여 단순지지 경계조건을 만족하는 변위형상함수를 퓨리예급수로 전개하고 동적 평형 방정식을 유도하여 뉴마크의 수치적분법을 사용하여 단면특성계수, 재료의 특성, 층의 배열에 따른 복합적층판 및 쉘의 비감쇄 동적응답특성을 연구하였다.

  • PDF

복합재료 회전축의 진동 및 안정성 해석 (Vibration and Stability Analysis of Composite Spinning Shafts)

  • 서정석;안창기;박상윤;송오섭
    • 한국소음진동공학회논문집
    • /
    • 제25권7호
    • /
    • pp.510-517
    • /
    • 2015
  • The free vibration and stability analysis of a spinning composite shaft modelled as a thin-walled closed beam is performed for several design parameters, such as ply angle, aspect ratio, and spin speed. The governing equations of spinning shafts based on the Timoshenko beam theory are derived via Hamilton's variational principle. Coriolis acceleration and anisotropy of constituent materials are incorporated in the derivation. The equations of motion are then transformed to the standard form of an eigenvalue problem for free vibration and stability analysis. Analytical results both for uniform circular cylindrical shaft and rectangular cross-section shaft are obtained by using extended Galerkin method, and the results are compared with those from FEM ANSYS analysis for a verification.

다층탄성해석과 유한요소법을 사용한 골재기층의 거동분석 (Analysis of Aggregate Base Behavior Using Layered Elastic and Finite Element Methods)

  • 김성희
    • 한국도로학회논문집
    • /
    • 제11권1호
    • /
    • pp.195-201
    • /
    • 2009
  • 이 논문에서는 다층탄성해석과 유한요소법을 사용하여 도로설계를 위한 도로내 주요 변형률을 계산하여 유사한 결과치를 양산하는 경우를 비교 분석하였다. 비록 유한요소법이 보다 나은 모델이라는 것이 입증되긴 했지만, 다층탄성해석 프로그램이 간편성으로 인해 여전히 도로설계를 위해 많이 사용되어 지고 있으므로 다층탄성해석 프로그램을 사용한 주요 변형률의 예측이 시급한 실정이다. 이 연구에서는 KENLAYER프로그램을 사용하여, 비선형 이방성 기층거동을 고려한 유한요소법을 사용했을 때 얻어지는 도로내 주요 변형을 예측할 수 있는 분석기법이 소개된다.

  • PDF

Modelling and FEA-simulation of the anisotropic damping of thermoplastic composites

  • Klaerner, Matthias;Wuehrl, Mario;Kroll, Lothar;Marburg, Steffen
    • Advances in aircraft and spacecraft science
    • /
    • 제3권3호
    • /
    • pp.331-349
    • /
    • 2016
  • Stiff and light fibre reinforced composites as used in air- and space-craft applications tend to high sound emission. Therefore, the damping properties are essential for the entire structural and acoustic engineering. Viscous damping is an established and reasonably linear model of the dissipation behaviour. Commonly, it is assumed to be isotropic and constant over all modes. For anisotropic materials it depends on the fibre orientation as well as the elastic and thermal material properties. To portray the orthogonal anisotropic behaviour, a model for unidirectional fibre reinforced plastics (frp) has been developed based on the classical laminate theory by ADAMS and BACON starting in 1973. Their approach includes three damping coefficients - for longitudinal damping in fibre direction, damping transversal to the fibres and shear based dissipation. The damping of a laminate is then accumulated layer wise including the anisotropic stiffness. So far, the model has been applied mainly to thermoset matrix materials. In this study, an experimental parameter estimation for different thermoplastic frp with angle ply and cross ply layups was carried out by measuring free vibrations of cantilever beams. The results show potential and limits of the ADAMS/BACON damping criterion. In addition, a possibility of modelling the anisotropic damping is shown. The implementation in standard FEA software is used to study the influence of boundary conditions on the damping properties and numerically estimate the radiated sound power of thin-walled frp parts.

MEASUREMENT OF THE D-D NEUTRON GENERATION RATE BY PROTON COUNTING

  • Kim, In-Jung;Jung, Nam-Suk;Choi, Hee-Dong
    • Nuclear Engineering and Technology
    • /
    • 제40권4호
    • /
    • pp.299-304
    • /
    • 2008
  • A detection system was set up to measure the neutron generation rate of a recently developed D-D neutron generator. The system is composed of a Si detector, He-3 detector, and electronics for pulse height analysis. The neutron generation rate was measured by counting protons using the Si detector, and the data was crosschecked by counting neutrons with the He-3 detector. The efficiencies of the Si and He-3 detectors were calibrated independently by using a standard alpha particle source $^{241}Am$ and a bare isotopic neutron source $^{252}Cf$, respectively. The effect of the cross-sectional difference between the D(d,p)T and $D(d,n)^3He$ reactions was evaluated for the case of a thick target. The neutron generation rate was theoretically corrected for the anisotropic emission of protons and neutrons in the D-D reactions. The attenuations of neutron on the path to the He-3 detector by the target assembly and vacuum flange of the neutron generator were considered by the Monte Carlo method using the MCNP 4C2 code. As a result, the neutron generation rate based on the Si detector measurement was determined with a relative uncertainty of ${\pm}5%$, and the two rates measured by both detectors corroborated within 20%.

직물유리섬유강화 집성재의 물리적 특성(제2보) - 박리 및 흡습성 - (Physical Properties of Fabric E-Glass Fiber Reinforced Laminated Timber (II) - Peeling and vapor adsorption properties -)

  • 정인석;이원희;김종만
    • Journal of the Korean Wood Science and Technology
    • /
    • 제31권5호
    • /
    • pp.35-42
    • /
    • 2003
  • 본 연구는 전보(정 등, 2002)에서 제조된 직물유리섬유 강화집성재의 박리 및 수분 흡착특성을 조사해 보기 위해서 실시되었다. 침지 박리시험에서, 3가지 형태의 소재 모두 박리를 나타내지 않았지만, control재를 제외한 모든 형태의 소재는 삶음 박리에서 박리가 발생하였다. 수분흡착시험은 40℃, 상대습도 90% 조건에서 48시간동안 실시하였다. 횡단면 흡습성은 모든 소재에서 다르지 않았다. 유리섬유로 된 소재에서 방사단면과 접선단면은 control재와 비교하여 수분 흡착이 지연되었다. 수분흡착 이방성에서, 유리섬유 함입된 소재는 적은 수분흡착을 나타내었다.

Effect of flexure-extension coupling on the elastic instability of a composite laminate plate

  • H. Mataich;A. El Amrani;J. El Mekkaoui;B. El Amrani
    • Structural Engineering and Mechanics
    • /
    • 제90권4호
    • /
    • pp.391-401
    • /
    • 2024
  • The present study focuses on the effect of extension-bending coupling on the elastic stability (buckling) of laminated composite plates. These plates will be loaded under uni-axial or bi-axial in-plane mechanical loads, especially in the orthotropic or anti-symmetric cross-angle cases. The main objective is to find a limit where we can approximate the elastic stability behavior of angularly crossed anti-symmetric plates by the simple behavior of specially orthotropic plates. The contribution of my present study is to predict the explicit effect of extension-flexion coupling on the elastic stability of this type of panel. Critically, a parametric study is carried out, involving the search for the critical buckling load as a function of deformation mode, aspect ratio, plate anisotropy ratio and finally the study of the effect of lamination angle and number of layers on the contribution of extension-flexure coupling in terms of plate buckling stability. We use first-order shear deformation theory (FSDT) with a correction factor of 5/6. Simply supported conditions along the four boundaries are adopted where we can develop closed-form analytical solutions obtained by a Navier development.

신규 유사세라마이드의 합성과 그 특성 (Synthesis of Novel Pseudo-ceramide and Its Properties)

  • 김진국;김경태;박선희;이방용;김기호;김영희
    • 대한화장품학회지
    • /
    • 제34권1호
    • /
    • pp.43-50
    • /
    • 2008
  • 세라마이드는 콜레스테롤, 지방산과 함께 각질층을 구성하는 주요성분으로 각질층의 피부장벽 기능에 중요한 역할을 하며, 아토피 피부염, 건선, 건성습진, 주부습진 등과 같은 염증성 피부질환 방지에 도움이 되는 것으로 알려져 있다. 본 연구에서 2-(2-amino-ethylamino)-ethanol(AEEA)을 출발물질로 하여 신규 유사세라마이드 BPC-16을 합성하고, 그 물리화학적 성질과 화장품의 신규 소재로 활용하기 위하여 세포독성, 보습, 각질제거효능 등을 평가하였다. 합성된 BPC-16을 이용하여 콜레스테롤, 스테아린산을 포함하는 에멀젼을 제조했고, 편광현미경에서 'Maltese Cross'를 확인함으로써 BPC-1이 라멜라 에멀젼을 형성함을 확인하였다. 단층배양세포와 삼차원배양세포에서의 세포독성 실험에서 BPC-16은 보습과 피부손상회복 효과를 보이는 10 mM 이하의 농도에서 독성이 없음을 확인하였다. BPC-16의 보습효능을 확인하기 위하여 Vapormeter와 Corneometer를 이용하여 임상실험을 실시하였으며, 우수한 효과를 확인할 수 있었다. 또한, 피부손상에 대한 회복효과와 Visioscan을 이용한 각질량의 변화 실험에서도 우수한 효과를 확인하였다.

성장 중인 쥐에서 음식물의 경도가 하악 과두의 해면골에 미치는 영향 : 미세전산화 단층촬영을 이용한 연구 (THE EFFECTS OF DIETARY CONSISTENCY ON THE TRABECULAR BONE ARCHITECTURE IN GROWING MOUSE MANDIBULAR CONDYLE : A STUDY USING MICRO-CONFUTED TOMOGRAPHY)

  • 윤석희;이상대;김정욱;이상훈;한세현;김종철
    • 대한소아치과학회지
    • /
    • 제31권2호
    • /
    • pp.228-235
    • /
    • 2004
  • 하악 과두의 발달과 증식은 측두하악관절 부위의 생역학적 환경의 변화에 따라 변경될 수 있다. 이 부위에 전달되는 생역학적 하중은 섭취하는 음식물의 경도를 다르게 함으로써 변화시킬 수 있다. 이번 연구의 목적은 성장 중인 쥐에서 부드러운 음식물의 섭취에 의해 저작력을 변화시키는 것이 하악 과두의 해면골의 형태를 변화시킬 수 있는지 미세전산화 단층촬영을 이용하여 분석하는 것이었다. 생후 21일 된 C57BL/6 쥐 36마리를 무작위로 두 그룹으로 나누었다. 8주 동안 대조군의 쥐들은 일반적인 딱딱한 덩어리의 사료를, 실험군의 쥐들은 덩어리의 사료를 잘게 갈은 후 물과 섞어 부드럽게 만들어 먹였다. 또한 실험군의 쥐들의 하악 절치를 일주일에 두 번씩 잘라서 짧게 만들었다. 8주 후 모든 쥐들을 희생하여 우측 하악 과두를 준비하였다. 미세전산화 단층촬영과 삼차원 영상 분석프로그램을 이용하여 하악 과두 해면골의 bone volume(BV), bone surface(BS), total volume(TV) bone volume fraction(BV/TV), surface to volume ratio(BS/BV), trabecular thickness(Tb. Th.), structure model index(SMI)와 degree of anisotropy(DA)를 측정하고 이들 값으로부터 trabecular number(Tb. N.)와 trabecular separation (Tb. Sp.)을 계산하였다 미세전산화 단층영상을 얻은 후 하악 과두의 조직 표본을 만들었다. 연구 결과는 다음과 같았다. 1. Bone volume fraction(BV/TV), trabecular thickness(Tb. Th.)와 trabecular number(Tb. N.)가 대조군에 비해 부드러운 음식을 먹인 실험군에서 유의하게 감소되었다(p<0.05). 2. Trabecular separation(Tb. Sp.)은 부드러운 음식을 먹인 실험군에서 유의하게 증가하였다(p<0.05). 3. Surface to volume ratio(BS/BV), structure model index(SMI), degree of anisotropy (DA)는 두 군 사이에 유의한 차이를 보이지 않았다(p>0.05). 4. 조직 절편을 관찰한 결과, 부드러운 사료를 먹인 실험군에서 하악 과두의 연골층의 증식 층과 전체 두께가 상당히 감소하였다.

  • PDF