• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.45-51
• /
• 2002

To achieve the lightweight and robust design of a structure, it is requested to design a structure and its control system simultaneously, which is called as the combined optimal design. A constant-cross-sectional area cantilever beam was chosen as an example for the applying the optimum design method. An initial load and a time varying disturbance were applied at the free end of the beam. Sliding mode control was selected due to its insensitiveness to the disturbance compared with other modes. It is known that the sliding mode control is robust to the disturbance and the uncertainty only if a matching condition is met, after giving a switching hyper plane. In this study, the optimum method was used for the design of the switching hyper plane and the objective function of the optimum switching hyper plane was assumed to be the objective one of the control system. The total weight of the structure was treated as a constraint and the cross sectional areas of the beam were considered as design variables, which means a nonlinear programming problem. The sequential linear programming method was applied to solve it. As a result of the optimum design, the effect of attenuating vibrations has been improved obviously. Moreover, lightweight design of the structure became possible from the relationship of the weight of the structure and the control objective function.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.487-494
• /
• 2004

Resizing techniques have been recognized as practical methods for drift design of high-rise building since sensitivity analysis and iterative structural analysis are not required in implementation. In the techniques, the amount of material of a memberin a building for resizing is determined in terms of cross-sectional areas and sectional inertia moments as design variables. In this study, five drift design methods are developed by considering design variable linking strategy and fomulating resizing algorithm in terms of material properties of shear walls as a design variable. The developed methods are applied to the drift design of 20-story frame-RC shear wall structure, and then evaluated in the view points of practicality and efficiency.

• 가정간호학회지
• /
• 제29권3호
• /
• pp.288-300
• /
• 2022

Purpose: This study aimed to investigate the association of social participation and depressive symptoms with health-related quality of life (HRQoL) among older adults living in urban and rural areas. Methods: This secondary, cross-sectional study was conducted with a total of 66,765 adults aged ≥65 years (urban-26,485 and rural-40,280) who participated in the household and individual surveys of the Korea Community Health Survey 2019. Data on the main study variables including social participation, depressive symptoms, and HRQoL were collected from August 16 to October 31, 2019. Multiple linear regression was used to identify the factors affecting HRQoL in urban and rural older adults. Results: The proportion of social participation (χ²=354.69, p<.001) and the level of HRQoL (χ²=12.06, p<.001) were significantly higher in older adults living in urban area than those in rural area. However, there was no significant difference in depressive symptoms between older adults living in urban and rural areas. Multiple linear regression analysis showed that social participation and depressive symptoms were significant predictors of HRQoL in both urban and rural older adults. Conclusion: Our main finding highlights that active participation in social activities and management of depressive symptoms in older adults regardless of living arrangements are crucial to improve HRQoL in later life. Interventions to increase social participation include early assessment of depressive symptoms in the community to promote HRQoL. More longitudinal studies are needed to identify the factors associated with HRQoL between older adults living in urban and rural areas while considering neighborhood environment and living arrangements.

• 한국동물위생학회지
• /
• 제32권3호
• /
• pp.219-225
• /
• 2009

A cross sectional survey was conducted to determine the seroprevalence of brucellosis in cattle in Bangladesh Agricultural University (BAU) Veterinary Clinics, in BAU Dairy Farm and Vabokhali from June 2008 to November 2008. A total of 200 serum samples were collected from BAU Veterinary Clinic, from BAU Dairy Farm and Vabokhali. Among the serum samples 143 sera samples were collected from BAU Veterinary Clinic, 42 serum samples from BAU Dairy Farm and 15 serum samples from Vabokhali. Sera were separated from blood samples and tested with specific Brucella abortus antigen (BAA) test and B. melitensis antigen (BMA) test. The overall seroprevalence of brucellosis in cattle was 5% in BAA and 0.5% in BMA. It was observed that, a significant higher prevalence of B. abortus was found in female than male. An insignificant higher prevalence of brucellosis was found in adult cattle (aged above 5 years), in cross breed cattle, in cattle with grazing, cattle breed by natural breeding, and in pregnant cows. Although insignificant but a higher prevalence of brucellosis was found in aged cattle than young cattle, cross bred cattle, pregnant cattle than non pregnant cattle, cattle with grazing. A higher prevalence of brucellosis was found in female cattle than male.

• 한국지반신소재학회논문집
• /
• 제11권4호
• /
• pp.37-44
• /
• 2012

본 연구에서는 띠형 형태의 보강재에 대하여 신장성에 따른 인발저항 특성을 평가하기 위하여, 강재스트립 및 띠형 섬유보강재를 대상으로 대형인발시험을 수행하였다. 또한 약간의 지지저항이 함께 발현되는 돌기형 강재스트립 보강재의 인발시험 결과를 마찰저항 보강재의 결과와 비교하였다. 단면적이 작은 돌기형 강재스트립 보강재는 지지저항에 기인하여 마찰저항만으로 인발저항이 발현되는 보강재에 비하여 우수한 인발저항 특성을 갖는 것으로 확인되었다. 그리고 단면적이 유사한 마찰저항 보강재의 경우에는 신장성 보강재가 비신장성 보강재에 비하여 우수한 인발저항 특성을 나타내는 것으로 평가되었다.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.165-172
• /
• 2002

A reinforced concrete building neighboring in Pusan or Ulsan where is directly exposed to salt water contrasting with other in land areas contains much salt content percolated from the outside that the high salt content percolates and diffuses through the inside of reinforced concrete; therefore, an immovable tunic surrounding it begins to be destroyed and eroded with high speed. At the time, the cross-sectional area and volume expansion of re-bar reinforcing result in being cracks make a rapid progress gradually until they appear in the surface of the one, the phenomenon such as being a thin layer or falling off the part of it causes a lowering of its durability and might collapse the concrete construction. So far, we've investigated into salt content of reinforced concrete constructions neighboring in a seaside district and damage by carbonation, and we came to a conclusion as follows: $\circled1$ Under the oceanic circumstance a concrete construction is influenced by sea water directly that contains much amount of salt content contrasting with other constructions on inland areas. $\circled2$ Because of chloride penetration the carbonation of reinforced concrete made a rapid progress until more than the covering thickness of re-bar. $\circled3$ An old reinforced concrete building which has been piled up salt injury and proceeding the carbonation of its cross-sectional area. $\circled4$ According to rapidly cracking from the inside to surface of reiforced concrete, the phenomenon of being a thin layer or falling off the part of reinforced concrete results in a lowering of durability and shortening the life-time of concrete construction itself.

• 한국임상수의학회지
• /
• 제25권2호
• /
• pp.90-95
• /
• 2008

One fresh equine cadaver (two forelimbs) and five non-lamed thoroughbreds (ten sound forelimbs) were examined ultrasonographically through 5.0 MHz linear array transducer with a stand-off pad in palmar pastern region. The normal transverse ultrasonographic images of the superficial digital flexor tendon (SDFT), deep digital flexor tendon (DDFT), straight sesamoidean ligament (SSL), oblique sesamoidean ligament (OSL), and medium scutum could be identified at the region. The mean $\pm$ SD (min.$\sim$max. $mm^2$) of SDFT cross-sectional areas at P1A, P1B, P1C in the region were $110.00{\pm}5.38$ ($100{\sim}128$), $100.00{\pm}5.02$ ($90{\sim}111$), $114.00{\pm}3.33$ ($104{\sim}124$), respectively. The mean $\pm$ SD (min.$\sim$max. $mm^2$) of DDFT cross-sectional areas at each phalanx (P1A, P1B, P1C, P2A, P2B) were $136.00{\pm}4.83$ ($125{\sim}147$), $94.00{\pm}5.43$ ($85{\sim}108$), $99.00{\pm}4.87$ ($90{\sim}111$), $115.00{\pm}3.67$ ($108{\sim}124$), $135.00{\pm}3.65$ ($125{\sim}145$), respectively. The mean ratio of SDFT of P1B to DDFT was 0.74, 1.06, 1.01, 0.87, 0.74 at P1A, P1B, P1C, P2A, P2B, respectively.

• 지역사회간호학회지
• /
• 제27권2호
• /
• pp.95-105
• /
• 2016

Purpose: This study examined the characteristics differences associated with 1-year continuous smoking abstinence in Korean young adult and middle-aged male workers. Methods: 'Korea National Health and Nutrition Examination Survey (KNHANES)' is an ongoing surveillance system that assesses the health and nutritional status of Koreans. For a secondary analysis of cross-sectional data from KNHANES VI-1, this study selected 683 Korean male workers as a subpopulation, who were young adult or middle-aged. The subpopulation was composed of success or failure group of 1-year continuous smoking abstinence. Binomial logistic regression analysis was performed. Results: Success group was more likely to be older, live in urban areas, rate their health status as excellent or good, and have ever been diagnosed with hypertension than failure group. Additionally, Success group was less likely to have used electronic cigarettes (e-cigarettes), drink more than once a month, and have been exposed to secondhand smoking in workplace within a week. Conclusion: Developing smoking cessation programs requires consideration of resources in rural areas, promoting self-efficacy, restricting e-cigarettes and drinking, and promoting a smoke-free workplace.

• Nutrition Research and Practice
• /
• 제9권3호
• /
• pp.328-335
• /
• 2015

BACKGROUND/OBJECTIVES: Studies conducted in Western populations have suggested that dietary calcium may protect against metabolic abnormalities, but there is little evidence of this effect in Asians, who have relatively low calcium intake. We evaluated the cross-sectional relationship between dietary calcium and metabolic syndrome among Korean men and women aged 40 years and over. SUBJECTS/METHODS: A total of 6,375 subjects aged 40 years and over and were recruited between January 2005 and February 2010 from the baseline study of the Multi-Rural Communities Cohort Study in Rural Communities (MRCohort). A food frequency questionnaire was used to collect dietary information. Metabolic syndrome was defined using the modified criteria published in the Third Report of the National Cholesterol Education Program Adult Treatment Panel. RESULTS: Calcium intake was related inversely to metabolic syndrome in women (P-value = 0.0091), but not in men (P = 0.1842). Among metabolic components, high waist circumference (WC) (P = 0.0426) and high blood glucose (P = 0.0027) in women and hypertriglyceridemia (P = 0.0017) in men were inversely correlated with calcium intake. Excluding those who used calcium or multinutrient supplements did not attenuate the relationship between dietary calcium and metabolic abnormalities. CONCLUSION: Dietary calcium intake from foods may be inversely related to metabolic syndrome, WC, and blood glucose among women in rural areas of Korea.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권2호
• /
• pp.100-105
• /
• 2017

Objectives: Localization of the mandibular canal (MC) and measurement of the height and width of the available alveolar bone at the proposed implant site in the posterior segment of the mandible using cone-beam computed tomography (CBCT) in patients with a single missing tooth. Materials and Methods: A cross-sectional study was performed where CBCT scans of the patients with a single missing tooth in the posterior segment of the mandible-premolar, I (1st) molar, and II (2nd) molar were used. The scans were assessed using OnDemand3D software (version 1.0; CyberMed Inc., Seoul, Korea) for localization of the MC asnd remaining alveolar bone both vertically (from the superior position of the MC to the crest of the alveolar ridge) and horizontally (buccolingual, 3 mm below the crest of the alveolar ridge). The findings were statistically analyzed using independent t-test. Results: A total of 120 mandibular sites (40 sites for each of the three missing premolar, I molar, and II molar) from 91 CBCT scans were analyzed. The average heights (from the alveolar crest to the superior margin of the MC) at the premolar, I molar, and II molar areas were $15.19{\pm}2.12mm$, $14.53{\pm}2.34mm$, and $14.21{\pm}2.23mm$, respectively. The average widths, measured 3 mm below the crest of the alveolar ridge, at the premolar, I molar, and II molar areas were $6.22{\pm}1.96mm$, $6.51{\pm}1.75mm$, and $7.60{\pm}2.08mm$, respectively. There was no statistically significant difference between males and females regarding the vertical and horizontal measurements of the alveolar ridges. Conclusion: In the study, the measurements were averaged separately for each of the single missing teeth (premolar, I molar, or II molar), giving more accurate information for dental implant placement.