• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.709-718
• /
• 2019

Cephalopods, such as the Japanese flying squid Todarodes pacificus and golden cuttlefish Sepia esculenta, are an important food source for all toothed whales, particularly bottlenose dolphins in costal and offshore waters around the Korean Peninsula. A controlled laboratory experiment was conducted to investigate the broadband acoustic backscattering from live individuals of these two cephalopod species using linear chirp signals (100-200 kHz). The backscattered echo signal was measured at about 1° intervals from -45° (head down) to +45° (head up) in the dorsal plane. The species-specific, frequency-dependent scattering characteristics were investigated by comparing the relationship between the wavelength-normalized backscattering cross-section (σ/λ²) and the wavelength-normalized fish length L/λ for each species. The estimated σ/λ² value for Japanese flying squid was 9.51 at an L/λ range of 12.79-30.27 (mean, 21.26). This was approximately 7% of the σ/λ² value (136.1) for golden cuttlefish at an L/λ range of 9.07-25.49 (mean, 15.77).

• Cross-Cultural Studies
• /
• v.35
• /
• pp.215-235
• /
• 2014

The purpose of this paper look at the basis of the cultural differences of Korean and Japan by comparing the craftsmanship. Korean craftsmanship and master craftsman making traditional handcrafts and artwork would die out at a critical moment. The craftsmanship and system could not be established because of discrimination in the traditional four classes of society( scholars, farmers, artisans and tradesmen), invasions of other countries and discontinuity of tradition from modernization. On the contrast, in Japan, it was possible to establish traditional handcrafts and artworks, technique and craftsmanship with apprentice system and various social privilege and treatment even in the same traditional four classes of society ( scholars, farmers, artisans and tradesmen). It was common to pass down the family business for a hundreds of years with self respect between Japanese master craftsmen and lots of people succeed the family business will now. Japanese craftsmanship is originated from 'worship to god' Medieval Japanese believed that the thing changes human mind, artistic talent, masterpieces and faith were connected to sacred power. Therefore, master craftsmen and their works were also made by the power of god. In this context, craftsmen were protected and treated in socially and nationally. It is that the social treatments and supports in national level and their own pride and continuous training of techniques and abilities as the main driving force to maintain the craftsmanship in Japan. Korea has the sale level of competitive tradition and technique in comparison any other countries. Japanese craftsmanship study will be a critical data in the protection and maintenance of Korean traditional and technique.

• Cross-Cultural Studies
• /
• v.36
• /
• pp.61-95
• /
• 2014

At the turn of the century in which European colonialism was reaching its zenith and modernization was gathering speed, public museums were institutionalized. This paper looks into the part these European modern museums played in territorializing academic disciplines like anthropology and art history. The museums to deal with are the British Museum and the National Gallery in London, Mus?e du Louvre in Paris, and Museumsinsel in Berlin. Rather than in-depth detailed analysis of each museum, the aim is to explore the ways in which these museological institutions interacting with modern disciplines in the wider colonial context objectified other cultures and formulated a framework of the world through classification and comparison of material things, on the basis of the judgement of their artistic values. This exploration is also to rethink theoretical positions and perspectives on the museum in Korea. It is remarkable in Europe that such academic fields as history, art history, anthropology and cultural studies look for new possibilities of museology in conjunction with the recent proliferation of studies on the museum as a medium to construct and deconstruct knowledge. Meanwhile, the mammoth European museums which are often considered a stronghold of museology advocate the 'universal museum' themselves, quite the modern idea but in a revised rendering. Under these circumstances, this paper seeks to shed light on the definition of the museum as an arena in which scholarly discourses about art, culture and history can be created and contested, on the effectiveness of the museum as a communication medium in a postcolonial era, and on the need to pay trans-disciplinary attention to the museum in its broadest sense.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.711-726
• /
• 2013

The purpose of this study was to investigate how congruently the learning objectives of Earth Science I textbooks match the 2009 revised Earth Science curriculum. For this purpose, we classified the learning objectives of curriculum and textbooks were into three factors including ability, cross-cutting concepts, and behavioral verbs. The text data were analyzed using the semantic network analysis method. The results are as follows. The learning objectives of textbooks with regard to ability factors mainly emphasized the cognitive and affective domain. In addition, the ability of inquiry performance was emphasized in the learning objective of the curriculum. The textbooks used various sub-frame of cross-cutting concepts in comparison with the curriculum. Both textbooks and curriculum used the term 'comprehension' the most as behavioral verbs. However, most behavioral verbs just remained at the level of cognitive system.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1062-1073
• /
• 2004

We describe a looper controller design for a hot strip finishing mill in steel plants. The main function of the looper system is to balance the mass flow of the strip by accumulating material in the middle of the stands. Another function is to control the strip tension which influences the width of the strip. To ensure strip quality, it is very important to control the tension of the hot strip finishing mill. However, because there is a mutual interaction between the looper angle and the strip tension, it is difficult to control the looper system. Previous researches examined only the operation of a single stand. But it is not sufficient to examine the operation and effect of whole stands because the operation is wholly interdependent. In this paper, we present a full model of the hot strip finishing mill in order to more effectively control strip tension. We propose several control methods for the full-stand hot strip finishing mill, denoted as conventional PI, PI with cross gain, and coefficient diagram method (CDM) PID control. In the real plants, there are some problems by using higher order controllers such as LQ, LQG and H$\_$$\infty$/. By comparison, the PID controller is very simple and easy to apply to all real plants. To that end, we present our findings on PID controls and their potential use in the hot strip finishing mill.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.500-506
• /
• 1994

For comparison of beef quality, four kinds of beef (Korean native cattle beef, dairy cattle beef, imported beef, cross-bred beef) were investigated through tenderness, juiciness and flavor related components measurement and organoleptic tests. Flavor related chemical components such as NPN, IMP, free fatty acid and free amino acids were analyzed, water holding capacity, contents of hydroxyproline and intramuscular fat were measured for evaluation of beef tenderness. Instron was also used for measuring beef tenderness as an objective method. Triangle test and descriptive analysis test were conducted for comparison and evaluation of preference of various beef samples. In hardness analysis using Instron, imported and cross-bred beefs had higher value than that of Korean native cattle or dairy cattle beef. Water holding capacity and pH of Korean cattle beef was higher than that of others. The intramuscular fat content of Korean cattle beef was highest, so it was expected juicier than other beef. In flavor related compound analysis, NPN content of Korean native cattle beef was the lowest, which shows it spent the least time among sample meats after slaughter. IMP, hypoxantine and inosine were most abundant in Korean native cattle beef. In free amino acids analysis showed that the proportion of basic acid and aromatic acid content of Korean native cattle beef was highest, whereas that of sulfur containing amino acid of imported beef was highest. TBA value of Korean native cattle beef was the lowest, and analysis of fatty acid composition revealed that the proportion of unsaturated fatty acid of Korean native cattle beef was higher than imported and dairy cattle beef, but similar to cross-bred beef. Organoleptic test was performed by triangle test and descriptive analysis. In triangle test, most panelist could distinguish Korea native cattle beef from imported beef and cross-bred beef, imported beef from cross-bred beef. In descriptive analysis which relys on subjective standards of panelists, there was no difference among beef in aroma, flavor and tenderness except juiciness. Even though contents of non volatile flavor compounds in Korean native cattle beef were higher than those of other beef samples, there were no significant differences in subjective panel test. The results showed that Korean consumers do not have common standards for beef quality evaluation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.77-87
• /
• 2004

It is important for hydrographers to extract the accurate cross section of a river for the hydrographical analysis of the topography. Aerial photographs were used to extract the cross section of a river for the advantages of the accuracy and economical efficiency in this study, while the direct measurement has been used in existing studies. An ortho-rectified photo map using imageries taken by the PKNU 2 (High-resolution, multi-spectral, aerial photographic system developed by our laboratory) was generated using the surveyed data and a digital map. The cross section of a river that was obtained from the ortho-rectified by the surveyed Kinematic data of GPS was compared with the result using ImageStation stereo-plotter of corp. Z/I Imaging. As a result of this study, the RMSE in the ortho-rect process using the surveyed GPS data was lowered as from 5.5788 pixels (about 2m) to 2.84 (about 1m) in comparison with it in the process using a digital map. The surveyed kinematic GPS in extraction of the cross section of a river was excellent as 6.6cm of the planimetric and precision in the confidence level of 95%. The correlation coefficient between the result from the using stereo-plotter and the extraction of cross section of a river using aerial photos was 0.8 hydrographical acquisition of it using PKNU 2 imagery will be possible.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.269-273
• /
• 2016

Presently, the world population of the elderly is growing. By improving health hygiene and welfare indicators, mortality and birth rates decrease and life expectancy increases, making the present century the century of elderly. Aging is one of the main risk factors for development of cancer, which itself is the second cause of death in old people. This study was conducted to assess the prevalence of cancer in the elderly covered by the Islamic Republic of Iran Broadcasting (IRIB) insurance program and to obtain suitable programs for cancer screening and early detection, increase patient survival, improve elderly care and to reclaim the cost of treatment in comparison to the national and international statistics. This is a cross-sectional study conducted on all elderly patients diagnosed with malignancy based on their pathology reports. In this study, of the total 75,500 patients covered by IRIB insurance, 17.2% belonged to the elderly group, males accounting for 53.3%. The most common cancers in old men were prostatic cancer (61.3%), colon cancer (10.3%) cancer of the hematologic system, bladder cancer (9.6%), lung cancer (9.1%), thyroid cancer (3.9%) and brain tumors (1.3%). In the elderly women, the most common cancers were breast cancer (80.1%), colon cancer (5.1%), thyroid cancers (4.4%), bladder and hematologic system malignancies (3.6), lung cancer (2.9%) and brain tumors (0.7%). In addition, the prevalence of cancer was almost the same as national and international statistics. With the exception of non-melanoma skin cancer no difference was shown in prevalence of cancer between IRIB elderly patients and the other groups of cancer patients in Iran.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.507-511
• /
• 2008

A new mungbean cultivar "Sohyeon" (Vigna radiata (L.) Wilczek) was bred from the cross between "Suwon28" and "KM94004" at the Jeollanamdo Agricultural Research & Extension Services (JARES) in 2006. "Sohyeon" has erect type, heart shape leaflet, green hypocotyl, black and straight pod when matured, and dull green seed surface. This new cultivar shows 42 g per a thousand seed weight. And sprout yield was up to 9% more than that of comparison cultivar "Owool". It contains 12.0, 12.4 mg/g of vitexin and isovitexin, respectively, which was shown about 38, 31% more than comparison cultivar. It shows resistance to mungbean mottle virus, cercospora leaf spot, and powdery mildew in the normal cultivate condition. The average yield of this cultivar shows 1.62 ton/ha, which was 7% more than comparison cultivar.

• Genomics & Informatics
• /
• v.5 no.4
• /
• pp.174-178
• /
• 2007

The earliest stages of mammalian embryogenesis are governed by the activity of maternally inherited transcripts and proteins. Cytoplasmic polyadenylation of selected maternal mRNA has been reported to be a major control mechanism of delayed translation during preimplantation embryogenesis in mice. The presence of cis-elements required for cytoplasmic polyadenylation (e.g., CPE) can serve as a useful tag in the screening of maternal genes partaking in key functions in the transcriptionally dormant egg and early embryo. However, due to its relative simplicity, UA-rich sequences satisfying the canonical rule of known CPE consensus sequences are often found in the 3'-UTR of maternal transcripts that do not actually undergo cytoplasmic polyadenylation. In this study, we developed a method to confirm the validity of candidate CPE sequences in a given gene by a multiplex comparison of 3'-UTR sequences between mammalian homologs. We found that genes undergoing cytoplasmic polyadenylation tend to create a conserved block around the CPE, while CPE-like sequences in the 3'-UTR of genes lacking cytoplasmic polyadenylation do not exhibit such conservation between species. Through this cross-species comparison, we also identified an alternative CPE in the 3'-UTR of tissue-type plasminogen activator (tPA), which is more likely to serve as a functional element. We suggest that verification of CPEs based on sequence conservation can provide a convenient tool for mass screening of factors governing the earliest processes of mammalian embryogenesis.