• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.503-511
• /
• 2013

The humidifying supply gas is important in terms of the performance efficiency and membrane life improvement of a PEM fuel cell. A planar membrane humidifier is classified as a cross-flow and counter-flow type depending on the flow direction, and heat and mass transfer occur between the plate and the membrane. In this study, the changes in heat and mass transfer for various inlet temperatures and flow rates are compared according to the flow direction by using the sensible and latent ${\varepsilon}$-NTU method. The obtained results indicate that the counter flow shows higher heat and mass transfer performance than the cross flow at a low flow rate, and the difference in performance decreases as the flow rate increases. Furthermore, changes in the mass transfer performance decrease considerably with a nonlinear increase in the inlet temperature, and variations of the heat transfer performance are small.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.133-140
• /
• 2002

This article presents an application of a large-scale structural mixing model(Broadwell et at. 1984) to the blowout of turbulent reacting cross flow jets. Experimental observations, therefore, aim to identify the existence of large-scale vortical structure exerting an important effect upon the flame stabilization. In the analysis of common stability curve, it is seen that the phenomenon of blowout are only related to the mixing time scale of the two flows. The most notable observation is that the blowout distance is traced at a fixed positions according to the velocity ratio at all times. Measurements of the lower blowout limits in the liftable flame are qualitatively in agreement with the blowout parameter $\xi$, proposed by Broadwell et al. Good agrement between the results calculated by a modified blowout parameter $\xi$'and the present experimental results confirms the important effect of large-scale structure in the stabilization feature of blowout.

• Journal of Information Processing Systems
• /
• v.5 no.3
• /
• pp.151-158
• /
• 2009

This paper proposes a utility-based data rate allocation algorithm to provide high-quality mobile video streaming over femtocell networks. We first derive a utility function to calculate the optimal data rates for maximizing the aggregate utilities of all mobile users in the femtocell. The total sum of optimal data rates is limited by the link capacity of the backhaul connections. Furthermore, electromagnetic cross-talk poses a serious problem for the backhaul connections, and its influence passes on to mobile users, as well as causing data rate degradation in the femtocell networks. We also have studied a fixed margin iterative water-filling algorithm to achieve the target data rate of each backhaul connection as a counter-measure to the cross-talk problem. The results of our simulation show that the algorithm is capable of minimizing the transmission power of backhaul connections while guaranteeing a high overall quality of service for all users of the same binder. In particular, it can provide the target data rate required to maximize user satisfaction with the mobile video streaming service over the femtocell networks.

• Advances in nano research
• /
• v.12 no.3
• /
• pp.253-261
• /
• 2022

Numerical modelling of an integrated Carbon NanoTube (CNT) membrane is only achievable if probable deformations and realistic alterations from a perfect CNT membrane are taken into account. Considering the possible forms of CNTs, bending is one of the most probable deformations in these high aspect ratio nanostructures. Hence, investigation of effect associated with bent CNTs are of great interest. In the present study, molecular dynamics simulation is utilized to investigate fluid flow dynamics in deformed CNT membranes, specifically when the tube cross section is not affected. Bending in armchair (5,5) CNT was simulated using Tersoff potential, prior to flow rate investigation. Also, to study effect of inclined entry of the CNT to the membrane wall, argon flow through generated inclined CNT membranes is examined. The results show significant variation in both cases, which can be interpreted as counter-intuitive, since the cross section of the CNT was not deformed in either case. The distribution of fluid-fluid and fluid-wall interaction potential is investigated to explain the anomalous behavior of the flow rate versus bending angle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.667-673
• /
• 2017

We investigated the temperature uniformity in an anode-supported solid oxide fuel cell, using the open source computational fluid dynamics (CFD) toolbox, OpenFOAM. Numerical simulation was performed in three different flow paths, i.e., co-flow, counter-flow, and cross-flow paths. Gas flow in a porous electrode was calculated using effective diffusivity while considering the effect of interconnect rib. A lumped internal resistance model derived from a semi-empirical correlation was implemented for the calculation of electrochemical reaction. The result showed that the counter-flow path displayed the most uniform temperature distribution.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.35-41
• /
• 2012

The Numerical simulation was performed on the flow field around the two-dimensional rectangular bluff body in order to complement the previous experimental results of the bluff body stabilized flames [1]. For both fuel ejection configurations against an oxidizer stream, the flame stability was affected mainly by vortex structure and mixing field near bluff body. FDS(Fire Dynamic Simulator) based on the LES(Large Eddy Simulation) was employed to clarify the isothermal mixing characteristic and wake flow pattern around bluff body. The air used atmosphere and the fuel used methane. The result of counter flow configuration shows that the flow field depends on air velocity but the mixing field is influenced on the fuel velocity. At low fuel velocity the fuel mole fraction is below the flammable limit and hence the mixing is insufficient to react. Therefore, as the result, the flame formed at low fuel velocity is characterized by non-premixed flames. For the flow field of co-flow configuration, flame stability was affected by fuel velocity as well as air velocity. the vortex generated by fuel stream has counter rotating direction against the air stream. Therefore, the momentum ratio between air and fuel stream was important to decide the flame blow out limit, which is result in the characteristic of the partially premixed reacting wake near extinction.

• The Korean Journal of Pharmacology
• /
• v.32 no.3
• /
• pp.433-444
• /
• 1996

We describe a novel approach to evaluate quantitatively the amounts of denatured proteins in cells upon heat exposure. A thiol compound, diamide [azodicarboxylic acid bis (dimethylamide)] causes protein cross-linking with exposed sulfyhydryl residues of denatured proteins. Since denatured proteins expose normally well-hidden sulfhydryl groups, these will be preferentially cross-linked by diamide. Thus diamide acts to 'trap' denatured proteins. We observed that protein aggregates (high molecular weight protein aggregates, HMA) appeared on SDS-polyacrylamide gels run under non-reducing conditions and that the amount of HMA can be quantified by scanning the gels using a gas flow counter. Heating cells followed by a fixed dose of diamide exposure resulted in HMA increases in a heat-dose dependent manner, demonstrating that the quantitation of HMA could serve as a measure of heat-denatured proteins. We compared thermotolerant and nontolerant cells and found decreased HMA in tolerant cells upon heat treatment. As an attempt to examine the kinetics of protein renaturation (or 'repair'), we measured the amounts of aggregates formed by the addition of diamide at various times after heat shock. Such experiments demonstrate an equally rapid disappearance of HMA in previously unheated and in thermotolerant cells. Levels of HMA in tolerant cells increased significantly after electroporation of HSP70 specific mAbs, suggesting an involvement of HSP70 in reducing HMA levels in thermotolerant cells upon heat exposure. Immunoprecipitation studies using anti-HSP70 antibody indicated an association of HSP70 with heat-denatured proteins. Our results suggest that heat induces protein denaturation, and that elevated level of HSP70 present in thermotolerant cells protects them by reducing the level of protein denaturation rather than by facilitating the 'repair' (or degradation) process.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.271-277
• /
• 2014

Hydraulic reciprocating seals have been widely used to prevent fluid leakage and to provide lubricant film on counter surface in various hydraulic system. The degradation of the seal may cause the catastrophic failure of the hydraulic system. To assess the durability of the seals and the compatibility with counter surface, accelerated life testing (ALT) has been typically employed from industry. However, ALT often takes up to a few months to cause a failure of the seals, and therefore, there is a need to develop more efficient ALT methods. In this work, the degradation characteristics of polyurethane (PU) seals from field test are investigated and they are compared to those from the component and bench tests, with an aim to contribute to the development of ALT method. From the comparison of the cross-sectional profiles of the sealing surface of the PU specimens before and after the tests, both wear and compression set are found to be responsible for degradation of the PU seals. It is also shown that the major wear mechanisms of the PU seals from the field is abrasive wear and formation of pits. The component and bench tests performed in this work are shown to reproduce such wear mechanisms, and therefore, those test methods can be used as an ALT method for PU seals. In particular, the bench test proposed in this work may be effectively utilized to assess the durability and the compatibility of the seals with the counter surface. The results of this work are expected to aid in the design of ALT for PU seal.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.182-189
• /
• 2011

This research suggests a way of hygienic space planing of the customer space in the university student restaurant of E University in Seoul. For this study. the behavior observation in the restaurant was conducted in order to analyze the sequence of customer behavior related space planing applying HACCP (Hazard Analysis And Critical Control Point). Also the survey was conducted to analyze opinions of customers about hygiene of the space. The results of the analyses of the observation and the survey were similar in terms of hygiene. In conclusion, for hygienic space planing of the customer space in restaurant, the space circulation should be planned according to the hygienic sequence of customer behavior. The spaces in restaurant should be divided into two areas: the clean area and the contaminated area to prevent cross-contamination. The clean area, such as spaces preparing dishes and food including water and table hall where customers eat, should be separated from the contaminated area such as the spaces where waste is handled and where dirty dishes are kept. In order to prevent cross-contamination, hygiene facility to remove contamination should be located before going to the clean area. More specifically, the hygiene facility should be located between a cash counter and a space preparing dishes so that customers can wash their hands before they touch dishes. Space arrangement with feed-back process to check the possible points of cross-contamination and correct space arrangement until the possibility of cross-contamination is removed in the restaurant.

• Cross-Cultural Studies
• /
• v.19
• /
• pp.149-179
• /
• 2010

This article is concerned about the symbolic meaning of the transvestism Renaissance perspective through analysis of Triumph Over Persecution work and The Merchant of Venice, and Jealous Ioan Tornese. The transvestism is frequently present in the comedies of the golden age. A woman author Maria de Zayas has a special interest in female identity with critical and defying view. Also the subject of the transvestism in Spanish literature originated in Italian tradition. In Italian literature, there were two types of disguised women, who urge for love and warrior-heroine(amazon). Both types are also listed in Spanish literature. The dress-crossing heroine of Triumph Over Persecution displays a type of heroine, who corrects a male prejudice and reset a harmonious order. Shakespeare is also one of the Renaissance writers under the influence of the Italian Renaissance novel. Heroine of Merchant of Venice symbolizes a triumphant challenge against the blocks of the patriarchal system. In spite of the social system blocks, cross-dressing women may receive in the patriarchal scenes without problems. Based on the notion of paradox and irony, the Italian novel reflects popular psychology of the time when the link between the internal identity and social outside puts into question. The cross-dressing Torneses' wife, symbolizes the mockery or renaissance deception. Their deception emphasis on an ironic way in the point view of inhuman man who consider women material belongs to the man without any free-will. The costume of the characters make it possible to change their original identity into the other. From this point of view, we can say that the transvestism in these works could be interpreted in two ways: first, the destruction of the traditional categories of women's identity and second, the burlesque contempt on the patriarchal renaissance society.