• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2717-2724
• /
• 2020

Silicon, especially silicon in the form of SiO₂, is a major component of rocks. Final spent fuel storages, which are being designed, are located in suitable rock formations in the Earth's crust. Reduction of the uncertainty of silicon neutron scattering and capture is needed; improved silicon evaluations have been recently produced by the ORNL/IAEA collaboration within the INDEN project. This paper deals with the nuclear data validation of that evaluation performed at the LR-0 reactor by means of critical experiments and measurement of reaction rates. Large amounts of silicon were used both as pure crystalline silicon and SiO₂ sand. The critical moderator level was measured for various core configurations. Reaction rates were determined in the largest core configuration. Simulations of the experimental setup were performed using the MCNP6.2 code. The obtained results show the improvement in silicon cross-sections in the INDEN evaluations compared to existing evaluations in major libraries. The new Thermal Scattering Law for SiO₂ published in ENDF/B-VIII.0 additionally reduces the discrepancy between calculation and experiments. However, an unphysical peak is visible in the neutron spectrum in SiO₂ obtained by calculation with the new Thermal Scattering Law.

• Nuclear Engineering and Technology
• /
• v.44 no.2
• /
• pp.207-224
• /
• 2012

This article discusses selects of some outstanding problems in nuclear reactor analysis, with proposed approaches thereto and numerical test results, as follows: i) multi-group approximation in the transport equation, ii) homogenization based on isolated single-assembly calculation, and iii) critical spectrum in Monte Carlo depletion.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.933-940
• /
• 2024

A macroscopic cross section generation model was developed for the conceptual horizontal, compact high temperature gas reactor (HC-HTGR). Because there are many sources of spectral effects in the design and analysis of the core, conventional LWR methods have limitations for accurate simulation of the HC-HTGR using a neutron diffusion core neutronics simulator. Several super-cell model configurations were investigated to consider the spectral effect of neighboring cells. A new history variable was introduced for the existing library format to more accurately account for the history effect from neighboring nodes and reactivity control drums. The macroscopic cross section library was validated through comparison with cross sections generated using full core Monte Carlo models and single cell cross section for both 3D core steady-state problems and 2D and 3D depletion problems. Core calculations were then performed with the AGREE HTR neutronics and thermal-fluid core simulator using super-cell cross sections. With the new history variable, the super-cell cross sections were in good agreement with the full core cross sections even for problems with significant spectrum change during fuel shuffling and depletion.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.163-167
• /
• 2013

Objective of the study was to compare reflectance spectrum in the blade and the vein parts of cabbage and kale leaves. A total 6 cabbage and kale leaves were taken from a plant factory in Chungnam National University, Korea. Spectra data were collected with a UV/VIS/NIR spectrometer (model: USB2000, Ocean Optics, FL, USA) in the wavelength region of 190 - 1130 nm. Median filter smoothing method was selected to preprocess the obtained spectra data. We computed reflectance difference by subtraction of averaged spectrum from individual spectrum. To estimate correlation at different parts of cabbage and kale leaves, cross - correlation method was used. Differences between cabbage and kale leaves are clearly manifested in the green, red and near - infrared ranges. The percent reflectance of cabbage leaves in the NIR wavelength band was higher than that of kale leaves. Reflectance in the blade part was higher than in the vein part by 18%. Reflectance difference in the different parts of cabbage and kale leaves were clear in all of the wavelength bands. Standard deviation of reflectance difference in the vein part was greater for kale, while the value in the blade part was greater for cabbage leaves. Standard deviation of cross - correlation increased from 0.092 in the first sensor (UV/VIS) and 0.007 in the second sensor (NIR) to 0.099 and 0.015, respectively.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1486-1494
• /
• 2018

Based on the semiclassical theory of chaotic scattering, Tanner et al. [J. Phys. B 40, F157 (2007)] proposed the fluctuation in the partial photoionization cross section of helium below the double-ionization threshold would show the same characteristics as in the total cross section, predicting that the Fourier spectrum of the fluctuation reveals peaks at the classical actions of closed triple collision orbits and the amplitude of the fluctuation decreases algebraically as the energy approaches the double-ionization threshold. In that paper, however, the predictions were not clearly confirmed due to the lack of experimental data with sufficient accuracy. So instead, we calculate the partial photoionization cross sections of collinear eZe helium for the energy range from the single-ionization threshold $I_{20}$ to $I_{32}$ in order to numerically confirm the predictions. Analysis of the fluctuation in the partial cross section shows that the predictions are indeed valid. Our findings mean that the fluctuation in the partial photoionization cross section can be described by classical triple collision orbits in the semiclassical limit. Thus it explains in a natural way the mirroring and mimicking structures observed in cross section signals for different ionization channels.

• Wind and Structures
• /
• v.35 no.6
• /
• pp.369-383
• /
• 2022

Wind tunnel experiment was carried out to study the cross-wind layer forces on a square cross-section building model using a synchronous multi-pressure sensing system. The stationarity of measured wind loadings are firstly examined, revealing the non-stationary feature of cross-wind forces. By converting the measured non-stationary wind forces into an energetically equivalent stationary process, the characteristics of local wind forces are studied, such as power spectrum density and spanwise coherence function. Mathematical models to describe properties of cross-wind forces at different layers are thus established. Then, a conditional simulation method, which is able to ex-tend pressure measurements starting from experimentally measured points, is proposed for the cross-wind loading. The method can reproduce the non-stationary cross-wind force by simulating a stationary process and the corresponding time varying amplitudes independently; in this way the non-stationary wind forces can finally be obtained by combining the two parts together. The feasibility and reliability of the proposed method is highlighted by an ex-ample of across wind loading simulation, based on the experimental results analyzed in the first part of the paper.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.36-41
• /
• 1998

The cross-flow fan performance and its sound noise characteristics are predicted by computational methods. The unsteady incompressible Navier-Stokes equations in moving coordinates are solved by a SMAC method on unstructured triangular meshes, using a sliding mesh technique at the interface between the domain rotating with blades and the rest stationary part. The computationally predicted fan performance was favorably compared with experiment, and some numerical aspects of simulating the cross-flow fan are discussed. With the computed unsteady flow field, aeroacoustic sound noise of the fan is predicted by the Lighthill-Curie equation. The unsteady surface pressure fluctuations on stabilizer enables a prediction of BPF noise of the uniform pitch blade fan quite accurately. The aeroacoustic sound noise characteristics of both uniform and random pitch blade fans are also examined by SPL spectrum analysis.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.78-82
• /
• 2004

The cross-flow fan which is used for air-conditioner indoor units were studied experimentally. The recent trend shows that the room air-conditioners need to be good-looking. According to the visual design concepts the intake regions of the fan can vary, which leads to the loss of the performance and the increase of the noise of the fan. In order to optimize the performance of the fan and minimize the aerodynamic noise for the system, the performance characteristics and the noise of the cross-flow fan have been investigated at the various conditions of the intake region of the unit.

• Nuclear Engineering and Technology
• /
• v.3 no.2
• /
• pp.77-97
• /
• 1971

The experimental fission cross-section data of U-238, Np-237 and Th-232, published up to the end of 1970, are reviewed and analyzed between their respective thresholds and 20.0 MeV. The results of a statistical analysis of the available data, performed with a weighted Least-squares Orthogonal Polynomial Pitting computer programme are presented in the form of point-wise cross-section values together with their uncertainties, and in the form of graphs of the fitted curves with an indication of a region of 95% statistical confidence level. An estimate of the fission spectrum weighted average cross-sections and their respective uncertainties is also given.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1874-1875
• /
• 2007

전력선 통신(Power Line Communication)은 전력선과 연결되어 있는 디바이스들을 간단히 제어하기 위한 기술로 제안 되었으며, 홈오토메이션, 원격 검침(AMR) 분야에서 많이 사용되고 있다. 최근에는 스마트 홈, 유비쿼터스와 관련해 다양한 홈 네트워크 시스템들이 제안되면서 이들 시스템을 효과적으로 구현할 수 있는 방안으로 전력선 통신기술이 많이 제안되고 있다. 전력선 통신은 많은 유용성에도 불구하고 전력선 채널에 대한 정확한 채널 모델링과 전력선 모뎀의 성능에 관해서는 많은 문제점을 나타내고 있다. 본 논문에서는 전력선 통신을 위한 전송선로의 주파수에 대한 잡음과 임피던스 특성 및 전력선 채널에 데이터 신호를 Chirp-SS(Spread Spectrum) 신호로 맵핑하여 채널의 Zero Cross Point 구간에 전송하였을 때의 시뮬레이션 결과와 설계된 FPGA 보드를 비교분석 하였다. 채널 모델은 배경 잡음과 할로겐 잡음, 전송선로의 감쇄 특성만을 고려하였으며, 전력선 채널 상에서의 Zero Cross Point를 이용한 전력선 통신 모뎀의 성능을 분석하였다.