• Archives of Pharmacal Research
• /
• v.9 no.1
• /
• pp.39-43
• /
• 1986

Bovine serum albumin microspheres containing cytarabine were prepared using cross-linking agent, formaldehyde. The shape and the size distribution of them were observed. The shape of them was spherical and the susrface was compact and smooth. The size distribution of them was affected by dispersion forces during emulsfication. The release of cytarabine from albumin microspheres was dependent upon cross-linking time, amount of cross-linking agent and drug/albumin ratio. However, the difference of drug release by the dispersion forces was not great. After release test, the shape of albumin microspheres was nonspherical and the albumin matrix seemed to be a little relaxed. The degradation tests of albumin microspheres by the proteolytic enzyme showed that albumin microspheres were progressively digested according to the cross-linking degree.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.251-263
• /
• 2013

The internal reflux effect on dialysis through the retentate phase of a countercurrently cross-flow rectangular module is investigated. Theoretical analysis of mass transfer in cross-flow devices with or without recycling is analogous to heat transfer in cross-flow heat exchangers. In contrast to a device without reflux, considerable mass transfer is achievable if cross-flow dialyzers are operated with reflux, which provides an increase in fluid velocity, resulting in a reduction in mass-transfer resistance. It is concluded that reflux can enhance mass transfer, especially for large flow rate and feed-concentration operated under high reflux ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.516-519
• /
• 1999

XLPE (Cross-Linked Polyethylene) which has good electric and physical characteristic is ideal material for Insulating material with force high volumetric resistance arid high dielectric constant. We study abort electric characteristics of XLPE by DCP and TMPTA content ration. DCP (Dicumylperoxide), which was used cross-linked agent contest, was changed from 1.0 to 0.5phr. TMPTA (Trimethyl-olpropane), which was used co cross-linked agent content, was changed from 0.5 to 1.5phr. Thermal analysis by DSC in order to observe tendency of Tg according to DCP and TMPTA content. Specimen 3 that content DCP 2.0phr and TMPTA 0.5phr has the highest value Breakdown strength cf specimen 3 (DCP 2.Ophr, TMPTA 1.0phr) is the highest, value and it increased in specific inductive capacity. This due to difference from cross-linked state by DCP and TMPTA content ratio.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.426-432
• /
• 2012

In this paper, we investigate the signal to noise ratio (SNR) estimation performance of Cross quadrature amplitude modulation (QAM), which is being used for asymmetric digital subscriber line (ADSL), very high bit rate digital subscriber line (VDSL), and digital video broadcasting - cable (DVB-C), and has been found to be useful in adaptive modulation and blind equalization. At first, the symbol error rate (SER) performance of Cross QAM is analyzed in Rayleigh fading channel. Then we suggest error vector magnitude (EVM) based SNR estimation utilizing the selected constellation points having different types of decision region from one another, and verify that SNR estimation performance of each points have different performance pattern through simulation. From the simulation results, it has been found that when suggested selected constellation points are used for SNR estimation in Cross QAM, estimation performance is enhanced in additive white Gaussian noise (AWGN) channel or Ricean fading channel.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.369-373
• /
• 2000

This paper describes a design for microstrip EMC cross dipole array antenna with circular polarization. To realize the wide bandwidth and circular polarization, the electromagnetic-coupled cross dipole is used. To obtain the uniform aperture illumination, offset technique for array is adopted. In 20-element array design, the calculated axial ratio and gain are about 0.1 dB and 9.9 dBi at 12GHz, respectively. The frequency characteristics of a fabricated 20-element array antenna are measured. The calculated results agree well with the measured ones.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.519-528
• /
• 2016

In order to achieve fast computational speed with good visual quality of output video, we propose a frequency domain based new fractal video compression scheme. Normalized cross correlation is used to find the structural self similar domain block for the input range block. To increase the searching speed, cross correlation is implemented in the frequency domain using FFT with one computational operation for all the domain blocks instead of individual block wise calculations. The encoding time is further minimized by applying rotation and reflection DFT properties to the IFFT of zero padded range blocks. The energy of overlap small size domain blocks is pre-computed for the entire reference frame and retaining the energies of the overlapped search window portion of previous adjacent block. Quadtree decompositions are obtained by using domain block motion compensated prediction error as a threshold to control the further partitions of the block. It provides a better level of adaption to the scene contents than fixed block size approach. The result shows that, on average, the proposed method can raise the encoding speed by 48.8 % and 90 % higher than NHEXS and CPM/NCIM algorithms respectively. The compression ratio and PSNR of the proposed method is increased by 15.41 and 0.89 dB higher than that of NHEXS on average. For low bit rate videos, the proposed algorithm achieve the high compression ratio above 120 with more than 31 dB PSNR.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.248-255
• /
• 2003

This paper presents a fingerprint recognition algorithm using cross-correlation function. This algorithm consists of minutiae extraction, minutiae alignment and minutiae matching, where we propose a new minutiae alignment method. In our alignment method, the rotation angle between two fingerprints is obtained by using cross-correlation function of the minutia directions, thereafter the displacement is obtained from the rotated fingerprint. This alignment method is capable of finding rotation angle and displacement of two fingerprints without resorting to exhaustive search. Our fingerprint recognition algorithm has been tested on fingerprint images captured with inkless scanner. The experiment results show that 17.299% false rejection ratio(FRR) at 2.086% false acceptance ratio(FAR).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.643-651
• /
• 2001

Fused vertical directional coupler switches (FVCSs) with switching operation induced section (SOIS) and extinction ratio enhanced section (ERES) are proposed. In these FVCSs, switching operation is achieved by changing the refractive indices of both cores in SOIS and improvement of extinction ratios larger than 30dB for both cross and bar states is achieved by controlling the asymmetry of refractive indices between both cores in ERES. In addition, the design guidelines to have high extinction ratios larger than 30dB with large tolerances of the refractive index of cores are presented.

• Membrane and Water Treatment
• /
• v.2 no.2
• /
• pp.105-119
• /
• 2011

This study presents the tests of an Immersed Membrane BioReactor (IMBR) equipped with a draft tube and focuses on the influence of hydrodynamic conditions on membrane fouling in a pilot-scale using a hollow fiber membrane module of ZW-10 under ambient conditions. In this system, the cross-flow velocities across the membrane surface were induced by a cylindrical draft-tube. The relationship between cross-flow velocity and aeration strength and the influence of the cross-flow on fouling rate (under various hydrodynamic conditions) were investigated using Multi-Dimension Scaling (MDS) analysis. MDS technique is especially suitable for samples with many variables and has relatively few observations, as the data about Membrane Bio-Reactor (MBR) often is. Observations and variables are analyzed simultaneously. According to the results, a specialized form of MDS, CoPlot enables presentation of the results in a two dimensional space and when plotting variables ratio (output/input) rather than original data the efficient units can be visualized clearly. The results indicate that: (i) aeration plays an important role in IMBR performance; (ii) implementing the MDS approach with reference to the variables ratio is consequently useful to characterize performance changes for data classification.

• Wind and Structures
• /
• v.1 no.1
• /
• pp.43-57
• /
• 1998

A three-degree-of-freedom base hinged assembly (BHA) for aeroelastic model tests of tall building was developed. The integral parts of a BHA, which consists of two perpendicular plane frames and a flexural pivot, enable this modeling technique to independently simulate building translational and torsional degree-of-freedom. A program of wind tunnel aeroelastic model tests of the CAARC standard tall building was conducted with emphasis on the effect of (a) torsional motion, (b) cross-wind/torsional frequency ratio and (c) the presence of an eccentricity between center of mass and center of stiffness on wind-induced response characteristics. The experimental results highlight the significant effect of coupled translational-torsional motion and the effect of eccentricity between center of mass and center of stiffness on the resultant rms acceleration responses in both along-wind and cross-wind directions especially at operating reduced wind velocities close to a critical value of 10. In addition, it was sound that the vortex shedding process remains the main excitation mechanism in cross-wind direction even in case of tall buildings with coupled translational-torsional motion and with eccentricity.