• Steel and Composite Structures
• /
• v.13 no.1
• /
• pp.71-89
• /
• 2012

The paper investigates beam lateral buckling stability according to linear and non-linear models. Closed form solutions for single-symmetric cross sections are first derived according to a non-linear model considering flexural-torsional coupling and pre-buckling deformation effects. The closed form solutions are compared to a beam finite element developed in large torsion. Effects of pre-buckling deflection and gradient moment on beam stability are not well known in the literature. The strength of singly symmetric I-beams under gradient moments is particularly investigated. Beams with T and I cross-sections are considered in the study. It is concluded that pre-buckling deflections effects are important for I-section with large flanges and analytical solutions are possible. For beams with T-sections, lateral buckling resistance depends not only on pre-buckling deflection but also on cross section shape, load distribution and buckling modes. Effects of pre-buckling deflections are important only when the largest flange is under compressive stresses and positive gradient moments. For negative gradient moments, all available solutions fail and overestimate the beam strength. Numerical solutions are more powerful. Other load cases are investigated as the stability of continuous beams. Under arbitrary loads, all available solutions fail, and recourse to finite element simulation is more efficient.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.23-29
• /
• 2013

PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.294-301
• /
• 2014

This study focuses on analysis and comparison of entropy generation in various cross-sectional ducts along with fully developed laminar flow and constant uniform wall heat flux. The obtained results were compared in ducts with circular, semicircular, and rectangular with semicircular ends, equilateral triangular, and square and symmetrical hexagonal cross-sectional areas. These results were separately studied for aspect ratio of different rectangular shapes. Characteristics of fluid were considered at average temperature between outlet and inlet ducts. Results showed that factors such as Reynolds number, cross section, hydraulic diameter, heat flux and aspect ratio were effective on entropy generation, and these effects are more evident than heat flux and occur more in high heat fluxes. Considering the performed comparisons, it seems that semicircular and circular cross section generates less entropy than other cross sections.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.1
• /
• pp.55-63
• /
• 2020

PURPOSE: This study examined the effects of handgrip exercise, which was started two weeks after surgery for shoulder rotator cuff repair, on the extent of muscle activation around the shoulder and the cross-sectional area of the supraspinatus muscle. METHODS: Among patients diagnosed with rotator cuff rupture by an orthopedic surgeon and rotator cuff repair was performed using an arthroscope, 28 were selected as subjects. These subjects were allocated randomly to the experimental group and control group with 14 subjects in each group. An electromyogram was measured as a measure of the extent of muscle activation around the shoulder for a total of six times (%RVC). The cross-sectional area of the supraspinatus muscle was measured before and after the rotator cuff repair by magnetic resonance imaging. RESULTS: The extent of muscle activation in accordance with time in both the experimental group and control group displayed significant differences in various muscles including the anterior deltoid, pectoralis major, upper trapezius and infraspinatus muscle(p<.05). A significant difference in the variation of the cross-sectional area of the supraspinatus muscle was observed between the experimental group and the control group(p<.05). CONCLUSION: Handgrip exercise helps rehabilitate the shoulder joint at the acute stage after rotator cuff repair when assertive exercise therapy cannot be applied.

• Environmental Mutagens and Carcinogens
• /
• v.16 no.2
• /
• pp.83-87
• /
• 1996

This study was performed by the sister chromatid exchanges (SCEs) to investigate the effects of Aphidicolin (APC) or 2, 4-dinitrophenoi (DNP) on cross-adaptive response to ultraviolet radiation (UV) or ethyl methanesulfonate (EMS) in Chinese hamster ovary (CHO) cells. The pretreatment with 1 J/m$^2$ UV decreased the yield of SCEs induced by subsequent treatment with 8 mM EMS in CHO cells. And the treatment with 10 $\mu$g/ml APC or 50 $\mu$M DNP during incubation after pretreatment with 1 J/m$^2$ UV increased the yield of SCEs induced by 8 mM EMS. The pretreatment with 2 mM EMS decreased the yield of SCEs induced by subsequent treatment with 5 J/m$^2$ UV. The treatment with 10 $\mu$g/ml APC during incubation after 2 mM EMS increased the yield of SCEs induced by 5 J/m$^2$ UV. These results suggest that APC and DNP inhibit cross-adaptive response to pretreatment with UV and subsequent treatment with EMS, and also cross-adaptive response to pretreatment with EMS and subsequent treatment with UV is inhibited by APC in CHO cells.

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.151-155
• /
• 2014

This study compares the effects of flow on oil and suspended solids removal efficiencies in circular enhanced gravity plate separator equipped with coalescence medium. Coalescence medium acts to capture rising oil droplets and settling solid particles and assist in the coalescence of oil and coagulation of solid. The circular separator uses an upflow center-feed perforated-pipe distributor as the inlet. The co-current flow is achieved using 4 increasing sizes of frustum, whereas cross flow uses inclined coalescence plates running along the radius of the separator. The different arrangement gave the cross flow separator a higher coalescence plan area per operational volume, minimal and constant travelling distance for the oil droplets and particles, lower retention time, and higher operational flowrate. The cross flow separator exhibited 6.04% and 13.16% higher oil and total suspended solids removal efficiencies as compared to co-current flow.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.19-24
• /
• 2000

Effects of the cross-sectional dimension and moisture profile of wood specimens on the ultrasonic sound velocities of radiata pine heartwood and sapwood. Each moisture profile model specimen was made by composing five wood pieces with various moisture contents. As the cross-sectional dimensions decreased the ultrasonic velocities of both heartwood and sapwood decreased by 4~8%. In the ultrasonic signals transmitted through the specimens low frequency components more dominated than high frequency components as the dimension of cross section increased. The specimens with the same average MCs and different moisture profiles showed different ultrasonic velocities. By plotting the ultrasonic velocities against the average moisture contents of the inner three pieces of the moisture profile model specimens it was revealed that three distinct plot patterns existed.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.239-244
• /
• 2015

Chemical mechanical polishing (CMP) is one of the most important processes for enabling sub-14 nm semiconductor manufacturing. Moreover, post-CMP defect control is a key process parameter for the purpose of yield enhancement and device reliability. Due to the complexity of device with sub-14 nm node structure, CMP-induced defects need to be fixed in the CMP in-situ cleaning module instead of during post ex-situ wet cleaning. Therefore, post-CMP in-situ cleaning optimization and cleaning efficiency improvement play a pivotal role in post-CMP defect control. CMP in-situ cleaning module normally consists of megasonic and brush scrubber processes. And there has been an increasing effort for the optimization of cleaning chemistry and brush scrubber cleaning in the CMP cleaning module. Although there have been many studies conducted on improving particle removal efficiency by brush cleaning, these studies do not consider the effects of brush contamination. Depending on the process condition and brush condition, brush cross contamination effects significantly influence post-CMP cleaning defects. This study investigates brush cross contamination effects in the CMP in-situ cleaning module by conducting experiments using 300mm tetraethyl orthosilicate (TEOS) blanket wafers. This study also explores brush pre-treatment in the CMP tool and proposes recipe effects, and critical process parameters for optimized CMP in-situ cleaning process through experimental results.

• KDI Journal of Economic Policy
• /
• v.39 no.4
• /
• pp.69-94
• /
• 2017

This paper re-examines the impacts an institutional arrangement may have on labour market outcomes such as the employment and unemployment rates. Based on the results from a generalized econometric model, the generosity of unemployment insurance benefits, organized labour and active labour market policy have effects on a labour market in line with previous findings. However, taxes on labour and the degree of employment protection are found to affect neither the employment rate nor the unemployment rate. Thus, some findings in this paper validate earlier findings, whereas others do not.

• Wind and Structures
• /
• v.4 no.1
• /
• pp.45-62
• /
• 2001

This paper is focused on the torsional effects that are induced on bridge piers by unbalanced wind buffeting on the deck during double cantilever erection stages. The case of decks with variable cross section is considered in particular as this characteristic is typical of most frame bridges that are built by the cantilever method. The procedure outlined in the paper is basically an application of the method that Dyrbye and Hansen (1996) have illustrated for decks with constant cross section. This format was chosen because it is suitable for design purposes and may easily be implemented in structural codes. As a complement, the correspondence with the format that is adopted in the Canadian code (NBCC 1990) for the gust factor is established, which might be useful to bridge designers used to the North-American approach to the gust effects on structures. Only alongwind turbulence and horizontal movements of the deck are considered. The combination of torsional and bending effects is also discussed and it is illustrated with an example of application.