• International Journal of Contents
• /
• 제11권1호
• /
• pp.15-20
• /
• 2015

The purpose of this research is to study methods for performing transition that have visual representation of corresponding animations with no bounce in subsequently recognized user information when attempting to interact with a virtual 3D character in real-time using user motion. If the transitions of the animation are needed owing to a variety of external environments, continuous recognition of user information is required to correspond to the motion. The proposed method includes linear interpolation of the transition using cross-fades and blending techniques. The normalized playing time of the source animation was utilized for automatically calculating the transition interpolation length of the target animation and also as the criteria in selecting the crossfades and blending techniques. In particular, in the case of blending, the weighting value based on the degree of similarity between two animations is used as a blending parameter. Accordingly, transitions for visually excellent animation are performed on interactive holographic projection systems.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.40-50
• /
• 2007

The present contribution describes the application of elliptic-blending second moment closure to predict the gas cooling process of turbulent super-critical carbon dioxide flow in a square cross-sectioned duct. The gas cooling process under super-critical state experiences a drastic change in thermodynamic and transport properties. Redistributive terms in the Reynolds stress and turbulent heat flux equations are modeled by an elliptic-blending second moment closure in order to represent strongly non-homogeneous effects produced by the presence of walls. The main feature of Durbin's elliptic relaxation second moment closure that accounts for the nonlocal character of pressure-velocity gradient correlation and the near-wall inhomogeneity guaranteed by the elliptic blending second moment closure.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.62-73
• /
• 1998

The aim of this work was to investigate the effects of pigment composition on the calendering response and structure of the coated paper. Calendering response of the coated paper was determined from the gloss values of the uncalendered and calendered coated papers, and the relationship between gloss and coating structure was discussed. The surface and cross section of the coating layer was observed using a scanning electron microscope to examine the coating structure. Coating layers were hardened in epoxy resin and polished with carbimet paper disc for preparing SEM samples. Maximum calendering response was obtained for the coated paper prepared from 80pph of clay and 20pph of ground calcium carbonate (GCC) as pigments. Photomicrographs of the surface and cross section of the coating layer show that clay tends to form dense coating structure, while GCC tends to form bulky coating layer.

• 대한산업공학회지
• /
• 제20권2호
• /
• pp.77-90
• /
• 1994

Curve-net interpolation surface is one of the most popular method in engineering design. Therefore it is supported with many commercial CAD/CAM system. However, construction algorithm of curve-net interpolation surfaces is rarely opened to the public because of its copy-right. In this paper we establish a construction algorithm of curve-net interpolation surface so called sweeping surface which especially concentrates on trajectory of cross-section curve. We also show the method which can construct sweeping surfaces as NURB or Bezier mathematical models. Surfaces having the form of standard mathematical models are very useful for the application of joining, trimming, blending etc. The proposed surface interpolation scheme consists of four steps; (1) preparation of guide curves and section curves, (2) remeshing guide curves and section curves, (3) blending section curves after deformation, and (4) determination of control points for sweeping surface using gordon method. The proposed method guarantee $G^1$-continuety, and construct the surface salifying given section curves and trajectory of section curves.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.36-41
• /
• 2006

PVC and SAN are often mixed to compensate for the disadvantages of each polymer. Miscibility and thermal stability of PVC/SAN blend were investigated in this study by blending SAN polymer having 20, 24, 28, 32 % of acrylonitrile contents. Two polymers were mixed using a melt blending method with a single screw extruder. DSC thermogram was used to evaluate miscibility of the two polymers. SAN having 24 % of acrylonitrile showed the best miscibility with PVC. In order to evaluate degradation behavior, blended polymer was heat treated in DSC furnace and glass transition temperature was measured consecutively. Glass transition temperature increased continuously with annealing time due to degradation and cross-linking of polymer chains. Melt index of blended polymer was always higher than that of PVC.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.66-72
• /
• 1997

Circular-to-rectangular transition ducts are used as exhaust components of high performance fighter aircraft with vectored thrust nozzles. Three-dimensional incompressible Navier-Stokes solver is used to analyze the transition duct. Cross sections of transition duct are defined by superelliptic equation. The grid system is generated by Non-Uniform Rational B-Spline, after generating surface grid by blending the cross sections. Good agreement between the results of the computational simulation and the experimental data is observed.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.185-191
• /
• 1992

In this paper, it is attempted to distinguish the charged particles and to judge the polarity by the use of Thermally Stimulated Current(TSC) and Temperature Gradient Thermally Stimulated Surface Potential Measurement(TG-TSSP)with experimental insulation material XLPE-EVA for power cables which is made by blending cross-linked polyethylene(XLPE) and ethylene-vinylacetate copolymer(EVA). In addition, it is performed to investigate the effect of EVA blending. From the experimental results, it is known that for the case of XLPE-EVA blended experimental material, the generation of space charged electric field is not obtained in the high temperature region due to the obatruction of the injection of trapping carrier by the electron and the positive hole.

• 한국식품위생안전성학회지
• /
• 제6권3호
• /
• pp.111-117
• /
• 1991

가축사료중 zearalenone 분석을 위한 enzyme linked immunosorbent assay(ELISA) 법의 개발을 위해 우선 zearalenone의 항원성을 증폭시키기 위해 zearalenone oxime 유도체를 합성한 다음 bovine serum albumin(BSA)와 conjugate를 만들고, 이를 항원으로 토끼에 면역시켜 11주에 zearalenone에 특이한 항체를 얻어냈다. 생성된 항체를 zearalenone외에 ${\alpha}-zearalenol$과는 강한 cross reactivity를 나타내었고 ${\beta}-zearalenol,\;{\alpha}-zearalenol\;및\;{\beta}-zearalenol$과는 약간의 반응을 보였으며 확립된 ELISA 조건은 당므과 같다. 먼저 시료를 methanol-phosphate buffered saline-dimethyl formate(70 : 29: 1)을 4배 첨가하여 blending 한 다음 Whatman No. 4를 통한 여액을 ELISA시료로 사용하였다. 효소 반응시간과 발색시간은 각각 $37^{\circ}C$에서 30분과 15분이었고, 흡광도는 410nm에서 ELISA reader로서 측정하였으며, 측정한계는 1~100 ppb로 매우 낮았다. 확립된 ELISA 조건으로 실제시료의 zearalenone오염도는 측정결과 24개 시료 중 4개의 시료가 양성반응을 보였고 그 함량범위는 $3.93~7.43\;\mu\textrm{g}/kg$이었다.

• 공업화학
• /
• 제30권6호
• /
• pp.643-651
• /
• 2019

Polybenzimidazole (PBI), an engineering polymer with well-known excellent thermal, chemical and mechanical stabilities has been recognized as an alternative to high temperature polymer electrolyte membranes (HT-PEMs). This review focuses on recent advances made on the development of PBI-based HT-PEMs for fuel cell applications. PBI-based membranes discussed were prepared by various strategies such as structural modification, cross-linking, blending and organic-inorganic composites. In addition, intriguing properties of the PBI-based membranes as well as their fuel cell performances were highligted.

• 한국응용과학기술학회지
• /
• 제18권2호
• /
• pp.142-152
• /
• 2001

Acrylic resin(ACR) was blended with a curing agent, hexamethoxymethylmela-mine(HMMM), in which blending ratio was 70:30. The curing behavior was examined using Rheovibron. Cross-linking reaction started at $170^{\circ}C$ in 2 min of reaction and curing was completed in 10 min. It was found that the extent of cross-linking increased with the content of acetoacetoxyethyl methacrylate monomer in the ACR.