• The Journal of Korean Association of Computer Education
• /
• v.6 no.3
• /
• pp.47-56
• /
• 2003

We describe a new method for removing non-linear phased array antenna aberration called "squint" problem. To develop a compensation scheme. theoretical antenna and artificial neural networks were used. The purpose of using the artificial neural networks is to develop an antenna system model that represents the steering function of an actual array. The artificial neural networks are also used to implement an inverse model which when concatenated with the antenna or antenna model will correct the "squint" problem. Combining the actual steering function and the inverse model contained in the artificial neural network, alters the steering command to the antenna so that the antenna will point to the desired position instead of squinting. The use of an artificial neural network provides a method of producing a non-linear system that can correct antenna performance. This paper demonstrates the feasibility of generating an inverse steering algorithm with artificial neural networks.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.894-900
• /
• 2006

This paper reports the fabrication and characterization of $32{\times}32$ thermal cantilever array for nano-scaled memory device applications. The $32{\times}32$ thermal cantilever array with integrated tip heater has been fabricated with micro-electro-mechanical systems(MEMS) technology on silicon on insulator(SOI) wafer using 9 photo masking steps. All of single-level cantilevers(1,024 bits) have a p-n junction diode in order to eliminate any electrical cross-talk between adjacent cantilevers. Nonlinear electrical characteristic of fabricated thermal cantilever shows its own thermal heating mechanism. In addition, n-channel high-voltage MOSFET device is integrated on a wafer for embedding driver circuitry.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.343-352
• /
• 2012

To follow a sound source by a mobile robot, the relative position and orientation of the sound source from the mobile robot have been estimated using a microphone array. In this research, the difference among the traveling times of the sound source to each of three microphones has been used to calculate the distance and orientation of the sound source from the mobile robot which carries the microphone array. The cross-correlation between two signals has been applied for detecting the time difference between two signals, which provides reliable and precise value of the time difference comparing to the conventional methods. To generate the tracking direction to the sound source, fuzzy rules are applied and the results are used to control the mobile robot in a real-time. The efficiency of the proposed algorithm has been demonstrated through the real experiments comparing to the conventional approaches.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.677-682
• /
• 2006

In the case of aeroacoustic test in windtunnel, measurement accuracy is reduced by not only Doppler effects but also by the microphone self noise due to airflow and high turbulence in the wall boundary layer. Microphone array measurements can be easily utilized for the solutions of these problems. In this paper, geometrical optics approach and diagonal term elimination of cross spectral matrix was introduced to the de-dopplerization and self noise reduction methods for the microphone array measurement. For the validation, beamforming tests for sinusoidal point source were performed in the closed type test section of windtunnel, and their performances of beam width and sidelobe rejection were significantly improved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.822-825
• /
• 2005

In the case of aeroacoustic test in windtunnel, measurement accuracy is reduced by not only Doppler effects but also by the microphone self noise due to airflow and high turbulence in the wall boundary layer. Microphone array measurements can be easily utilized for the solutions of these problems. In this paper, geometrical optics approach and diagonal term elimination of cross spectral matrix was introduced to the de-dopplerization and self noise reduction methods for the microphone array measurement. For the validation, beamforming tests for sinusoidal point source were performed in the closed type test section of windtunnel, and their performances of beam width and sidelobe rejection were significantly improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.664-670
• /
• 2014

Generally, the properties of metamaterials are analyzed based on the infinite array of the unit cells. In real application of the metamaterial, however, the array has to be finite. Hence, it is important that a method can analyze the effect of the finite array of the metamaterial. In this paper, a model is proposed which can calculate the scattering by a large-size finite array of an I-shaped metamaterial without a full-wave simulation. The proposed model is based on the surface current estimation of each unit cells. The ratio of the current distribution on a finite array of the metamaterial to that of the infinite array of the same metamaterial for a TM polarized incident wave is approximated as a quartic polynomial. The coefficients of the polynomial are a function of the physical dimension of the metallic patch. Hence, the current distribution of the finite metamaterial can be estimated based on the proposed polynomial and the current of the infinite array. The scattered field is calculated by using the surface current model. The proposed model is numerically and experimentally verified by comparing calculated and measured RCS(Radar Cross Section) data.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.177-180
• /
• 2000

소나 시스템에서는 신호 대 잡음비의 향상, 표적의 방위탐지 및 위치 데이터 산출, 간섭신호 제거 등을 위하여 지향성 빔을 만들어 사용한다. 본 논문에서는 선형으로 배열된 센서에서 각 센서쌍들에 대한 상호상관 행렬을 이용한 SCCBF(Spatial Cross Correlation Beamformer) 알고리즘을 제안하였다 이상적인 조건하에서 제안된 SCCBF는 CBF(Conventional Beamformer)에 비해 3dB의 Array Gain을 갖는 것을 이론적으로 검증하고 표적의 탐지 방위정확도를 나타내는 빔폭(Beam Width)이 CBF 보다 0.5배정도가 됨을 검증하고 모의실험을 통하여 이를 입증하였다.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.328-335
• /
• 2005

This paper proposes a frequency domain independent component analysis (ICA) algorithm to separate the mixed speech signals using a multiple microphone array By estimating the delay timings using a input cross-correlation, even in the delayed mixture case, we propose a good initial value setting method which leads to optimal convergence. To reduce the calculation, separation process is performed at frequency domain. The results of simulations confirms the better performances of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.364-372
• /
• 1994

Theoretical method for analyzing the radiation pattern of cross-type 5-patch rectangular microstrip antenna is presented. The equivalent circuit of the array antenna is represented by the conventional transmission line model and the radiation admittance derived from the equivalent circuit of the slitted parallel-plate waveguide filled with a dielectric. The calculated results for the radiation pattern are compared with the measured values.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.61-66
• /
• 2003

Fouling is very serious problem in heat exchanger because it rapidly deteriorates the performance of heat exchanger. Cross-flow heat exchanger with vortex generators is developed, which enhance heat transfer and reduce fouling. In the present heat exchanger, shell and baffle are removed from the conventional shell-and-tube heat exchanger. The naphthalene sublimation technique is employed to measure the local heat transfer coefficients. The experiments are performed for single circular tube, staggered array tube bank and in-line array tube bank with and without vortex generators. Local and average Nusselt numbers of single tube and tube bank with vortex generator are investigated and compared to those of without vortex generator.