• Journal of the Korean Operations Research and Management Science Society
• /
• v.6 no.1
• /
• pp.15-23
• /
• 1981

This paper deals with cross impact analysis for technology assessment. The focus of the paper is to develop new technique of cross impact matrix using goal programming method. In this study, the idea of cross impact analysis based on scenario generation method especially SMIC-74 (2) is expanded. Critical literature review on SMIC-74 is presented to discuss the mathematical rationale of consistent probability in cross impact analysis. A new model of cross impact analysis using goal programming to overcome the shortcomings of the scenario generation technique especially SMIC-74 is developed. This new technique is also applied to the assessment of the air pollution problems in Seoul Metropolitan area in Korea. The results of analysis give us following findings 1) Cross impact analysis using goal programming produce more meaningful solutions comparing to those of SMIC-74 2) Theoretical rationale of the objective function in the newly developed technique is more appropriate than that of SMIC-74.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.7-13
• /
• 2004

In this paper, we demonstrate that Common Mid-Point (CMP) cross-correlation gathers of multi-channel and multi-shot surface waves give accurate phase-velocity curves, and enable us to reconstruct two-dimensional (2D) velocity structures with high resolution. Data acquisition for CMP cross-correlation analysis is similar to acquisition for a 2D seismic reflection survey. Data processing seems similar to Common Depth-Point (CDP) analysis of 2D seismic reflection survey data, but differs in that the cross-correlation of the original waveform is calculated before making CMP gathers. Data processing in CMP cross-correlation analysis consists of the following four steps: First, cross-correlations are calculated for every pair of traces in each shot gather. Second, correlation traces having a common mid-point are gathered, and those traces that have equal spacing are stacked in the time domain. The resultant cross-correlation gathers resemble shot gathers and are referred to as CMP cross-correlation gathers. Third, a multi-channel analysis is applied to the CMP cross-correlation gathers for calculating phase velocities of surface waves. Finally, a 2D S-wave velocity profile is reconstructed through non-linear least squares inversion. Analyses of waveform data from numerical modelling and field observations indicate that the new method could greatly improve the accuracy and resolution of subsurface S-velocity structure, compared with conventional surface-wave methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.9-17
• /
• 1999

This investigation is the result of the structural analysis by finite element method for optimal design of the cross beam with circular holes of the electric car-body. in order to install the air pipe and electric wire pipe that correspond signal between electric machines for the control system and to reduce the weight of the electric car-body, several circular areas from a cross beam should be taken off. What we want to perform is the optimal design of a cross beam with circular holes to posses equal stress in comparison with no hole cross beam. first, no hole cross beam as basic modal be chosen, executing the analysis, reviewing the distribution of stress and displacement at each location. several parameter should be adopted from the cross beam geometry like the location and shape of the hole to affect the maximum stress and displacement. So the analysis was executed by finite element analysis for finding optimal design parameter to the change of the location and shape of the circular hole. finally, the optimal design of the cross beam with circular holes was obtained and the maximum equivalent stress was compared with no hole cross beam at each location.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.675-682
• /
• 2002

In this study, we develop the statistical analysis program for genetic analysis of diallel crosses data by SAS/MACRO, SAS/IML. Genetic analysis is to estimate of genetics parameters and heredity with reciprocal cross and without reciprocal cross. Statistical analysis program solve the problem of the difficulties on the data analysis in field denetics and breeding Therefore the user whoever want to analysis of data on genetics and breeding easily conduct the work saving time and suffering.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2013

Car cross beam made by aluminium for new car is designed for the substitution of steel and it can be verified the performance by computer simulations. The parts of car cross beam are designed to replace steel parts according to their manufacturing processes. At the first stage, the weight of the aluminium car cross beam can be reduced to 75% by comparing with that of steel car cross beam. But NVH performance of the aluminium car cross beam becomes slightly insufficient as compared with that of steel car cross beam. Taguchi method is adopted to optimize the design variables affecting NVH characteristics of car cross beam. New car cross beam is designed at the second stage by using these analysis results. Weight reduction can be obtained to 31.7% by design modification and material change of car cross beam in comparison with the original steel one. NVH characteristics of aluminium car cross beam become on an equal level with the steel car cross beam. By side impact analysis results, new car cross beam has higher performance as compared with the steel car cross beam.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1428-1434
• /
• 2004

This paper presents the mean streamline analysis using the empirical loss correlations for performance prediction of cross-flow fans. Comparison of overall performance predictions with test data of a cross-flow fan system with a simplified vortex wall scroll casing and with the published experimental characteristics for a cross-flow fan has been carried out to demonstrate the accuracy of the proposed method. Predicted performance curves by the present mean streamline analysis agree well with experimental data for two different cross-flow fans over the normal operating conditions. The prediction method presented herein can be used efficiently as a tool for the preliminary design and performance analysis of general-purpose cross-flow fans.

• Journal of Distribution Science
• /
• v.12 no.7
• /
• pp.63-75
• /
• 2014

Purpose - This study analyzes topics discussed in the International Journal of Consumer Studies through a content analysis, to reveal the impact of cross-cultural management in consumer research. Research Design, Data, and Methodology - The International Journal of Consumer Studies has the highest impact factor among international consumer journals, and was chosen for research. This study investigated 712 articles, covering a ten-year period. Results - A total of 82 articles were found to be related to cross-cultural management, out of 712 articles. This shows a need for improvement in the area of cross-cultural management, and implies that the discipline of cross-cultural management will continue to have a significant impact on consumer studies. Conclusions - While content analyses have been conducted in the area of consumer research in the past, a comparative content analysis in the International Journal of Consumer Studies is unprecedented. This study offers insights on the comparative analysis of general articles and articles related to cross-cultural management, which will be useful reference points for future global markets and fields in distribution and consumer research.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.103-110
• /
• 2000

Flow analysis of profile extrusion is essential for design and production of a profile extrusion die. Velocity, pressure, and temperature distribution in an extrusion die are predicted and compared with the experimental results. A two dimensional numerical method is proposed for three dimensional analysis of the flow field within the profile extrusion die by applying a modified cross-sectional numerical method. Since the cross-sectional shape of the die is varied gradually, it is assumed that the pressure is constant within a cross-sectional plane that is perpendicular to the flow direction. With this assumption, the velocity component in the cross-sectional direction is neglected. The exact cross-sectional shape at any position is calculated based on the geometry of standard cross-sections. The momentum and energy equations are solved with proper boundary conditions at a cross-section and then the same calculation is carried out for the next cross-section using the current calculated values. An L-shaped profile extrusion die is produced and employed for experimental investigation using a commercially available polypropylene. Numerical prediction for the varying cross-sectional shape provides better results than the previous studies and is in good agreement with the experimental results.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.77-85
• /
• 2009

A two-dimensional cross-section analysis program based on the finite element method has been developed for composite blades with arbitrary cross-section profiles and material distributions. The modulus weighted approach is used to take into account the non-homogeneous material characteristics of advanced blades. The CLPT (Classical Lamination Plate Theory) is applied to obtain the effective moduli of the composite laminate. The location of shear center for any given cross-sections are determined according to the Trefftz' definition while the torsion constants are obtained using the St. Venant torsion theory. A series of benchmark examples for beams with various cross-sections are illustrated to show the accuracy of the developed cross-section analysis program. The cross section cases include thin-walled C-channel, I-beam, single-cell box, NACA0012 airfoil, and KARI small-scale blades. Overall, a reasonable correlation is obtained in comparison with experiments or finite element analysis results.

• Journal of Distribution Science
• /
• v.12 no.5
• /
• pp.81-92
• /
• 2014

Purpose - This paper aims to investigate topics and trends in international marketing and cross-cultural management by conducting a content analysis of the Journal of International Marketing. Research Design, Data, and Methodology - In this study, one of the leading journals in the field of international marketing, the Journal of International Marketing, was chosen for research. A total of 199 articles were identified from a time span of ten years (2004-2013). SPSS software was used for codification and analysis of the data. Results - This study revealed some of the factors on which cross-cultural management had a strong correlation with international marketing. Of the 199 articles in the Journal of International Marketing, 64 articles related to cross-cultural management. Conclusions - A content analysis of the Journal of International Marketing comparing general articles with articles related to cross-cultural management is unprecedented. This study offers insight into the impact of cross culture on the discipline of international marketing. The findings of this research could be employed as a reference for gaining insight into the trends and influence of cross-cultural management in international marketing.