• 제목/요약/키워드: Crop planting data

검색결과 69건 처리시간 0.031초

남부지방 콩 만파 재배 시 재식밀도에 따른 생육 및 수량변이 (Growth and Yield Responses of Soybean to Planting Density in Late Planting)

  • 박현진;한원영;오기원;고종민;배진우;장윤우;백인열;강항원
    • 한국작물학회지
    • /
    • 제60권3호
    • /
    • pp.343-348
    • /
    • 2015
  • 1. 남부지역에서 대원콩을 이용하여 재배한 결과, 주당본수를 높일수록 식물체 간 경합에 의해 경장은 길어지고 경태는 가늘어지며 분지수가 감소하여 도복에 취약한 초형으로 생육한다. 다만 만파재배 시에는 생육기간이 단축되므로 주당본수를 높이더라도 도복이 우려될 만큼 경장이 신장하지 않는다. 2. 마디수는 주당본수 별로 유의한 차이가 나지 않았으며 협수는 주당본수가 높아질수록 감소하는 경향을 나타내었다. 3. 재식밀도의 증가에 의한 증수효과는 7월 중순이후로 극만파할 때에 관찰되며 1주 4본 재배 시 표준재배에 비하여 34 % 증수효과가 있었고, 1주 5본 이상 재배할 경우 오히려 수량이 감소하였다. 4. 따라서 만파재배 시에는 밀식하여도 잘 도복하지 않으며 $70{\times}20cm$로 재배할 때 1주 4본까지 재식밀도를 높이는 것이 수량증대에 유리하다.

Effect of different plant densities on growth and yield of sorghum(Sorghum bicolor L. Moench.)

  • Cho, Young Dae;Jung, Ki Yuol;Chun, Hyun Chung;Lee, Sang Hun;Kang, Hang Won
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.206-206
    • /
    • 2017
  • Sorghum is a crop with a various plant height depending on the planting density. If the height exceeds 1.8m, which is the harvestable height of the combine, loss is caused by clogging of the installation, entrance of the threshing section and the threshing section. The purpose of this study is to set the planting distance and number of plants per hill suitable for combine harvesting as the plant length does not exceed 1.8m. The experimental variety was Nampungchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plot were 1 and 2 plants as number of plants per hill and sub-plots were $60{\times}20cm$ (practice), $70{\times}15$, 20, 25, 30 cm as planting distance. The amount of nitrogen, phosphate and potassium fertilization were 100, 70, $80kg\;ha^{-1}$. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode, (6) tiller number per hill. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. As number of plants per hill increased, plant height and yield increased and tiller number decreased. As planting distance increased, plant height and yield decreased and tiller number increased. At 1 plant per hill, the plant height did not exceed 1.8m at all planting distance. At 2 plants per hill, the plant height did not exceed 1.8m from the planting distance of $70{\times}25cm$. At 1 plant per hill, the tiller number increased to 0.23, 0.27, 0.60 and 0.70 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 2 plants per hill, the tiller number increased to 0.03, 0.03, 0.14 and 0.40 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 1 plant per hill, the yield decreased to 6030, 4280, 3400 and $3230kg\;ha^{-1}$ as the planting distance increased. At 2 plant per hill, the yield decreased to 7850, 5770, 5720 and $4960kg\;ha^{-1}$ as the planting distance increased. We recommend that the optimum number of plants per hill and planting distance is 2 and $70{\times}25cm$ suitable for combine harvesting.

  • PDF

Effects of Planting Dates on Growth and Yield of Soybean Cultivated in Drained-Paddy Field

  • Cho Jin-Woong;Lee Jung-Joon;Kim Choong-Soo
    • 한국작물학회지
    • /
    • 제49권4호
    • /
    • pp.325-330
    • /
    • 2004
  • This study was carried out to determine adequate planting date, to compare the growth characteristics between early and late maturing cultivars, and to provide the data for the cultivation techniques of soybean [Glycine max (L.) Merr.] in double cropping system with winter crops on paddy field in Korea. Cultivars were planted on 26 May, 16 June, and 7 July with a planting density of $70cm(row\;widtb)\;{\times}\;10cm$ (planting spacing). Seed yield of soybean planted on June 16 and July 7 was approximately $37\%\;and\;53\%$, respectively, less than that of conventional planting date of May 26 in Pungsan-namulkong, and planted on June 16 and July 7 was about $30\%\;and\;37\%$, respectively, less then that of conventional planting date of May 26 in Hanamkong. The number of pods and seeds per plant decreased as planting date delayed. Seed weight increased in Pungsan-namulkong but decreased in Hannamkong as planting date delayed. The flowering date was late in delayed planting plots, but it was shorted for days from emergence to flowering and from emergence to maturity. The plant height of Hannamkong was greater than Pungsan-namulkong from the emergence to flowering stages, but in contrast, it was greater in Pungsan-namulkong than Hannamkong after flowering stage (50d after emergence) when it planted on May 26. There were no significant differences between two soybean cultivars at planting dates of June 16 and July 7. Leaf number, leaf area, and dry matter were also reduced by late planting, and Both of them were shown in high reduction at the later planting. There was a high significant difference at the flowering $(r\;=\;0.87^{**})$ and pod formation $(r\;=\;0.91^{**})$ stages between leaf dry matter and seed yield. Crop growth rate (CGR) was greater at $R2\~R3$ growth stages compared to $R3\~R4\;or\;R4\~R5$ growth stages in two soybean cultivars and the greatest CGR was obtained at planting date of May 26 in two soybean cultivars except for R4-R5 growth stage in Pungsan-namulkong. There was a highly significant positive difference between the seed yield and the leaf area index (LAI) across R3 to R4 and R2 to R3 stages. The photosynthetic rate $(P_N)$ of the uppermost leaf position had no significant difference among planting dates and between two soybean cultivars. However, $P_N$ of the $7^{th}$ leaf position increased as the planting date delayed.

Effect of planting density and seeding date on the tiller occurrence, growth and yield of sorghum (Sorghum bicolor L.)

  • Han, Tae Kyu;Yoon, Seong Tak;Jeong, In Ho;Kim, Young Jung;Yu, Je Bin;Yangjing, Yangjing;Ye, Min Hee
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.348-348
    • /
    • 2017
  • This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

  • PDF

한국산 개똥쑥의 재배특성 및 수확시기에 따른 Artemisinin의 함량변이 (Cultivation Characteristics and Variation of Artemisinin Contents by Harvest Time of Artemisia annua L. Distributed in Korea)

  • 이정훈;이상훈;박춘근;박충범;김옥태;최애진;김용주;차선우
    • 한국약용작물학회지
    • /
    • 제21권6호
    • /
    • pp.433-438
    • /
    • 2013
  • This study was conducted to obtain the basic data for using the Artemisia anuua as a new economic crop, thus Artemisia anuua was investigated their cultivation characteristics, yield, and variation of artemisinin contents by planting density and harvesting times. Seed characteristics of A. anuua have observed micro-size, and their germination optimum temperature was at 15 to 20 celsius degree. Planting density on the yield of A. anuua was increased high density better than low density. The highest yield was planted in the space of $30{\times}10$cm. Moreover, optimum harvesting time of A. anuua was investigated in early september and a periods of most highly detected artemisinin was time of before and after blooming of A. anuua.

IOT를 이용한 농작물 재배 데이터 취득에 관한 연구 (A Study on Crop planting data acquisition using the IOT)

  • 조영석
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
    • /
    • pp.55-56
    • /
    • 2017
  • 본 논문에서는 작물재배에 대한 전문지식이 없는 초심자를 위하여 IOT를 이용하여 작물 재배에 필요한 데이터를 취득하는 시스템을 제안한다. 베이비 붐 세대의 은퇴가 진행되면서 도시농업의 증가와 정밀 고소득 장물에 대한 수요가 증가되고 있어 이에 필요한 작물의 재배자료에 대한 중요성이 증대되고 있다. 이에 각각의 작물에 따른 최적의 재배데이터를 계측하여 데이터베이스로 구축에 관한 연구를 진행하고자 한다. 작물 재배 데이터의 취득은 작물 데이터를 취득하는 계측 및 제어부와 계측데이터를 수집하고, 수집된 데이터를 기초로 작물재배 데이터를 처리하는 서버부분으로 구성되며, 계측 및 제어부에서 재배환경의 온도, 습도, 그리고 광량, 수분공급시기, 영양분 투입 데이터를 계측하여 일정 시간마다 서버로 저장한다. 따라서 본 논문에서 구축하고자 하는 IOT를 이용하여 작물 재배에 필요한 데이터는 최적의 작물 생장환경을 지속적으로 제공하여 비전문가의 농업활동에 새로운 방향을 제시하리라 사료된다.

  • PDF

재식거리 및 파종기 이동에 따른 수수자원의 분얼발생 및 생장 특성 (Effect of Planting Distance and Seeding Date on the Tiller Occurrence, Growth Characteristics of Sorghum (Sorghum bicolor L.) Resources)

  • 한태규;윤성탁
    • 한국자원식물학회지
    • /
    • 제30권4호
    • /
    • pp.427-434
    • /
    • 2017
  • 재식밀도 및 파종기 이동이 수수의 분얼발생 및 생육 수량에 미치는 영향을 조사하여 기계화 수확을 위한 분얼양상 및 생육특성에 대한 기초자료를 얻기 위하여 수행한 결과 재식밀도에 따른 분얼경수는 조간 60 cm보다 80 cm에서 많았으며, 주간거리가 30 cm로 늘어날수록 증가하였다. 유효경비율은 조간 60 cm가 80 cm보다 높았으며, 주간거리가 15 cm에서 30 cm로 늘어날수록 감소하여 재식밀도가 낮아질수록 분얼경수가 증가하였으며, 유효경비율은 감소하였다. 파종기 이동에 따른 수수 3품종 분얼경수는 5월 2일 파종기(1차)에서 가장 높았으며, 파종기가 늦어질수록 분얼경수가 감소하였으며, 유효경 비율은 5월 23일(2차) 파종기에서 가장 높았다. 품종별로는 황금찰이 분얼경수가 1.2개로 가장 많았으며, 목탁수수가 0.8개로 가장 적었다. 재식밀도에 따른 수수의 출수소요일과 성숙소요일은 유의한 차이가 없었으며, 밀식할수록 간장은 증가하였으나 수장, 수당립수, 천립중 모두 감소하였다. 수량은 재식밀도 $60{\times}20cm$에서 가장 높았다. 파종기가 늦어질수록 출수소요일, 성숙소요일, 간장 및 경직경은 감소하였으나 수장과 수당립수는 증가하였다. 주경의 천립중과 수당립수는 6월 13일(3차) 파종기에서 가장 높았으며, 수량은 5월 2일(1차) 파종기에서 가장 많았다.

Oryza2000 모형 활용을 위한 육묘기 보온 상승온도 결정 (Determination of the Temperature Increasing Value of Seedling Nursery Period for Oryza2000 Model to Applicate Grid Weather Data)

  • 김준환;상완규;신평;백재경;권동원;이윤호;조정일;서명철
    • 한국농림기상학회지
    • /
    • 제22권1호
    • /
    • pp.20-25
    • /
    • 2020
  • 최근 고해상도의 격자형 기상자료를 활용한 기후변화 또는 농업기후분석이 시도되고 있다. 모형구동을 위해서는 각 격자별로 재배 정보를 입력해야만 한다. 이러한 입력정보 중 Oryza2000 에서는 육묘기간 온도상승값이 필요하며 이는 지역별로 파종기에 따라 변화될 수밖에 없다. 그러나 격자형 자료를 사용하여 모의할 때는 이것들을 모든 격자에 대해서 변화된 값을 주는 것은 어렵다. 이 문제를 해결하기 위해 철원, 수원, 서산, 광주에 대해서 4 월 중순부터 6 월 중순까지 육묘온도 상승값을 0℃, 2℃, 5℃, 7℃ 및 9℃로 적용하고 가장 변이 발생이 적은 온도를 선택하였다. 0℃와 2℃는 4 월 중순의 낮은 온도가 발생하였을 때 큰 변이를 보여 적절하지 않았으며 7℃이상에서는 변이가 줄어들었으나 모몸살 효과에 따른 출수지연 효과가 지역별로 파종기별로 과대평가되는 경우가 발생할 수도 있다. 따라서 전반적으로는 5℃가 가장 안정적인 출수날짜를 보였으며, 격자형 기상자료를 구동할 때는 이를 활용하는 것이 좋을 것으로 판단된다.

Growth Monitoring for Soybean Smart Water Management and Production Prediction Model Development

  • JinSil Choi;Kyunam An;Hosub An;Shin-Young Park;Dong-Kwan Kim
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.58-58
    • /
    • 2022
  • With the development of advanced technology, automation of agricultural work is spreading. In association with the 4th industrial revolution-based technology, research on field smart farm technology is being actively conducted. A state-of-the-art unmanned automated agricultural production demonstration complex was established in Naju-si, Jeollanam-do. For the operation of the demonstration area platform, it is necessary to build a sophisticated, advanced, and intelligent field smart farming model. For the operation of the unmanned automated agricultural production demonstration area platform, we are building data on the growth of soybean for smart cultivated crops and conducting research to determine the optimal time for agricultural work. In order to operate an unmanned automation platform, data is collected to discover digital factors for water management immediately after planting, water management during the growing season, and determination of harvest time. A subsurface drip irrigation system was established for smart water management. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. Vegetation indices were collected using drones to find key factors in soybean production prediction. In addition, major growth characteristics such as stem length, number of branches, number of nodes on the main stem, leaf area index, and dry weight were investigated. By discovering digital factors for effective decision-making through data construction, it is expected to greatly enhance the efficiency of the operation of the unmanned automated agricultural production demonstration area.

  • PDF

국내 사과원의 재배형태 및 농약 살포방법 조사 (Survey of Planting System and Pesticide Spray Method on Apple Orchards in Korea)

  • 권혜영;홍수명;김상수;백민경;이효섭;김단비;문병철
    • 농약과학회지
    • /
    • 제21권1호
    • /
    • pp.9-16
    • /
    • 2017
  • 국내에서 재배면적이 가장 넓은 과수인 사과에 대하여 전국 주산단지 포함 17개 시 군 지역 395농가를 대상으로 품종, 수관높이, 재식거리 등의 재배형태 및 농약 살포 물량, 살포기의 종류, 사용 노즐의 종류 등 농약의 살포 방법에 대한 조사를 수행하였다. 사과 품종은 Fuji와 Hongro가 79.2%, 50.9%로 주로 재배되었으며, 재배방식은 주로 저수고 고밀식 재배 형태를 보였다(열간거리: 4.0~4.5 m (73.1%), 재식거리: 1.5~3.5 m (88.6%), 수관높이: 3.0~4.5 m (88.2%)). 주로 사용하는 살포기는 스피드스프레이어 77.6%, 동력 분무기 22.1%로 나타났다. 농약의 단위 면적당(10a) 살포물량은 농약을 적게 살포하는 시기인 4월에는 250~300 L, 농약을 많이 살포하는 시기인 6~8월에는 300~400 L를 주로 살포하는 것으로 조사되었다. 재배유형 및 지역간의 살포물량 차이를 분석한 결과 관행재배와 저수고 고밀식재배 유형에서는 유의적인 차이가 나타나지 않았으나 지역별로는 유의적인 차이를 나타냈다. 동력분무기를 사용할 때 주로 사용하는 노즐은 대포노즐 45%, 회전곡자노즐 26%, 2~3구 플라스틱 금속 노즐이 25%로 나타났다. 이상의 결과들은 농가의 현실을 반영한 농약 살포 물량 설정, 농약의 작물 잔류성 자료 및 약효 자료 평가 등 농약의 등록 관련 정책 수립에 기초자료로 활용될 수 있을 것으로 보인다.