• 제목/요약/키워드: Critical velocity

검색결과 831건 처리시간 0.025초

RAMS+를 이용한 하천에서 오염물질의 2차원 체류시간 분포 모델링 (Modeling 2D residence time distributions of pollutants in natural rivers using RAMS+)

  • 김준성;서일원;신재현;정성현;윤세훈
    • 한국수자원학회논문집
    • /
    • 제54권7호
    • /
    • pp.495-507
    • /
    • 2021
  • 최근 도시와 산업의 발달과 함께 하천, 호소 등 수환경에서의 수질 오염사고가 빈번하게 일어나고 있어 어류폐사, 취수중단, 친수활동 저해 등 심각한 수생태계 및 사회경제적 피해가 발생하고 있다. 따라서 이에 대한 대응책으로 수질모델링을 통한 오염물질의 이동 및 확산에 대한 사전 예측이 필요하다. 본 연구에서는 2차원 하천흐름/수질해석 프로그램인 RAMS+의 현장 적용성 및 예측 정확도를 검증하기 위해 만곡하천인 섬강에서 현장실험을 수행하였다. 모의결과 흐름해석모형 HDM-2Di와 수질해석모형 CTM-2D-TX는 현장실험에서 관측된 2차원 흐름 특성과 오염물질의 거동 및 혼합 양상을 정확하게 재현하였다. 특히 하천의 양안과 만곡부에서 국부적으로 발생하는 저유속 흐름에 의해 오염물질의 거동이 지체되는 저장대 효과를 정확하게 모의하였다. 나아가서 하천 만곡부에서 이차류가 야기하는 오염물질 3차원적 혼합 양상을 2차원 분산계수를 통해 효과적으로 재현하였다. 오염물질의 위험농도 체류시간은 취수중단 기간을 결정하는데 있어 매우 중요한 요소이다. 본 연구에서는 CTM-2D-TX 모의결과를 기반으로 오염물질 위험농도 체류시간을 계산하였고, 위험농도 체류시간의 공간적 분포가 하폭방향으로 큰 편차를 지니고 있음을 확인하였다. 이러한 오염물질의 2차원적 체류 특성은 1차원 수질모형을 통해서는 예측이 불가능하기 때문에 효율적이고 정확한 수질사고대응을 위해 2차원 수질모형의 활용이 필요함을 본 연구의 결과는 시사하고 있다.

신뢰성 있는 분산곡선의 결정을 위한 수동표면파 측정 및 분석기법의 제안 (A Recommendation of the Technique for Measurement and Analysis of Passive Surface Waves for a Reliable Dispersion Curve)

  • 윤성수
    • 한국지반공학회논문집
    • /
    • 제23권2호
    • /
    • pp.47-60
    • /
    • 2007
  • 해머나 중추 등의 순간가진원이나 진동기 등의 연속가진원을 사용하는 주동표면파기법에서는 저주파대역에서 충분한 에너지를 갖는 표면파를 얻기 어렵기 때문에, 종종 발생된 표면파의 가탐심도가 충분하지 못한 한계에 부딪힌다. 일반직인 가진원 장비로 발생되는 이러한 주동표면파의 한계는 심층지반구조를 파악할 수 없게 함으로써 지반의 정확한 지진응답해석을 어렵게 한다. 반면에 상시미동이나 주변잡음 등과 같은 수동가진원에 의해 발생된 수동표면파를 이용하면 저주파대역에서 충분한 에너지를 갖는 표면파를 얻을 수 있기 때문에 이러한 주동표면파의 단점을 극복하고 심층지반까지의 전단파속도 주상도를 얻을 수 있다. 수동표면파의 측정자료로부터 계산된 수동분산값의 신뢰도를 향상시키는 것은 보다 정확한 전단파속도 주상도를 얻기 위해 필수적이며, 수동분산값의 신뢰도를 향상시키기 위해선 수동분산값에 포함되는 계통오차에 대한 올바른 이해를 바탕으로 한 수동표면파의 측정과 분석이 필요하다. 본 논문에서는 수동표면파 시험에 있어 계통오차를 발생시키는 부족한 파수해상도와 측면로브를 통한 에너지누수에 관한 연구를 수행하고 신뢰성 있는 분산곡선 결정을 위한 수동표면파의 측정 및 분석기법을 제안한다. 제안된 기법을 적용한 일련의 수동표면파시험이 미국 캘리포니아주 산호세의 한 현장에서 수행되었다.

우리나라 하천제방에 대한 내부침식 파괴 연구 : 사례연구 (River Embankment Stability against Hydraulic Piping Failure in Korea)

  • 권교근;한상현
    • 대한토목학회논문집
    • /
    • 제26권1C호
    • /
    • pp.33-42
    • /
    • 2006
  • 우리나라 하천 제방은 유래를 알 수없는 오래 된 것이 많고 당시 공학적 배경 없이 주변에서 손쉽게 얻을 수 있는 재료를 사용하여 제방을 축조하였기 때문에 근본적으로 많은 문제점을 내포하고 있다. 현재에 와서는 제체가 노후화 되고 최근 기상이변으로 인해 제방의 안전이 더욱 크게 위협받으면서 제방단면을 증대시키거나 수리시설을 전폭 재검토하는 등 설계 보완적 측면의 여러 가지 대책방안이 수립되고 있다. 그러나 제방을 신설하거나 기존단면을 보수 또는 단면을 증대함에 있어 재료특성을 제대로 반영하지 못하고 아직도 단편적인 설계기준을 전면 적용하거나 획일적인 다짐 시공관리 기준을 적용하는 정도로 그치는 경우도 있다. 따라서 본 검토에서는 제체의 재료특성에 주안점을 두어 Sherard(1953)가 제안한 균열 및 파이핑 저항등급을 소개, 이를 실제 파이핑이 발생한 국내 하천제방에 적용한 결과를 제시하고 유한요소법에 의한 침투해석을 실시하여 현행 설계기준에 의한 안정검토 결과와 비교해 보았다. 검토결과, 두 방법 모두 파이핑이 발생하는 것으로 평가되었으나 파이핑 저항등급은 다짐의 영향이 고려되어야 하고, 입도기준의 경우 주어진 재료의 입도와 제안된 입도기준과의 일치도를 정량적으로 제시하기 어려운 문제점을 보여 이에 대한 보완이 필요할 것으로 판단되었다.

충격 반향 신호 모니터링을 통한 철근 부식 진전에 따른 콘크리트 상태 평가 (Progressive Evaluation of Concrete Deterioration Caused by Chloride-Induced Steel Corrosion Using Impact-Echo Testing)

  • 피타젱 리즈키;줄피크산 아흐마드 무크티;기성훈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권3호
    • /
    • pp.37-46
    • /
    • 2024
  • 본 연구에서는 충격반향법(IE)을 활용하여 철근 부식 진전에 따른 콘크리트 손상 상태를 모니터링하였다. 길이 1500 mm, 폭 400 mm, 두께 200 mm를 갖는 세 개의 철근 콘크리트 시험체를 제작하였다. 각 시험체는 보통 포틀랜드 시멘트, 고로 슬래그 미분말, 플라이 애쉬를 혼합한 세 가지 콘크리트 배합을 활용하여 제작하여, 결합재 특성에 따른 손상특성을 관찰하였다. 콘크리트 내 철근 부식은 3% NaCl 용액에서 35일 주기의 습윤 및 건조 포화 과정을 거친 후 0.5 A 전류를 인가하여 가속화되었다. 전류인가 전 습윤-건조반복(철근부식 환경조성 또는 잠재기)단계에서 수집된 초기 IE 데이터는 건조상태가 IE 신호에 미치는 영향이 크기 않음을 보여주었다. 전류를 인가한 후에는 인가 시간 증가에 따라 IE 탁월주파수와 콘크리트 P파속도의 점진적인 감소 특성을 관찰할 수 있었다. 이러한 실험결과는 IE 데이터 모니터링으로 철근 부식으로 인한 콘크리트의 점진적 손상의 주요 특성(내부 손상 개시 및 전파 속도 등)을 포착할 수 있음을 보여준다. 따라서, 철근 부식에 따른 콘크리트의 점진적 손상의 평가 및 예측에 IE 모니터링이 효과적으로 활용될 수 있을 것으로 기대한다.

세 명의 대한민국 제 V형 당원축적근육병(McArdle 병) 환자들의 유전학적 및 임상적 특성 보고 (The Clinical and Genetic Characteristics of Three Korean Patients with Glycogen Storage Disease Type V (McArdle Disease))

  • 이성희;강은구;김윤명;이범희;김구환;유한욱
    • 대한유전성대사질환학회지
    • /
    • 제16권2호
    • /
    • pp.93-101
    • /
    • 2016
  • 목적: McArdle 병은 당원분해의 주요 속도 조절 단계인 당원인산화의 장애로 운동 초기에 적절한 에너지 공급이 이루어지지 않아 운동내성 및 근력약화가 발생하는 상염색체 열성 근육병으로, 저자의 관점 하에 현재까지 보고된 대한민국 McArdle 병은 4례로, 본 논문은 대한민국 McArdle 병 환자를 추가 보고하고 이들의 임상증상 및 유전학적 변이를 밝히고자 한다. 방법: 2006년부터 2011년까지 임상증상과 일반 혈액 및 생화학 검사, 그리고 PYGM 유전자 검사로 확진된 총 3명의 McArdle 병 환자의 전자 차트를 후향적으로 검토하여, 검사 소견, 시행된 운동요법과 약물치료, 그리고 예후를 확인하였다. 돌연변이 분석은 말초 혈액에서 분리한 DNA에서 genomic DNA를 분리하고, primer를이용해PYGM의 20개 exon과 intronic flanking 배열을 증폭한 후 전기영동으로 DNA 염기서열을 분석하였다. 결과: 세 증례의 증상 발생 평균 연령은 $10.33{\pm}4.73$ 세로, 공통적으로 심한 근육통, 근육부종을 동반한 잦은 횡문근융해증, 높은 기저 혈청 크레아틴키나아제과 마이오글로빈 농도, 뚜렷하지 않은 second wind phenomenon을 보였다. 근육생검 결과, 증례 1은 정상소견을 보였으나, 증례 2는 subsarcolemmal 공간 내 당원침착과 적색열의 퇴행 및 괴사, 증례 3은 periodic acid Schiff stain에 염색되는 물질을 갖는 공포와 내핵을 포함한 근섬유 소견을 보여 당원축적증에 합당한 양상을 보였다. 결론: PYGM 염기서열 분석 결과에서는 증례 1에서 $p.Arg50^*$;p.Trp798Arg, 증례 2에서 $p.Arg50^*$;p.Glu779 del, 증례 3에서 $p.Asp511Thrfs^*28$;p.Phe710 del 복합 이형 접합자 돌연변이를 보였다.

  • PDF

의류소매업에서의 RFID 이점에 대한 탐색적 연구 (An Exploratory Study of REID Benefits for Apparel Retailing)

  • 김혜정;김은영
    • 한국의류학회지
    • /
    • 제30권12호
    • /
    • pp.1697-1707
    • /
    • 2006
  • 최근 정보기술 분야에서 새로이 부상하고 있는 RFID는 기존의 노동비용을 절감하고 재고관리를 개선하며, 또한 효율적인 사업모델 창출을 통해 판매를 증가시킬 수 있는 혁신적인 정보기술로 소개되고 있다. 따라서, 이 새로운 정보기술의 채택이 의류소매업에 가져올 수 있는 이점은 무엇이며, 또한 무엇이 RFID 기술을 실용화하는 데에 성공적 요인이 될 것인지를 생각해 볼 시점이다. 본 연구는 RFID기술에 대한 의류소매업자의 현실적 인식수준과 그들이 예측하는 RFID잠재적 이점을 탐색하고자 하였다 또한 이를 통해 의류소매업에서 RFID 실행가능성을 예측해 보고자 하였다. RFID 기술에 대한 경험적 연구가 매우 드문 시점에서, 본 연구는 미국 내 소매업자들을 대상으로 집중집단면접(Focus group interview)를 실시하였다. 질적 내용 분석 결과, 총 150개의 RFID관련 문항이 도출되었고, 이는 다시 다섯 개의 RFID 이점 차원에 따라 31개의 속성으로 분류되었다. RFID 기술과 그의 이점에 대해 소매업자들은 이 기술이 현존하는 유통 공급망 체계를 보다 신속, 효과적으로 만들 것으로 인식하고 있었다. 그러나 실제 이 기술에 대한 채택은 아직까지 소수의 혁신적 기업만이 시도하는 초기 채택단계 이전에 머무르고 있었다. 한편 의류 소매업자들이 인식한 중요한 RFID 이점은 다섯 차원, 즉 (1) 물류 및 재고관리의 가시성과 가속성, (2) 수익률 향상, (3)고객 서비스, (4) 보안성, (5) 고용생산성으로 밝혀졌다. 이러한 결과는 RFID가 신속하고 효율적인 유통 공급망의 관리, 매장 운영 및 관리의 개선, 그리고 고객서비스 강화에 중요한 잠재력을 지닌다고 제시한 선행연구들의 이론적 가설 및 제언을 지지하였다. 따라서 본 연구는 의류소매업에서 RFID 기술에 대한 학문적 연구 및 실무적 접근 방향을 위한 기초자료를 제시하고 있다.2%, Bacillus cereus가 0.0%에서 29.4%, Clostridium perfringens는 0.0%에서 23.1%, Escherichia coli는 0.0%에서 35.0%로 검출되었다. Escherichia coli O157:H7, Salmonella spp., Vibrio parahaemolyticus, Listeria monocytogenes, Yersinia enterocolitica, Campylobacter jejuni는 검출되지 않았다. 이 연구는 신선한 야채에서의 병원체에 대한 기초 자료로 활용 가능할 것이라 기대된다.m}1.82$로서 명도와 황색도가 다소 낮게 나타났다. 청국장은 각각 $35.62{\pm}2.05,\;6.31{\pm}0.37$$13.50{\pm}0.78$로 나타나 명도와 황색도에 있어서 다소 낮게 나타났다.m25$에 9.4%를 나타내었다. 신체발달점수에서 남대생은 68.3%가 $75\sim85$이었고, 86 이상이 25.3%로 나타난 반면, 여대생은 표준범위가 63.6%의 분포를 나타내었다. 여대생의 나트륨 섭취는 연령과 0.082의 유의성을 나타내었고, 남대생의 복부 지방률은 연령과 0.011의 유의적 차이를 나타내었으며, 여대생의 체단백질랑은 나트륨섭취와 -0.276의 음의 상관관계를 나타내었다. 따라서 본 조사에 의하면 탄수화물:단백질:지방 비율이 $46\sim54:16\sim17:30$ 이상의 수준이었고, 섬유소는 권장량의 20%, 칼슘은 권장량의 $77\sim83%$, 나트륨은 권장량의 $2\sim3$배를 섭취하였는데, 이러한 섭취경향은 체성분에서 특히 남대생 94%가 체단백질량이 표준이상인 반면 남대생 86.4%가 체무기질량이 표준이하를 나타내었으며,

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

벼 재배 환경 중 molinate의 휘산과 공기 중 고추약해 발현농도 (Volatilization of molinate in paddy rice ecosystem and its concentration in air causing phytotoxicity to chili pepper)

  • 박병준;최주현;김찬섭;임건재;오병렬;심재한
    • 농약과학회지
    • /
    • 제9권1호
    • /
    • pp.70-80
    • /
    • 2005
  • 수도용 제초제 molinate에 대하여 벼 재배환경에서 휘산양상과 공기 중 고추에 대한 약해증상 및 발현 농도설정 시험을 수행한 결과 물 중 휘산양상은 $35^{\circ}C$, 20 L/min에서 47시간 후의 누적 휘산비가 22.7%였고, $25^{\circ}C$, 10 L/min에서는 3.2%로 7배 이상이 차이를 보였다. 벼 재배 포장에 150 g/1,000 $m^2$의 약량으로 살포된 molinate의 공기 중 농도는 지면으로부터 60 cm 높이에서 곡간지와 평야지는 각각 18.17과 11.59 ${\mu}g/m^2$ 수준으로 살포 당일에 최고 휘산량을 보였고, 처리 후 20일에는 $0.18{\sim}0.51{\mu}g/m^3$로 95% 이상이 감소되었으며, 두 지역 모두 휘산 양상은 비슷하였다. 높이 간의 공기 중 molinate 농도는 지표면으로부터 60 cm 높이에서 180 cm높이 보다 2배 이상이 분포되었다. 한편 인근에 재배되고 있는 고추 신엽에서 엽록소가 파괴되면서 잎 표면이 오므라드는 증상이 약제 살포 3일만에 발생하였으며, 약해가 심하게 나타난 잎의 molinate 잔류량은 $0.004{\sim}0.006$ mg/kg 수준으로 검출되었다. 공기 중 molinate에 의한 고추 생육저해는 $6.8{\mu}g/m^3$ 농도에서는 노출 3일째에 약해가 발현되어 4일째는 약해 증상이 심하게 나타났고, $13.6{\mu}g/m^3$ 농도에서는 노출 2일째에 발현되었다. 한편 수경재배에 의한 고추약해는 물 중 $300{\mu}g/L$ 농도에서 10일 후에 약해가 발현되었다. 약해고추의 회복은 신선한 공기가 공급되었을 때 시일이 경과되면서 약해 받은 잎은 고사되어 없어지고 신엽이 새로 발생되어 4주 후에 정상고추와 비슷한 생장을 하였다.

백서 설신경 압박손상모델에서 신경성장인자 유전자 주입이 신경재생에 미치는 영향 (EFFECT OF NERVE GROWTH FACTOR GENE INJECTION ON THE NERVE REGENERATION IN RAT LINGUAL NERVE CRUSH-INJURY MODEL)

  • 고은봉;정헌종;안강민;김성민;김윤희;장정원;이종호
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제28권5호
    • /
    • pp.375-395
    • /
    • 2006
  • Purpose: Lingual nerve (LN) damage may be caused by either tumor resection or injury such as wisdom tooth extraction, Although autologous nerve graft is sometimes used to repair the damaged nerve, it has the disadvantage of necessity of another operation for nerve harvesting. Moreover, the results of nerve grafting is not satisfactory. The nerve growth factor (NGF) is well-known to play a critical role in peripheral nerve regeneration and its local delivery to the injured nerve has been continuously tried to enhance nerve regeneration. However, its application has limitations like repeated administration due to short half life of 30 minutes and an in vivo delivery model must allow for direct and local delivery. The aim of this study was to construct a well-functioning $rhNGF-{\beta}$ adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with enhanced and extended secretion of hNGF from the injured nerve by injecting $rhNGF-{\beta}$ gene directly into crush-injured LN in rat model. Materials and Methods: $hNGF-{\beta}$ gene was prepared from fetal brain cDNA library and cloned into E1/E3 deleted adenoviral vector which contains green fluorescence protein (GFP) gene as a reporter. After large scale production and purification of $rhNGF-{\beta}$ adenovirus, transfection efficiency and its expression at various cells (primary cultured Schwann cells, HEK293 cells, Schwann cell lines, NIH3T3 and CRH cells) were evaluated by fluorescent microscopy, RT-PCR, ELISA, immunocytochemistry. Furthermore, the function of rhNGF-beta, which was secreted from various cells infected with $rhNGF-{\beta}$ adenovirus, was evaluated using neuritogenesis of PC-12 cells. For in vivo evaluation of efficacy of $rhNGF-{\beta}$ adenovirus, the LNs of 8-week old rats were exposed and crush-injured with a small hemostat for 10 seconds. After the injury, $rhNGF-{\beta}$ adenovirus($2{\mu}l,\;1.5{\times}10^{11}pfu$) or saline was administered into the crushed site in the experimental (n=24) and the control group (n=24), respectively. Sham operation of another group of rats (n=9) was performed without administration of either saline or adenovirus. The taste recovery and the change of fungiform papilla were studied at 1, 2, 3 and 4 weeks. Each of the 6 animals was tested with different solutions (0.1M NaCl, 0.1M sucrose, 0.01M QHCl, or 0.01M HCl) by two-bottle test paradigm and the number of papilla was counted using SEM picture of tongue dorsum. LN was explored at the same interval as taste study and evaluated electro-physiologically (peak voltage and nerve conduction velocity) and histomorphometrically (axon count, myelin thickness). Results: The recombinant adenovirus vector carrying $rhNGF-{\beta}$ was constructed and confirmed by restriction endonuclease analysis and DNA sequence analysis. GFP expression was observed in 90% of $rhNGF-{\beta}$ adenovirus infected cells compared with uninfected cells. Total mRNA isolated from $rhNGF-{\beta}$ adenovirus infected cells showed strong RT-PCR band, however uninfected or LacZ recombinant adenovirus infected cells did not. NGF quantification by ELISA showed a maximal release of $18865.4{\pm}310.9pg/ml$ NGF at the 4th day and stably continued till 14 days by $rhNGF-{\beta}$ adenovirus infected Schwann cells. PC-12 cells exposed to media with $rhNGF-{\beta}$ adenovirus infected Schwann cell revealed at the same level of neurite-extension as the commercial NGF did. $rhNGF-{\beta}$ adenovirus injected experimental groups in comparison to the control group exhibited different taste preference ratio. Salty, sweet and sour taste preference ratio were significantly different after 2 weeks from the beginning of the experiment, which were similar to the sham group, but not to the control group.

NaClO2를 이용한 NO 산화 특성 (Characteristics of NO Oxidation Using NaClO2)

  • 이기만;변영철;고동준;신동남;김경태;고경보;조무현;남궁원;목영선
    • Korean Chemical Engineering Research
    • /
    • 제46권5호
    • /
    • pp.988-993
    • /
    • 2008
  • 고정층 반응기에 충진한 $NaClO_2$에 의한 NO 산화특성을 온도와 가스조건 그리고 공간속도 등을 변화시켜가며 알아보았다. $NaClO_2$와 NO의 반응은 온도에 크게 의존함을 알 수 있었다. $110^{\circ}C$까지 $NaClO_2$와 NO의 반응성은 천천히 증가하고 그 이후의 온도에서는 빠르게 증가하였으며 $170^{\circ}C$ 부근에서 가장 높은 반응성을 나타내는 것을 확인하였다. 하지만 $190^{\circ}C$ 이상의 온도에서는 $NaClO_2$가 NaCl, $NaClO_3$, 상전이하여 NO와의 반응성이 나타나지 않았다. $NaClO_2$와 NO 반응의 주 생성물은 $NO_2$였으며 가스상 형태의 ClNO, $ClNO_2$ 등이 부산물로 나타났다. 이는 $NaClO_2$에 의한 NO의 산화물인 $NO_2$$NaClO_2$가 반응하여 가스상 부산물인 OClO를 생성하고, 생성된 OClO가 잔류하는 NO를 $NO_2$로 산화시키며 발생되는 Cl에 의한 것임을 확인하였다. 이와 함께 수분 및 산소의 변화는 NO 산화에 주는 영향이 미미하다는 것을 알 수 있었다.