• International Journal of Railway
• /
• v.4 no.2
• /
• pp.34-41
• /
• 2011

Using a test run data, the dynamics of the interface between the catenary and pantograph constituting the current collection system in high-speed trains are investigated. The test run signals are analyzed to determine the dynamic parameters critical to the current collection performance. There are found to be frequency components of the pantograph motion that are dependent on train speed as well as components that are stationary such as the resonant mode of the panhead suspension in the pantograph. From contact force measurement using load cell, the mean contact force was found to be stable while the fluctuating component was found to be dependent on the range of the frequency of the pantograph motion taken into account. The finding implies that numerical investigations reported in the literature that are based on lumped element models of the catenary and/or pantograph provide accurate predictions on the mean value but are of limited use in estimating fluctuation of the contact force. It is concluded that simulation studies based on lumped-element models which do not incorporate panhead structural vibration modes is inaccurate at high train speeds.

• Steel and Composite Structures
• /
• v.31 no.5
• /
• pp.437-452
• /
• 2019

In this study, in-situ static and dynamic tests of four pre-stressed concrete (PC) track beams with different span lengths and curvatures in a straddle monorail transit system were reported. In the static load tests, the strain and deflection at critical sections of the PC track beams were measured to determine the load bearing capacity and stiffness. The dynamic responses of strain, deflection, acceleration, and displacement at key positions of the PC track beams were measured under different train speeds and train loads to systematically study the dynamic behaviors of the PC track beams. A three-dimensional finite element model of the track beam-vehicle coupled vibration system was established to help understand the dynamic behavior of the system, and the model was verified using the test results. The research results show that the curvature, span length, train speed, and train loads have significant influence on the dynamic responses of the PC track beams. The dynamic performance of the PC track beams in the curve section is susceptible to dynamic loads. Appropriate train loads can effectively reduce the impact of the train on the PC track beam. The PC track beams allow good riding comfort.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.353-363
• /
• 2019

This paper presents a comprehensive simulation and assessment of gas dispersion above sea from a subsea release using a Computational Fluid Dynamics (CFD) approach. A 3D CFD model is established to evaluate the behavior of flammable gas above sea, and a jack-up drilling platform is included to illustrate the effect of flammable gas cloud on surface vessels. The simulations include a matrix of scenarios for different surface release rates, distances between surface gas pool and offshore platform, and wind speeds. Based on the established model, the development process of flammable gas cloud above sea is predicted, and the dangerous area generated on offshore platform is assessed. Additionally, the effect of some critical factors on flammable gas dispersion behavior is analyzed. The simulations produce some useful outputs including the detailed parameters of flammable gas cloud and the dangerous area on offshore platform, which are expected to give an educational reference for conducting a prior risk assessment and contingency planning.

• Structural Engineering and Mechanics
• /
• v.78 no.5
• /
• pp.519-528
• /
• 2021

One of the most efficient designs of solar trackers for photovoltaic panels is the single-axis tracker, which holds the panels along a torque tube that is driven by a motor at the central section. These trackers have evolved to become extremely slender structures due to mechanical optimization against static load and the need of cost reduction in a very competitive market. Owing to the corresponding decrease in mechanical resistance, some of these trackers have suffered aeroelastic instability even at moderate wind speeds, leading to catastrophic failures. In the present work, an analytical and experimental approach has been developed to study that phenomenon. The analytical study has led to identify the dimensionless parameters that govern the motion of the panel-tracker structure. Also, systematic wind tunnel experiments have been carried out on a 3D aeroelastic scale model. The tests have been successful in reproducing the aeroelastic phenomena arising in real-scale cases and have allowed the identification and a close characterization of the phenomenon. The main results have been the determination of the critical velocity for torsional galloping as a function of tilt angle and a calculation methodology for the optimal sizing of solar tracker shafts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.3
• /
• pp.441-450
• /
• 2022

The introduction of autonomous underwater gliders (AUGs) specifically addresses the reduction of operational costs that were previously prohibited with conventional autonomous underwater vehicles (AUVs) using a "scaling-down" design philosophy by utilizing the characteristics of autonomous drifters to far extend operation duration and coverage. Long-duration, wide-area missions raise the cost and complexity of in-water testing for novel approaches to autonomous mission planning. As a result, a simulator that supports the rapid design, development, and testing of autonomy solutions across a wide range using software-in-the-loop simulation at faster-than-real-time speeds becomes critical. This paper describes a faster-than-real-time AUG simulator that can support high-resolution bathymetry for a wide variety of ocean environments, including ocean currents, various sensors, and vehicle dynamics. On top of the de facto standard ROS-Gazebo framework and open-sourced underwater vehicle simulation packages, features specific to AUGs for ocean mapping are developed. For vehicle dynamics, the next-generation hybrid autonomous underwater gliders (Hybrid-AUGs) operate with both the buoyancy engine and the thrusters to improve navigation for bathymetry mappings, e.g., line trajectory, are is implemented since because it can also describe conventional AUGs without the thrusters. The simulation results are validated with experiments while operating at 120 times faster than the real-time.

• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.287-290
• /
• 2022

Compressed-water-type launching devices convert the force from compressed water into force-launching underwater structures, such as torpedos and autonomous underwater vehicles. In particular, the overpressure wave in the launching tube is a critical design factor for the launching device. This paper presents a simplified formula for simulating overpressure waves in the launching tube of a compressed-water-type launching device. Scaled model experiments were performed to obtain actual measurement data of overpressure waves in a launching tube with varying piston speeds to examine the practical applicability of the simplified formula. The main factor of the simplified formula was estimated using an optimization technique. The time history of the overpressure waves was satisfactorily simulated using the estimated factor values and showed consistency with the measurement data. In addition, the trend of change by the piston speed of the estimated factors was reviewed, and the practical applicability was demonstrated. A systematic study of the factors influencing the overpressure waves in launching tubes will be possible using experimental data for more various conditions and the proposed simplified formula.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.1
• /
• pp.34-44
• /
• 2023

Objective: The purpose of this study was to examine the effects of increasing running speed on human stability by comparing the Lyapunov Exponent (LyE) and Coefficient of Variation (CV) methods, with the goal of identifying key variables and uncovering new insights. Method: Fourteen adult males (age: 24.7 ± 6.4 yrs, height: 176.9 ± 4.6 cm, weight: 74.7 ± 10.9 kg) participated in this study. Results: In the CV method, significant differences were observed in ankle (flexion-inversion/eversion; p < .05) and hip joint (internal-external rotation; p < .05) movements, while the center of mass (COM) variable in the coronal axis movements showed a significant difference at the p < .001 level. In the LyE method, statistical differences were observed at the p < .05 level in knee (flexion-extension), hip joint (internal-external rotation) movements, and COM across all three directions (sagittal, coronal, and transverse axis). Conclusion: Our results revealed that the stability of the human body is affected at faster running speeds. The movement of the COM and ankle joint were identified as the most critical factors influencing stability. This suggests that LyE, a nonlinear time series analysis, should be actively introduced to better understand human stabilization strategies.

• Steel and Composite Structures
• /
• v.48 no.4
• /
• pp.429-441
• /
• 2023

This research presents an advanced finite element formulation for analyzing the vibratory behaviour of tapered composite shaft rotors, taking into account the impact of the draft angle on the stiffness of the composite shaft laminate. The vibration response of the shaft rotating around its axis is studied using both the finite element hierarchical method and the classical finite element formulation, based on the theory of transverse shear deformation, rotary inertia, gyroscopic effect, and coupling effect due to the stratification of the composite layers of the shaft. The study also includes the development of a program to calculate the Eigen frequencies and critical speeds of the system, and the obtained results are compared with those available in the literature. This research provides valuable insights into the vibratory behaviour of tapered composite shaft rotors and can be useful for designing and optimizing such structures in various industrial applications.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.33-53
• /
• 2024

This paper presents a comprehensive investigation into the optimization of Flight Management Systems (FMS) with a particular emphasis on data processing efficiency by conducting a comparative study with conventional methods to edge-computing technology. The objective of this research is twofold. Firstly, it evaluates the performance of FMS navigation systems using conventional and edge computing methodologies. Secondly, it aims to extend the boundaries of knowledge in edge-computing technology by conducting a rigorous analysis of terrain data and its implications on flight path optimization along with communication with ground stations. The study employs a combination of simulation-based experimentation and algorithmic computations. Through strategic intervals along the flight path, critical parameters such as distance, altitude profiles, and flight path angles are dynamically assessed. Additionally, edge computing techniques enhance data processing speeds, ensuring adaptability to various scenarios. This paper challenges existing paradigms in flight management and opens avenues for further research in integrating edge computing within aviation technology. The findings presented herein carry significant implications for the aviation industry, ranging from improved operational efficiency to heightened safety measures.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.753-759
• /
• 2011

Protected crop production has been popular in Korea as well as in other countries. Intensive and continuous monitoring and control of the environment, which is labor- and time-consuming, is critical for stable crop productivity and profitability, otherwise damage could be happened due to unfavorable ambient and soil conditions. In the study, potential utilization of smartphone and remote access application in protected crop production environment was investigated. Tested available remote access applications provided functions of mouse click (left and right buttons), zooming in and out, and screen size and color resolution control. Wi-Fi data communication speeds were affected by signal intensity and user place. Data speeds at high (> -55 dBm), medium (-70~-56 dBm), and low (< -71 dBm) signal intensity levels were statistically different (${\alpha}=0.05$). Means of data communication speed were 6.642, 4.923, and 2.906 Mbps at hot spot, home, and office, respectively, and the differences were significant at a 0.05 level. Smart phone and remote access application were applied successfully to remote monitoring (inside temperature and humidity, and outside precipitation, temperature, and humidity) and control (window and light on/off) of green house environment. Response times for monitoring and control were less than 1 s at all places for high signal intensity (> -55 dBm), but they were increased to 1 ~ 10 s at home and office and to 10 ~ 30 s at hot spot for low signal intensity (< -71 dBm) for Wi-Fi. Results of the study would provide useful information for farmers to apply these techniques for their crop production.